Related Manuals for Makita DCG180RMB
Summary of Contents for Makita DCG180RMB
- Page 1 INSTRUCTION MANUAL Cordless Caulking Gun BCG140 BCG180 013564 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model BCG140 BCG180 Max feed force 5000 N Feed speed 0 - 28 mm/s with short (300ml) holder 214 mm Stroke with long (600ml) holder 350 mm with short (300ml) holder 404 mm Overall length with long (600ml) holder 538 mm Standard battery cartridge BL1415... - Page 3 Electrical safety Makita Corporation responsible Power tool plugs must match the outlet. Never manufacturer declare that the following Makita modify the plug in any way. Do not use any machine(s): adapter plugs with earthed (grounded) power Designation of Machine: tools. Unmodified plugs and matching outlets will Cordless Caulking Gun reduce risk of electric shock.
- Page 4 15. Dress properly. Do not wear loose clothing or objects, that can make a connection from one jewellery. Keep your hair, clothing, and gloves terminal another. Shorting the battery away from moving parts. Loose clothes, jewellery terminals together may cause burns or a fire. or long hair can be caught in moving parts.
-
Page 5: Functional Description
Do not disassemble battery cartridge. FUNCTIONAL DESCRIPTION If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns CAUTION: and even an explosion. Always be sure that the tool is switched off and the •... - Page 6 Overloaded: • Overload warning lamp The tool is operated in a manner that causes it to draw an abnormally high current. 1. Warning lamp In this situation, release the switch trigger on the tool and stop the application that caused the tool to become overloaded.
- Page 7 To remove the holder joint, follow above procedure in Lighting up the lamp reverse. CAUTION: NOTE: Do not look in the light or see the source of light • There types holders (optional • directly. accessory), short holder (300ml) and long holder (600ml).
- Page 8 Installing holder 013567 Insert the cartridge into the holder as illustrated. 013561 Push the rod gently until the piston touches the bottom of the cartridge. To remove the cartridge, pull the rod backwards until it stops, then lift out the cartridge. Installing the cartridge into the long holder (600ml) 1.
-
Page 9: Operation
Attach the rubber ring, the nozzle and the holder cap. Installing film type pack Make sure holder cap is tightened firmly. NOTICE: NOTICE: Make sure the piston B is attached to the rod. Do • Clean the holder with appropriate solvent after •... -
Page 10: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Piston A • Piston B • Piston C •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 885189-229...