hit counter script
NEC UM351WGi-B Command Reference Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. UM351WGi-B
  6. Command reference manual

NEC UM351WGi-B Command Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
Control Command
Reference Manual
©NEC Display Solutions, Ltd. 2014-2020
BDT140013
Revision 7.1

Advertisement

Table of Contents
loading

Related Manuals for NEC UM351WGi-B

Summary of Contents for NEC UM351WGi-B

  • Page 1: Projector Control Command Reference Manual

    Projector Control Command Reference Manual ©NEC Display Solutions, Ltd. 2014-2020 BDT140013 Revision 7.1...

  • Page 2: Introduction

    Great care has been taken in the preparation of this reference manual; however, should you notice any questionable points, errors or omissions, please contact us. Notwithstanding article 3. NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using this reference manual.

  • Page 3: Table Of Contents

    [ 050. REMOTE KEY CODE ] ..........................38 3.20 [ 051. SHUTTER CLOSE ] ..........................40 3.21 [ 052. SHUTTER OPEN ]............................ 41 3.22 [ 053. LENS CONTROL ] ............................ 42 3.23 [ 053-1. LENS CONTROL REQUEST ] ......................44 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 4 [ 305-1. BASE MODEL TYPE REQUEST ] ......................81 3.51 [ 305-2. SERIAL NUMBER REQUEST ] ......................82 3.52 [ 305-3. BASIC INFORMATION REQUEST ] ...................... 83 3.53 [ 319-10. AUDIO SELECT SET ] ......................... 85 Revision History ........................87 ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 5: Connecting An External Device

    Connect the serial cable to the PC CONTROL port of the projector. The pin assignment of the serial cable is shown below. <Connection between the PC CONTROL port (D-SUB 9P) and external device> Pin number Projector External device (Not used) (Not used) (Not used) (Not used) (Not used) (Not used) (Not used) (Not used) ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 6 This method connects a PC via a wireless LAN by connecting a wireless LAN unit to the projector. For information about the available wireless LAN units, see the operation manual of the model in use. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 7: Communication Conditions

    Supported standard IEEE802.3 (10BASE-T) IEEE802.3u (100BASE-TX, Auto-Negotiation)  Wireless LAN See the operation manual of the wireless LAN unit to be used.  Port number Use TCP port number "7142" for sending and receiving commands. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 8: Command List

    Selects the profile number of the reference lens memory. 053-11. LENS PROFILE REQUEST Gets the selected profile number of the reference lens memory. 060-1. GAIN PARAMETER REQUEST 3 Gets adjusted values of the picture, volume, and backlight. ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 9 Gets the base model type of the projector. 305-2. SERIAL NUMBER REQUEST Gets the serial number of the projector. 305-3. BASIC INFORMATION REQUEST Gets the operation status of the projector. 319-10. AUDIO SELECT SET Sets the audio select. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 10: Understanding Command Details

    ① Add all the data preceding the checksum. "20h + 81h + 01h + 60h + 01h + 00h = 103h" ② Use the low-order one byte "03h" of the addition result obtained in ① as the checksum. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 11: Responses

    A response is returned with the cause of the failed command execution indicated in <ERR1> and <ERR2>. (Example) POWER ON  Command 02h 00h 00h 00h 00h 02h  Response A2h 00h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 12: Error Code List

    The command cannot be accepted because the power is off. The command execution failed. There is no authority necessary for the operation. The specified gain number is incorrect. The specified gain is invalid. Adjustment failed. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 13: Command Details

    DATA1 - DATA12 ....Error information is provided. A bit set to "0" indicates that the data is normal, and a bit  set to "1" indicates an error. For an error information list, see the next page. ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 14 Bit5 None (fixed to 0) Bit2 System error has occurred. Bit6 None (fixed to 0) (Slave CPU) Bit3 System error has occurred Bit7 None (fixed to 0) (Formatter) DATA10 - 12 Reserved for the system ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 15: [ 015. Power On ]

    While this command is turning on the power, no other command can be accepted. Command 02h 00h 00h 00h 00h 02h Response  When the command succeeds 22h 00h <ID1> <ID2> 00h <CKS>  When the command fails A2h 00h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 16: [ 016. Power Off ]

    While this command is turning off the power (including the cooling time), no other command can be accepted. Command 02h 01h 00h 00h 00h 03h Response  When the command succeeds 22h 01h <ID1> <ID2> 00h <CKS>  When the command fails A2h 01h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 17: [ 018. Input Sw Change ]

    For the values of input terminal, see the Appendix "Supplementary Information by Command".  Command example The following command switches the input terminal to a video port (DATA01: 06h). 02h 03h 00h 00h 02h 01h 06h 0Eh ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 18 22h 03h <ID1> <ID2> 01h <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error (no signal switch is made).  When the command fails A2h 03h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 19: [ 020. Picture Mute On ]

    ・ Video signal switch Command 02h 10h 00h 00h 00h 12h Response  When the command succeeds 22h 10h <ID1> <ID2> 00h <CKS>  When the command fails A2h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 20: [ 021. Picture Mute Off ]

    Turns the picture mute off. Command 02h 11h 00h 00h 00h 13h Response  When the command succeeds 22h 11h <ID1> <ID2> 00h <CKS>  When the command fails A2h 11h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 21: [ 022. Sound Mute On ]

    ・ Sound volume adjustment Command 02h 12h 00h 00h 00h 14h Response  When the command succeeds 22h 12h <ID1> <ID2> 00h <CKS>  When the command fails A2h 12h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 22: [ 023. Sound Mute Off ]

    Turns the sound mute off. Command 02h 13h 00h 00h 00h 15h Response  When the command succeeds 22h 13h <ID1> <ID2> 00h <CKS>  When the command fails A2h 13h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 23: [ 024. Onscreen Mute On ]

    ・ Video signal switch Command 02h 14h 00h 00h 00h 16h Response  When the command succeeds 22h 14h <ID1> <ID2> 00h <CKS>  When the command fails A2h 14h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 24: [ 025. Onscreen Mute Off ]

    Turns the onscreen mute off. Command 02h 15h 00h 00h 00h 17h Response  When the command succeeds 22h 15h <ID1> <ID2> 00h <CKS>  When the command fails A2h 15h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 25: [ 030-1. Picture Adjust ]

    ① The following command sets brightness to "10". 03h 10h 00h 00h 05h 00h FFh 00h 0Ah 00h 21h ② The following command sets brightness to "-10". 03h 10h 00h 00h 05h 00h FFh 00h F6h FFh 0Ch ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 26 23h 10h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Execution result DATA02 0000h Ended successfully. Other than 0000h Ended with an error.  When the command fails A3h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 27: [ 030-2. Volume Adjust ]

    DATA02 Adjustment value (low-order 8 bits) DATA03 Adjustment value (high-order 8 bits)  Command example The following command set the sound volume to "10". 03h 10h 00h 00h 05h 05h 00h 00h 0Ah 00h 27h ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 28 23h 10h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Execution result DATA02 0000h Ended successfully. Other than 0000h Ended with an error.  When the command fails A3h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 29: [ 030-12. Aspect Adjust ]

    23h 10h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Execution result DATA02 0000h Ended successfully. Other than 0000h Ended with an error.  When the command fails A3h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 30: [ 030-15. Other Adjust ]

    Description DATA01 DATA01 DATA02 Adjustment target DATA02 LAMP ADJUST / LIGHT ADJUST DATA03 Adjustment mode Specify an absolute value Specify a relative value DATA04 Adjustment value (low-order 8 bits) DATA05 Adjustment value (high-order 8 bits) ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 31 23h 10h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Execution result DATA02 0000h Ended successfully. Other than 0000h Ended with an error.  When the command fails A3h 10h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 32: [ 037. Information Request ]

    <DATA87> - <DATA98> <CKS> Lamp usage time (DATA83 – DATA86) = 18000 / 3600 = 5 hours Information While the usage time can be obtained in one-second units, the information is updated at one-minute intervals. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 33: [ 037-3. Filter Usage Information Request ]

    DATA01 - 04 Filter usage time (seconds) DATA05 - 08 Filter alarm start time (seconds) Information If no time is defined, "-1" is returned.  When the command fails A3h 95h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 34: [ 037-4. Lamp Information Request 3 ]

    Lamp remaining life (%) Information "01h" (Lamp 2) in DATA01 is effective only for two-lamp projector models.  Command example The following command gets the lamp usage time. 03h 96h 00h 00h 02h 00h 01h 9Ch ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 35 ・ While the lamp usage time can be obtained in one-second units, the information is updated at one-minute intervals. ・ If the lamp replacement deadline is exceeded, a negative value is returned as the lamp remaining life (%). ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 36: [ 037-6. Carbon Savings Information Request ]

    [ 037-6. CARBON SAVINGS INFORMATION REQUEST ] Gets the Carbon Saving values on the projector. Command 03h 9Ah 00h 00h 01h <DATA01> <CKS> Data part Item Description DATA01 Target Total Carbon Savings Carbon Savings during operation ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 37 Maximum: 99999[kg]) DATA06 - 09 Carbon Savings (Milligram Maximum:999999[mg])  When the command fails A3h 9Ah <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>  Response example When the Carbon Savings value is 2460.06375[kg]. <ID1> <ID2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 38: [ 050. Remote Key Code ]

    <Key code list> Key code DATA01 DATA02 Key name POWER ON POWER OFF AUTO MENU DOWN RIGHT LEFT ENTER EXIT HELP MAGNIFY UP MAGNIFY DOWN MUTE PICTURE COMPUTER1 COMPUTER2 VIDEO1 S-VIDEO1 VOLUME UP VOLUME DOWN FREEZE ASPECT ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 39 When the command succeeds 22h 0Fh <ID1> <ID2> 01h <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error.  When the command fails A2h 0Fh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 40: [ 051. Shutter Close ]

    Closes the lens shutter. Command 02h 16h 00h 00h 00h 18h Response  When the command succeeds 22h 16h <ID1> <ID2> 00h <CKS>  When the command fails A2h 16h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 41: [ 052. Shutter Open ]

    Opens the lens shutter. Command 02h 17h 00h 00h 00h 19h Response  When the command succeeds 22h 17h <ID1> <ID2> 00h <CKS>  When the command fails A2h 17h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 42: [ 053. Lens Control ]

    Drives for 1 second in the direction of minus Information After sending "7Fh" (Drives in the direction of plus) or "81h" (Drives in the direction of minus) in DATA02, you can stop driving lens by sending "00h". ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 43 Ended with an error.  When the command fails A2h 18h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> Information While the lens is being driven, you can control the lens position without a stop by issuing the same command. ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 44: [ 053-1. Lens Control Request ]

    [ 053-1. LENS CONTROL REQUEST ] Gets adjusted values of the lens position. Command 02h 1Ch 00h 00h 02h <DATA01> 00h <CKS> Data part Item Description DATA01 Target Zoom Focus Lens Shift (H) Lens Shift (V) ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 45 DATA05 Lower limit of the adjustment range (high-order 8 bits) DATA06 Current value (low-order 8 bits) DATA07 Current value (high-order 8 bits)  When the command fails A2h 1Ch <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 46: [ 053-2. Lens Control 2 ]

    Specify an absolute value Specify a relative value DATA03 Adjustment value (low-order 8 bits) DATA04 Adjustment value (high-order 8 bits) Information If specifying “Stop” in DATA01, the Adjustment mode and Adjustment value are not referenced. ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 47 DATA01 Target Zoom Focus Lens Shift (H) Lens Shift (V) Stop DATA02 Adjustment mode Specify an absolute value Specify a relative value  When the command fails A2h 1Dh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 48: [ 053-3. Lens Memory Control ]

    Controls the lens memory. Information See [ 053-4. REFERENCE LENS MEMORY CONTROL ] for controlling the reference lens memory. Command 02h 1Eh 00h 00h 01h <DATA01> <CKS> Data part Item Description DATA01 Operation MOVE STORE RESET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 49 22h 1Eh <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Operation MOVE STORE RESET DATA02 Execution result Ended successfully. Ended with an error.  When the command fails A2h 1Eh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 50: [ 053-4. Reference Lens Memory Control ]

    ・ See [ 053-3. LENS MEMORY CONTROL ] for controlling the lens memory. ・ This command controls the profile number specified in [053-10 LENS PROFILE SET ]. Command 02h 1Fh 00h 00h 01h <DATA01> <CKS> Data part Item Description DATA01 Operation MOVE STORE RESET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 51 22h 1Fh <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Operation MOVE STORE RESET DATA02 Execution result Ended successfully. Ended with an error.  When the command fails A2h 1Fh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 52: [ 053-5. Lens Memory Option Request ]

    22h 20h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Target LOAD BY SIGNAL FORCED MUTE DATA02 Setting value  When the command fails A2h 20h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 53: [ 053-6. Lens Memory Option Set ]

    3.28 [ 053-6. LENS MEMORY OPTION SET ] Sets the lens memory. Command 02h 21h 00h 00h 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Target LOAD BY SIGNAL FORCED MUTE DATA02 Setting value ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 54 22h 21h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Target LOAD BY SIGNAL FORCED MUTE DATA02 Execution result Ended successfully. Ended with an error.  When the command fails A2h 21h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 55: [ 053-7. Lens Information Request ]

    Bit2 Focus Bit6 Reserved for the system Stop During operation Bit3 Lens Shift (H) Bit7 Reserved for the system Stop During operation  When the command fails A2h 22h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 56: [ 053-10. Lens Profile Set ]

    22h 27h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Profile number Profile 1 Profile 2 DATA02 Execution result Ended successfully. Ended with an error.  When the command fails A2h 27h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 57: [ 053-11. Lens Profile Request ]

    22h 28h <ID1> <ID2> 02h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Profile number Profile 1 Profile 2 DATA02 Reserved for the system  When the command fails A2h 28h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 58: [ 060-1. Gain Parameter Request 3 ]

    PICTURE / HUE PICTURE / SHARPNESS VOLUME LAMP ADJUST / LIGHT ADJUST  Command example The following command gets the adjusted value of the picture (brightness). 03h 05h 00h 00h 03h 00h 00h 00h 0Bh ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 59 Whether the default value is valid or invalid The default value is invalid. The default value is valid. DATA15 Reserved for the system DATA16  When the command fails A3h 05h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 60: [ 078-1. Setting Request ]

    DATA06 - 32 Reserved for the system Information For the values of the base model types, see the Appendix "Supplementary Information by Command".  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 61: [ 078-2. Running Status Request ]

    Standby (Sleep) Standby (Power saving) Power on Network standby Cooling Not supported － － Standby (error) DATA07 - 16 Reserved for the system  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 62: [ 078-3. Input Status Request ]

    Signal list number - 1 Not supported DATA03 Selection signal type 1 － － DATA04 Selection signal type 2 COMPUTER DVI-D VIDEO HDMI S-VIDEO DisplayPort COMPONENT VIEWER(6-10) Reserved for the system Not Source Input ― － VIEWER(1-5) ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 63 For information about the Selection signal type, see the Appendix "Supplementary Information by Command".  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>  Response example When the signal list number is10. 20h 85h <ID1> <ID2> 10h <DATA01> 09h <DATA03> - <DATA16> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 64: [ 078-4. Mute Status Request ]

    00h 85h 00h 00h 01h 03h 89h Response  When the command succeeds 20h 85h <ID1> <ID2> 10h <DATA01> - <DATA16> <CKS> Data part Item Description DATA01 Picture mute Not supported DATA02 Sound mute Not supported DATA03 Onscreen mute Not supported ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 65 Description DATA04 Forced onscreen mute Not supported DATA05 Onscreen display Not displayed Displayed Not supported DATA06 - 16 Reserved for the system  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 66: [ 078-5. Model Name Request ]

    20h 85h <ID1> <ID2> 20h <DATA01> - <DATA32> <CKS> Data part Item Description DATA01 - 32 Model name (NUL: termination character string)  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 67: [ 078-6. Cover Status Request ]

    When the command succeeds 20h 85h <ID1> <ID2> 01h <DATA01> <CKS> Data part Item Description DATA01 Status Normal (cover opened) Cover closed  When the command fails A0h 85h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 68: [ 079. Freeze Control ]

    When the command succeeds 21h 98h <ID1> <ID2> 01h <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error.  When the command fails A1h 98h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 69: [ 084. Information String Request ]

    Horizontal synchronous frequency Vertical synchronous frequency DATA02 Label/information string length (excluding NUL characters) DATA03 - ?? Label/information strings (NUL: termination character string)  When the command fails A0h D0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 70: [ 097-8. Eco Mode Request ]

    Value set for the eco mode Information For information about the values set for the eco mode, see the Appendix "Supplementary Information by Command".  When the command fails A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 71: [ 097-45. Lan Projector Name Request ]

    23h B0h <ID1> <ID2> 12h 2Ch <DATA01> - <DATA17> <CKS> Data part Item Description DATA01 - 17 Projector name (NUL: termination character string)  When the command fails A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 72: [ 097-155. Lan Mac Address Status Request2 ]

    A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>  Response example When the MAC address of the projector is "01h-23h-45h-67h-89h-ABh", the following response is returned. 23h B0h <ID1> <ID2> 08h 9Ah 00h 01h 23h 45h 67h 89h ABh <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 73: [ 097-198. Pip/Picture By Picture Request ]

    Gets the value set for the picture in picture and picture by picture. Command 03h B0h 00h 00h 02h C5h <DATA01> <CKS> Data part Item Description DATA01 Target MODE START POSITION SUB INPUT / SUB INPUT 1 SUB INPUT 2 SUB INPUT 3 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 74 Sub input setting value (when DATA01 is 0Ah "SUB INPUT 3") Information For the values of the Sub input setting value, see the Appendix "Supplementary Information by Command".  When the command fails A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 75: Edge Blending Mode Request ]

    Response  When the command succeeds 23h B0h <ID1> <ID2> 03h DFh 00h <DATA01> <CKS> Data part Item Description DATA01 Setting value  When the command fails A3h B0h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 76: [ 098-8. Eco Mode Set ]

    When the command succeeds 23h B1h <ID1> <ID2> 02h 07h <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error.  When the command fails A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 77: [ 098-45. Lan Projector Name Set ]

    When the command succeeds 23h B1h <ID1> <ID2> 02h 2Ch <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error.  When the command fails A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 78: [ 098-198. Pip/Picture By Picture Set ]

    Sub input setting value (when DATA01 is 09h "SUB INPUT 2") Sub input setting value (when DATA01 is 0Ah "SUB INPUT 3") Information For the values of the Sub input setting value, see the Appendix "Supplementary Information by Command". ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 79 START POSITION SUB INPUT / SUB INPUT 1 SUB INPUT 2 SUB INPUT 3 DATA02 Execution result Ended successfully. Ended with an error.  When the command fails A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 80: Edge Blending Mode Set ]

    23h B1h <ID1> <ID2> 03h DFh 00h <DATA01> <CKS> Data part Item Description DATA01 Execution result Ended successfully. Ended with an error.  When the command fails A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 81: [ 305-1. Base Model Type Request ]

    DATA14 Reserved for the system DATA15 Information For the values of the base model types, see the Appendix "Supplementary Information by Command".  When the command fails A0h BFh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 82: [ 305-2. Serial Number Request ]

    20h BFh <ID1> <ID2> 12h 01h 06h <DATA01> - <DATA16> <CKS> Data part Item Description DATA01 - 16 Serial number (NUL: termination character string)  When the command fails A0h BFh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 83: [ 305-3. Basic Information Request ]

    Standby (Power saving) Cooling Network standby DATA02 Content displayed Video signal displayed LAN displayed No signal Test pattern (user) displayed Viewer displayed Signal being switched － － Test pattern displayed DATA03 Selection signal type 1 － － ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 84 DATA10 - 15 Reserved for the system Information For information about which parameters are supported, see the Appendix "Supplementary Information by Command".  When the command fails A0h BFh <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 85: [ 319-10. Audio Select Set ]

    03h C9h 00h 00h 03h 09h <DATA01> <DATA02> <CKS> Data part Item Description DATA01 Input terminal DATA02 Setting value terminal specified COMPUTER DATA01 － － Information For the values of input terminal, see the Appendix "Supplementary Information by Command". ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 86 Execution result Ended successfully. Ended with an error. Information For the values of input terminal, see the Appendix "Supplementary Information by Command".  When the command fails A3h C9h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS> ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 87: Revision History

    Added the supported commands [030-12], [037], [037-6], [053], [053-1], [053-2], [053-3], [053-4], [053-5], [053-6], [053-7], [053-10], [053-11], [078-1], [078-2], [078-3], [078-4], [078-5], [097-198], [097-243-1], [098-8], [098-198], [098-243-1], [319-10] Updated the supported command [009] August 22, 2014 First version ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 88 NP-M403H / NP-M323H / NP-M353HS / NP-M323HS / NP-M303HS NP-M402W / NP-M362W / NP-M402X / NP-M362X / NP-M322X / NP-M282X / NP-M322W / NP-M352WS / NP-M302WS / NP-M332XS NP-M361X / NP-M311X / NP-M271X / NP-M311W / NP-M271W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 89 NP-PA600X / NP-PA500X / NP-PA550W / NP-PA500U NP-PH3501QL / NP-PH2601QL NP-PH1400U NP-PH1202HL / NP-PH1002HL NP-PH1000U NP-PX1005QL NP-PX1004UL NP-PX803UL NP-PX750U / NP-PX700W / NP-PX800X NP-PX651X / NP-PX581W NP-PX620X / NP-PX550W NP-PX602UL / NP-PX602WL NP-U321H NP-U300X / NP-U250X / NP-U310W / NP-U260W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 90 NP-PA803UL / NP-PA653UL NP-PA622X / NP-PA621U / NP-PA521U / NP-PA671W / NP-PA571W / does NOT support the following NP-PA721X / NP-PA621X command. 　037-3. FILTER USAGE NP-PA600X / NP-PA500X / NP-PA550W / NP-PA500U INFORMATION REQUEST NP-PH3501QL / NP-PH2601QL ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 91 NP-M230X / NP-M300W / NP-M260W / NP-M350XS / NP-M300XS / NP-M260XS / NP-M300WS / NP-M260WS NP-M403X / NP-M363X / NP-M323X / NP-M283X / NP-M403W / NP-M363W / NP-M323W / NP-M333XS / NP-M353WS / NP-M303WS / NP-M403H / NP-M323H / NP-M353HS / NP-M323HS / NP-M303HS ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 92 NP-VE281X / NP-VE280X / NP-VE281 / NP-VE280 NP4100 / NP4100W NP-M420X / NP-M420XV / NP-M350X / NP-M300X / NP-M260X / NP-M230X / NP-M300W / NP-M260W / NP-M350XS / NP-M300XS / NP-M260XS / NP-M300WS / NP-M260WS ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 93 NP-M403H / NP-M323H / NP-M353HS / NP-M323HS / NP-M303HS NP-M402W / NP-M362W / NP-M402X / NP-M362X / NP-M322X / NP-M282X / NP-M322W / NP-M352WS / NP-M302WS / NP-M332XS NP-M361X / NP-M311X / NP-M271X / NP-M311W / NP-M271W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 94 NP-PA622X / NP-PA621U / NP-PA521U / NP-PA671W / NP-PA571W / NP-PA721X / NP-PA621X NP-PH1202HL / NP-PH1002HL NP-PX651X / NP-PX581W NP-PX602UL / NP-PX602WL NP-U321H NP-UM301X / NP-UM301W / NP-UM361X / NP-UM351W / NP-UM352W NP-V332X / NP-V332W / NP-V302X / NP-V302W / NP-V302H ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 95 NP-U300X / NP-U250X / NP-U310W / NP-U260W NP-UM330X / NP-UM280X / NP-UM330W / NP-UM280W NP-V311W / NP-V281W / NP-V311X NP-V300X / NP-V260X / NP-V300W / NP-V260W / NP-V230X / NP-V260 / NP-V230 / NP-V260R NP-VE281X / NP-VE280X / NP-VE281 / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 96 [078-1. SETTING REQUEST] [305-1. BASE MODEL TYPE REQUEST] Selection signal type [078-3. INPUT STATUS REQUEST] [305-3. BASIC INFORMATION REQUEST] Sub input [097-198. PIP/PICTURE BY PICTURE REQUEST] [098-198. PIP/PICTURE BY PICTURE SET] Audio Select [319-10. AUDIO SELECT SET] ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 97: Connecting An External Device

    ○ － － － NP-V230X / NP-V260 / NP-V230 / NP-V260R － － － ○ － － － NP-VE303X / NP-VE303 ○ ○ ○ ○ － － － NP-VE281X / NP-VE280X / NP-VE281 / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 98: Standby Mode Setting For Receiving Commands

    NP-V300X / NP-V260X / NP-V300W / NP-V260W NORMAL, POWER-SAVING NORMAL NP-V230X / NP-V260 / NP-V230 / NP-V260R NORMAL, POWER-SAVING NP-VE281X / NP-VE280X / NP-VE281 / NP-VE280 NORMAL, POWER-SAVING ※ The following models use a different menu item name. ・NP-PX2000UL: STANDBY POWER ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 99 305-1. BASE MODEL TYPE REQUEST 305-2. SERIAL NUMBER REQUEST ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST － － － － － － － 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 100 305-2. SERIAL NUMBER REQUEST ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST ○ － ○ ○(Ver. 2.00 or later) ○ － － 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 101 ○ ○ ○ 305-2. SERIAL NUMBER REQUEST ○ － ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST － － ○ ○ ○ ○ － 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 102 ○ ○ ○ 305-2. SERIAL NUMBER REQUEST ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST － － － － － － － 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 103 ○ ○ 305-2. SERIAL NUMBER REQUEST ○ ○ ○ ○ ○ － ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST － － － － － － ○ 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 104 ○ ○ 305-2. SERIAL NUMBER REQUEST ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 305-3. BASIC INFORMATION REQUEST － － － － － ○ － 319-10. AUDIO SELECT SET ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 105: Supplementary Information By Command

    － － － － NP-V230X / NP-V260 / NP-V230 － － － － NP-V260R － － － － NP-VE303X / NP-VE303 － － － － NP-VE281X / NP-VE281 － － － － NP-VE280X / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 106 NP-V230X / NP-V260 / NP-V230 － － － － NP-V260R － － － － － NP-VE303X / NP-VE303 － － － － － NP-VE281X / NP-VE281 － － － － － － NP-VE280X / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 107 NP-V230X / NP-V260 / NP-V230 － － － － － － NP-V260R － － － － － － NP-VE303X / NP-VE303 － － － － － － NP-VE281X / NP-VE281 － － － － － － NP-VE280X / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 108 NP-V230X / NP-V260 / NP-V230 － － － － － － NP-V260R － － － － － － NP-VE303X / NP-VE303 － － － － － － NP-VE281X / NP-VE281 － － － － － － NP-VE280X / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 109 NP-V230X / NP-V260 / NP-V230 － － － － － NP-V260R － － － － － NP-VE303X / NP-VE303 － － － － － NP-VE281X / NP-VE281 － － － － － NP-VE280X / NP-VE280 ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 110: [018. Input Sw Change] Aspect

    16:9 NATIVE 15:9 16:10 NP-UM301W / NP-UM351W / NP-UM352W (XGA Model) － NP-V332X / NP-V332W / NP-V302X / NP-V302W / NP-V302H AUTO 16:9 NATIVE 15:9 16:10 － NP-VE303X / NP-VE303 AUTO 16:9 NATIVE 15:9 16:10 ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 111 NP-UM301W / NP-UM351W / NP-UM352W (WXGA Model) － － － － － － － － － NP-V332X / NP-V332W / NP-V302X / NP-V302W / NP-V302H － － － － － － － － － NP-VE303X / NP-VE303 ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 112: Eco Mode

    NP-VE303X / NP-VE303 － － － － NP-VE281X / NP-VE280X / NP-VE281 / NP-VE280 * The following models use a different menu item name. ・NP4100 / NP4100W : Lamp Mode ・NP-PX620X / NP-PX550W : Lamp Mode ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 113: Base Model Type

    NP-M260X NP-M260XS NP-M271W NP-M271X NP-M282X NP-M283X NP-M300W NP-M300WS NP-M300X NP-M300XS NP-M302WS NP-M303HS NP-M303WS NP-M311W NP-M311X NP-M322H NP-M322W NP-M322X NP-M323H NP-M323HS NP-M323W NP-M323X NP-M332XS NP-M333XS NP-M350X NP-M350XS NP-M352WS NP-M353HS NP-M353WS NP-M361X NP-M362W NP-M362X NP-M363W NP-M363X NP-M402H ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 114 NP-M420X NP-M420XV NP-ME270X NP-ME301W NP-ME301X NP-ME310X NP-ME331W NP-ME331X NP-ME360X NP-ME361W NP-ME361X NP-P350W NP-P350X NP-P401W NP-P420X NP-P451W NP-P451X NP-P452H NP-P452W NP-P474U NP-P474W NP-P501X NP-P502H NP-P502HL NP-P502W NP-P502WL NP-P523X NP-P525UL NP-P525WL NP-P554U NP-P554W NP-P603X NP-P604X NP-P605UL NP-PA500U ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 115 NP-PA622X NP-PA653U NP-PA653UL NP-PA671W NP-PA672W NP-PA703W NP-PA721X NP-PA722X NP-PA723U NP-PA803U NP-PA803UL NP-PA804UL NP-PA853W NP-PA903X NP-PA1004UL NP-PE401H NP-PE501X NP-PE523X NP-PH1000U NP-PH1002HL NP-PH1202HL NP-PH1400U NP-PH2601QL NP-PH3501QL NP-PX550W NP-PX581W NP-PX602UL NP-PX602WL NP-PX620X NP-PX651X NP-PX700W NP-PX750U NP-PX800X NP-PX803UL NP-PX1004UL ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 116 NP-U260W NP-U300X NP-U310W NP-U321H NP-UM280W NP-UM280X NP-UM301W NP-UM301X NP-UM330W NP-UM330X NP-UM351W NP-UM352W NP-UM361X NP-V230 NP-V230X NP-V260 NP-V260R NP-V260W NP-V260X NP-V281W NP-V300W NP-V300X NP-V302H NP-V302W NP-V302X NP-V311W NP-V311X NP-V332W NP-V332X NP-VE280 NP-VE280X NP-VE281 NP-VE281X NP-VE303 NP-VE303X ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 117: Selection Signal Type

    NP-U300X / NP-U250X / If there is no signal, FFh is returned. NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV FFh is returned. DATA09 Freeze status NP4100 / NP4100W / Not supported (00h is always returned). NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 118 Supplement for "305-3. BASIC INFORMATION REQUEST" Parameter Model name DATA04 Selection signal type 2 NP-U300X / NP-U250X / NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV DATA09 Freeze status NP4100 / NP4100W / NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 119 Supplement for "305-3. BASIC INFORMATION REQUEST" Parameter Model name DATA04 Selection signal type 2 NP-U300X / NP-U250X / NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV DATA09 Freeze status NP4100 / NP4100W / NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 120 Supplement for "305-3. BASIC INFORMATION REQUEST" Parameter Model name DATA04 Selection signal type 2 NP-U300X / NP-U250X / NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV DATA09 Freeze status NP4100 / NP4100W / NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 121 Supplement for "305-3. BASIC INFORMATION REQUEST" Parameter Model name DATA04 Selection signal type 2 NP-U300X / NP-U250X / NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV DATA09 Freeze status NP4100 / NP4100W / NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 122 Supplement for "305-3. BASIC INFORMATION REQUEST" Parameter Model name DATA04 Selection signal type 2 NP-U300X / NP-U250X / NP-U310W / NP-U260W DATA07 Sound mute NP-M420XV DATA09 Freeze status NP4100 / NP4100W / NP-PX620X / NP-PX550W ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 123: Sub Input

    NP-PH1202HL / NP-PH1002HL BNC(CV) BNC(Y/C) HDMI SLOT DisplayPort COMPUTER ― ― ― ― ― NP-PX1005QL HDMI1 HDMI2 DisplayPort1 NP-PX1004UL BNC(CV) BNC(Y/C) HDMI SLOT DisplayPort COMPUTER NP-PX803UL NP-PX602UL / NP-PX602WL BNC(CV) BNC(Y/C) HDMI SLOT DisplayPort COMPUTER ©NEC Display Solutions, Ltd. 2014-2020...
  • Page 124 ― NP-PH1202HL / NP-PH1002HL HDBaseT ― NP-PX1005QL HDBaseT※ DisplayPort2 SDI1 SDI2 SDI3 SDI4 SLOT※ NP-PX1004UL ― ― ― ― ― ― ― HDBaseT NP-PX803UL ― ― ― ― ― ― ― NP-PX602UL / NP-PX602WL HDBaseT ©NEC Display Solutions, Ltd. 2014-2020...

  • Page 125: Audio Select

    Model name NP-PA1004UL / NP-PA804UL / ― NP-PA622U / NP-PA522U / NP-PA672W / NP-PA572W / HDMI1 HDMI2 DisplayPort HDBaseT USB-A USB-B NP-PA722X / NP-PA622X ETHRENET Othere than the above models HDMI1 HDMI2 DisplayPort USB-A USB-B HDBaseT ©NEC Display Solutions, Ltd. 2014-2020...

This manual is also suitable for:

Px2000ul-47zlPa804ul-wgPa1004ul-wgPx2000ul

Table of Contents