Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
‰
fire and/or serious injury.
WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this
‰
tool.
Save all warnings and instructions for future reference.
9
1.2.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9
DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools
8
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
9
1.3.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
9
tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes,
9
hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking
9
up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
9
Remove any adjusting key or wrench before turning the power tool on.
9
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
8
situations.
Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes,
9
jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
9
1.4.
POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer
8
at the rate for which it was designed.
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is
8
dangerous and must be repaired.
WARNING! Remove the battery pack from the power tool before making any adjustments, changing accessories, or
‰
storing power tools.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
9
operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect
9
the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
9
and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous
situation.
1.5.
SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of
9
the power tool is maintained. Unauthorised parts may be dangerous and will invalidate the warranty.
1.6.
SPECIFIC PRESSURE WASHER SAFETY
WARNING! Disconnect the battery before changing accessories, servicing or performing any maintenance.
9
WARNING! Keep all connections tight and in good working order.
‰
Check regularly for damaged parts. Any part that is damaged must be repaired/replaced before the washer is next used.
9
Use where air can freely circulate around the washer to avoid the machine over-heating.
9
© Jack Sealey Limited
20V CORDLESS PRESSURE WASHER - BODY
ONLY
MODEL NO:
Wear protective
Wear protective
gloves
clothing
Original Language Version
CP20VPW
Wear ear
Machine not
protection
suitable for
connection to
the potable
water mains
DO NOT direct jet against
yourself, other persons,
animals, electrical equipment
or the machine itself
CP20VPW Issue 1 08/12/21
Advertisement
Related Manuals for Sealey CP20VPW
Summary of Contents for Sealey CP20VPW
- Page 1 CP20VPW MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 DO NOT allow untrained persons to operate the washer. When not in use, remove the battery and store in a safe, dry, childproof area. 2. INTRODUCTION Lightweight and portable cordless pressure washer. Ideal for cleaning muddy bikes and sports equipment, as well as gutters, conservatory roofs and other hard to reach places. Six function nozzles, selected by turning spray head. 120L/hr flow rate and a working pressure of 22bar. 6m water intake hose with float and filter can draw water from any remote source. Supplied with soap pot. Requires compatible 20V battery and mains charger, sold separately. 3. SPECIFICATION MODEL NO: ............CP20VPW Hose Length:..............6m Maximum Pressure: ......... 22bar(320psi) Maximum Water Flow:..........120L/hr Motor Power:..............130W Supply: ................20V CONSUMABLES: Mains Charger (not included): CP20VMC Battery (not included): ..
- Page 3 Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk...