Advertisement
Quick Links
Cisco Security Device Manager (SDM) Quick
Start Guide
This document accompanies the Quick Start Guide for your Cisco router. It describes Security Device
Manager (SDM) and shows you how to use it to configure your Cisco IOS.
Cisco Security Device Manager (SDM) is an easy-to-use device management tool that allows you to
configure Cisco IOS security features through an intuitive web-based graphical user interface.
This document contains the latest information on how to use SDM to give your router an initial
Note
configuration. If the Quick Start Guide that came with your router contains SDM startup instructions, do
not use those instructions. Use this document instead.
If you don't want to use SDM to configure the router, see
Translated Versions of this Document
Translated versions of this document are available in the following languages: German, Dutch, French,
Spanish, Italian.
•
•
•
•
•
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Die Deutsche Version dieses Dokuments finden Sie unter http://www.cisco.com/go/sdm.
Voor de Nederlandse versie van dit document ga naar de volgende website:
http://www.cisco.com/go/sdm.
Une version Francaise de ce document est disponible a partir du lien suivant:
http://www.cisco.com/go/sdm
Este documento está disponible en español a través de
Una versione italiana di questo documento è disponibile a
I Want to Use the Cisco IOS Startup
http://www.cisco.com/go/sdm
http://www.cisco.com/go/sdm
Sequence.
Advertisement
Related Manuals for Cisco 1701
Summary of Contents for Cisco 1701
- Page 1 Una versione italiana di questo documento è disponibile a • Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Copyright © 2003 Cisco Systems, Inc. All rights reserved. I Want to Use the Cisco IOS Startup Sequence.
- Page 2 Table 1 Router Port Numbers Cisco Router Model 831, 836, and 837 1701 Cisco Security Device Manager (SDM) Quick Start Guide 10.10.10.0 subnet to determine which port to connect the PC to, and what type of cable to use. The Table 1 turns on when the connection is made.
- Page 3 Table 1 Router Port Numbers Cisco Router Model 1711, 1712 1710, 1721, 1751, 1760 2600 3600 3700 Task 3: Start SDM, and Complete the Startup Wizard To start SDM and begin the router configuration, follow these steps: Open a web browser on the PC, and enter the following URL: Step 1 https://10.10.10.1 The https://...
- Page 4 Use SDM to Configure the Router Figure 2 Router Home Page If the router home page does not appear when you enter the URL https://10.10.10.1 (or http://10.10.10.1), test the connection between the PC and the router by doing the following: •...
- Page 5 Figure 3 SDM Launch Page A window appears that provides information about the browser and its settings. That window also Step 6 informs you that SDM will open in another window. You can close this window and wait for the SDM Startup Wizard page to appear.
- Page 6 Use SDM to Configure the Router Assign a new IP address to the PC’s Ethernet interface; place it on the same subnet as the router’s Step 1 Ethernet port, which you assigned in configured a DHCP server on the router, configure the PC to obtain an IP address automatically. Figure 4 Configure the PC with an IP Address on the New Subnet Crossover cable...
- Page 7 Figure 5 SDM Overview Window Using SDM Cisco SDM provides a series of easy-to-use wizards that quickly take you step-by-step through configuring your router, without requiring knowledge of the Cisco IOS software CLI. You can use SDM wizards to: Configure WAN connections •...
- Page 8 You’re Done! Where to Go from Here Click Address Pool to define a pool of dynamic NAT IP addresses. – Click Add... to create NAT rules. – To customize the router’s firewall policy or create an ACL, click Firewall Policy. •...
- Page 9 Use a terminal emulation program on your PC, with the terminal emulation settings of 9600 baud, 8 data Step 3 bits, no parity, 1 stop bit, and no flow control, to connect to your router. At the prompt, enter the enable command. The default configuration file does not configure an enable Step 4 password.
- Page 10 CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST,...