Advertisement
Quick Links
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
1.1.
ELECTRICAL SAFETY
p WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following:
You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets
and any other connector for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of
appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board.
We also recommend that a Residual Current Device (RCD) is used. It is particularly important to use an RCD with portable
products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You
may obtain a Residual Current Device by contacting your Sealey dealer.
You must also read and understand the following instructions concerning electrical safety.
1.1.1.
The Electricity at Work Act 1989 requires all portable electrical appliances, if used on business premises, to be
tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.
1.1.2.
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the
safe condition of those appliances and the safety of the appliance operators. If in any doubt about electrical safety,
contact a qualified electrician.
1.1.3.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. See
1.1.1. and 1.1.2. and use a Portable Appliance Tester.
1.1.4.
Ensure that cables are always protected against short circuit and overload.
1.1.5.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that none
is loose.
Important: Ensure that the voltage marked on the appliance matches the
1.1.6.
power supply to be used and that the plug is fitted with the correct fuse.
See your heater manual for the correct fuse.
1.1.7.
DO NOT pull or carry the appliance by the power cable.
DO NOT pull the plug from the socket by the cable.
1.1.8.
1.1.9.
DO NOT use worn or damaged cables, plugs or connector.
Immediately have any faulty item repaired or replaced by a qualified electrician.
1.2.
GENERAL SAFETY
3 Check that the heater is in sound condition and good working order. Take immediate
action to repair or replace damaged parts.
3 Use recommended parts only. Unapproved parts may be dangerous and will invalidate
the warranty.
WARNING! Only use heater in well ventilated areas. Ensure continuous ventilation is provided to the heater operating area. If
p
your operating area has no direct access to clean fresh air we recommend that you run a large gauge duct from the outside of the
building to the back of the heater in order to provide a clean air intake.
3 Keep the heater a minimum of 3 meters from any combustible materials (i.e. wooden items, cloth, plastics, paper, etc).
3 Maintain a minimum distance of 50cm from non-combustible materials (i.e. brick, steel, concrete, etc).
3 Maintain the following clearances around the heater. Sides - 0.6m, Top - 1.5m, Air inlet - 0.6m, Air outlet - 3.0m
For all other heater safety see your heater instructions.
2.
INTRODUCTION
Thermostat with a setting range of 5°-30° and On/Off switch gives complete control over remotely positioned heater. Supplied with 10mtr cable
and plug for direct connection to heater. Suitable for use with AB502, AB902, AB1452, AB125HE and AB180HE heaters.
Instructions For: REMOTE THERMOSTAT FOR
AB CHIMNEY HEATERS
ABT04
MODEL:
Yellow & Green
Earth Wire
Blue
Neutral
Wire
Cable
Restraint
ABT04 - 1 - 101104
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
1.1.
ELECTRICAL SAFETY
p WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following:
You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets
and any other connector for wear or damage. You must ensure that the risk of electric shock is minimised by the installation of
appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated in the main distribution board.
We also recommend that a Residual Current Device (RCD) is used. It is particularly important to use an RCD with portable
products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You
may obtain a Residual Current Device by contacting your Sealey dealer.
You must also read and understand the following instructions concerning electrical safety.
The Electricity at Work Act 1989 requires all portable electrical appliances, if used on business premises, to be
1.1.1.
tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the
1.1.2.
safe condition of those appliances and the safety of the appliance operators. If in any doubt about electrical safety,
contact a qualified electrician.
1.1.3.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply. See
1.1.1. and 1.1.2. and use a Portable Appliance Tester.
1.1.4.
Ensure that cables are always protected against short circuit and overload.
1.1.5.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that none
is loose.
1.1.6.
Important: Ensure that the voltage marked on the appliance matches the
power supply to be used and that the plug is fitted with the correct fuse.
See your heater manual for the correct fuse.
DO NOT pull or carry the appliance by the power cable.
Brown
1.1.7.
Live
1.1.8.
DO NOT pull the plug from the socket by the cable.
Wire
1.1.9.
DO NOT use worn or damaged cables, plugs or connector.
Immediately have any faulty item repaired or replaced by a qualified electrician.
1.2.
GENERAL SAFETY
3 Check that the heater is in sound condition and good working order. Take immediate
action to repair or replace damaged parts.
3 Use recommended parts only. Unapproved parts may be dangerous and will invalidate
the warranty.
WARNING! Only use heater in well ventilated areas. Ensure continuous ventilation is provided to the heater operating area. If
p
your operating area has no direct access to clean fresh air we recommend that you run a large gauge duct from the outside of the
building to the back of the heater in order to provide a clean air intake.
3 Keep the heater a minimum of 3 meters from any combustible materials (i.e. wooden items, cloth, plastics, paper, etc).
3 Maintain a minimum distance of 50cm from non-combustible materials (i.e. brick, steel, concrete, etc).
3 Maintain the following clearances around the heater. Sides - 0.6m, Top - 1.5m, Air inlet - 0.6m, Air outlet - 3.0m
For all other heater safety see your heater instructions.
2.
INTRODUCTION
Thermostat with a setting range of 5°-30° and On/Off switch gives complete control over remotely positioned heater. Supplied with 10mtr cable
and plug for direct connection to heater. Suitable for use with AB502, AB902, AB1452, AB125HE and AB180HE heaters.
Instructions For: REMOTE THERMOSTAT FOR
MODEL:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
AB CHIMNEY HEATERS
ABT04
Yellow & Green
Earth Wire
Brown
Live
Wire
Blue
Neutral
Wire
Cable
Restraint
ABT04 - 1 - 101104
Advertisement
Summary of Contents for Sealey ABT04
- Page 1 MODEL: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.
- Page 2 The construction file for this product is held by the Manufacturer The construction file for this product is held by the Manufacturer and may be inspected, by a national authority, upon request to Jack Sealey Ltd and may be inspected, by a national authority, upon request to Jack Sealey Ltd...