Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
‰
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
8
DO NOT use tools if damaged.
9
Maintain tools in a good, clean condition for best and safest performance.
9
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
9
Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair.
9
Keep children and unauthorised persons away from the work area.
9
When not in use, store in a secure, childproof location.
9
Keep working area clean and tidy, dry and free from unrelated materials
9
Ensure the working area has adequate lighting
2. INTRODUCTION
Fastens and seals into the engine filler with two manufacturer specific adaptors. Covering a large proportion of modern vehicles for BMW and
Mercedes-Benz. Hands-free operation with no mess or spills. See instructions on Sealey website for complete list of vehicle applications.
3. SPECIFICATION
Adaptors: ...... 1 x Twist Fitting - 51mm, 1 x Clip Type - 38mm
4. OPERATION
4.1.
ASSEMBLY
Apply adhesive (not supplied) around the fine threads on the transparent chamber (fig.1).
4.1.1.
Connect transparent chamber to the upper funnel part (fig.1) to form complete funnel.
4.1.2.
4.2.
IN USE
NOTE: Ensure engine is cool before using funnel.
4.2.1.
Remove original oil cap on engine.
Connect oil funnel or funnel with relevant adaptor to oil filler neck.
4.2.2.
4.2.3.
Make sure the funnel is securely connected to the engine before filling..
Disconnect oil funnel from oil filler neck after oil is refilled.
4.2.4.
Clean residual oil inside the funnel and store the funnel in dry and well-ventilated place.
4.2.5.
© Jack Sealey Limited
4PC ENGINE OIL FUNNEL SET - BMW AND
MERCEDES-BENZ
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
VS7106
Wear protective
clothing
Clip Type
Twist Type
Funnel
Chamber
Adaptor
fig.1
Location
VS7106
Issue 1
24/05/22
Advertisement
Related Manuals for Sealey VS7106
Summary of Contents for Sealey VS7106
- Page 1 VS7106 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Clips All engines 2015-2019 All engines 2019-2021 Twist All engines 2019-2021 Twist Clips All engines 2000-2002 2002-2008 Clips E85/E86 All engines Clips All engines 2009-2016 2018-2021 All engines Twist VS7106 Issue 1 24/05/22 Original Language Version © Jack Sealey Limited...
- Page 3 W251 All engine types 2006-2014 1998-2005 Clips Mercedes-Benz S-Class W220 All engine types 2005-2013 Clips Mercedes-Benz S-Class W221 All engine types 2013-2017 Clips Mercedes-Benz S-Class W222 All engine types VS7106 Issue 1 24/05/22 Original Language Version © Jack Sealey Limited...
- Page 4 All engine types 1995-2021 Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.