Table of Contents
Advertisement
11. SETUPS
11.1. Network connection
HOME A "Setup" A "
Perform the network connection setup in order to use network features, such as BD-Live™, Netflix, VUDU,
YouTube™ and the network update function.
C Connection test
After you enable a network connection or change network settings, always perform the connection test to
check to see if the connection is correctly made.
1. Use [
2. Use [
] to select "
3. Use [
] to select "Network", then press [OK].
4. Use [
] to select "Connection Test", then press [OK].
• Connection test will automatically start. The test result will appear right after the test finishes.
5. If the connection test passes, press [OK].
Note
D
• If the connection test passes, you are ready to use BD-Live™, Netflix, VUDU, YouTube™ and network update
function, using the Internet without making any additional settings.
• If the connection test fails, you may need to check your router settings and make sure the physical
connection is secure. If you need the MAC address of this unit to complete your router settings, you can
view it in system information.
• When connecting this unit directly to a modem for the first time or connecting it to a modem which was
previously connected to any other network device (e.g. a router, PC, etc.), you may have to power cycle the
modem (unplug the modem's and/or router's AC power cord from its AC outlet for 30 seconds and then plug
it back in), this may reset the settings in the modem. If you have a telephone/Internet modem with your cable
service then you may have to use its reset button or remove the backup battery to reset this type of modem.
• If the connection test fails, this unit is not connected to the Internet. In this case, you cannot use the BD-Live™
function or access network services, such as You Tube™, Netflix or VUDU. Please confirm router settings or
contact your ISP (Internet Service Provider) for troubleshooting assistance.
C Wired connection
Auto
In order to make a wired connection, connect an ethernet cable from a router with Internet access. A network
will automatically be established.
• In order to confirm that this unit is connected to the Internet, perform "Connection test" (refer to page 42).
• In order to switch from wireless connection to wired, perform the following steps.
1. Connect an ethernet cable from a router with Internet access.
2. Use [
3. Use [
] to select "
4. Use [
] to select "Network", then press [OK].
5. Use [
] to select "Interface", then press [OK].
6. Use [
] to select "Ethernet", then press [OK].
• When attempting to switch from "Wireless" to "Ethernet", a confirmation screen will appear. Use [
to select "Yes", then press [OK].
• Network setting will automatically be performed.
EN
" A "Network"
] to select "Setup" in the home menu, then press [OK].
", then press [OK].
] to select "Setup" in the home menu, then press [OK].
", then press [OK].
42
]
continued on next page
Advertisement
Table of Contents
