Table of Contents
Advertisement
Quick Links
User's Manual
IE-77016-CM-LC
Level Converter for In-Circuit Emulator
Target devices
µ µ µ µ PD77015
µ µ µ µ PD77017
µ µ µ µ PD77018
µ µ µ µ PD77018A
µ µ µ µ PD77019
µ µ µ µ PD77110
µ µ µ µ PD77111
µ µ µ µ PD77112
Document No. U14139EJ1V0UMJ1 (1st edition)
Date Published August 2000 N CP(K)
©
1999
Printed in Japan
Advertisement
Table of Contents
Related Manuals for NEC IE-77016-CM-LC
Summary of Contents for NEC IE-77016-CM-LC
- Page 1 User’s Manual IE-77016-CM-LC Level Converter for In-Circuit Emulator Target devices µ µ µ µ PD77015 µ µ µ µ PD77017 µ µ µ µ PD77018 µ µ µ µ PD77018A µ µ µ µ PD77019 µ µ µ µ PD77110 µ...
- Page 2 [MEMO] User’s Manual U14139EJ1V0UM00...
- Page 3 NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others.
- Page 4 Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: •...
- Page 5 How to Read This Manual It is assumed that the readers of this manual have general knowledge of logic circuits and microcontrollers. The IE-77016-CM-LC is used connected to the IE-77016-98/PC in- circuit emulator. This manual describes the basic setup procedure and how to connect the IE-77016-CM-LC to the IE-77016-98/PC.
- Page 6 Document Name Document Number IE-77016-98/PC User’s Manual Hardware EEU-1541 IE-77016-CM-LC User’s Manual This manual Caution The related documents listed above are subject to change without notice. Be sure to use the latest version of each document for designing. User’s Manual U14139EJ1V0UM00...
-
Page 7: Table Of Contents
DIPSW2: Forced TRST signal output enable/disable selection ..........IE-77016-98/PC Settings ......................3.2.1 Connecting the IE-77016-CM-LC and IE-77016-98/PC ............. Connecting the Target System and IE-77016-CM-LC ............In the case of the µ PD77016 Family (except µ PD77016) ............3.3.1 In the case of the µ PD77111 Family .................. - Page 8 LIST OF FIGURES Figure No. Title Page 1-1. System Configuration ..........................2-1. External View of IE-77016-CM-LC......................2-2. External View of Flat Cable ........................3-1. Connecting Target System and IE-77016-CM-LC .................. User’s Manual U14139EJ1V0UM00...
-
Page 9: Chapter 1 General
CHAPTER 1 GENERAL The IE-77016-CM-LC is a JTAG signal level converter that converts +5 V JTAG interface signals input/output from an IE-77016-98/PC, which is an in-circuit emulator for the µ PD77016 Family and the µ PD77111 Family, to +3 V or Note +2.5 V JTAG interface signals. -
Page 10: Checking Packing Box
CHAPTER 1 GENERAL 1.1 Checking Packing Box The IE-77016-CM-LC packing box contains an IE-77016-CM-LC main unit, a guarantee card, a packing list, and a bag (accessory bag) containing the accessories. The accessory bag contains this manual and the cables. Please verify the contents of this bag. If there are missing or damaged items, contact an NEC sales representative or an NEC distributor. -
Page 11: Chapter 2 Part Names And Functions Of Components
CHAPTER 2 PART NAMES AND FUNCTIONS OF COMPONENTS The part names of the IE-77016-CM-LC and their function are described below. 2.1 Part Names of IE-77016-CM-LC Component Figure 2-1. External View of IE-77016-CM-LC Flat cable Cable for IE connection Interface level converter... -
Page 12: Functions Of Ie-77016-Cm-Lc Component
Lights when the JTAG signal is output from the target system. TARGET (J1) Connector used for connection to target device. Use the flat cable supplied with the IE-77016-CM-LC together with the device to be debugged. HOST (J2) Connector used for connection to IE-77016-98/PC. -
Page 13: Chapter 3 Installation
3.2.1 Connecting the IE-77016-CM-LC and IE-77016-98/PC Connect the J2 connector of the IE-77016-CM-LC and the CN3 connector of the IE-77016-98/PC to the IE connection cable supplied with the IE-77016-CM-LC. Do not use the JTAG cable supplied with the IE-77016-98/PC. -
Page 14: Connecting The Target System And Ie-77016-Cm-Lc
Connect the IE-77016-CM-LC to the target system using the 10-pin flat cable supplied with the IE-77016-CM-LC. First connect the 14-pin connector of the flat cable to the J1 connector of the IE-77016-CM-LC. Then connect the 10-pin connector to the pin provided on the target system side (Refer to APPENDIX TARGET SYSTEM PINS). -
Page 15: Switching Power On
Note This switch does not control the power of the IE-77016-CM-LC. Caution If removing or replacing devices on the target system, be sure to set SW1 of the IE-77016-CM-LC to OFF when you switch OFF the power of the target system. - Page 16 [MEMO] User’s Manual U14139EJ1V0UM00...
-
Page 17: Appendix Target System Pins
APPENDIX TARGET SYSTEM PINS Provide a dedicated debug pin on the target system. [In the case of the µ µ µ µ PD77016 Family (except µ µ µ µ PD77016)] • When using the 10-pin flat cable µ PD77015, 2.54 mm µ... - Page 18 APPENDIX TARGET SYSTEM PINS [In the case of the µ µ µ µ PD77111 Family] • When using the 12-pin flat cable 2.54 mm µ PD77110, µ PD77111, µ PD77112, TRST 2.54 mm × 5 16 mm TICE 6 mm = Pin ( 0.635, I = 6 mm) = Key Removed (to prevent incorrect insertion, to not provide pin.)
- Page 19 Facsimile Message Although NEC has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that From: errors may occur. Despite all the care and precautions we've taken, you may Name encounter problems in the documentation.