Removing The Processor Module; Replacing The Processor Module - Dell Inspiron N4010 Service Manual
Hide thumbs
Also See for Inspiron N4010:
- User manual (354 pages) ,
- Setup manual (94 pages) ,
- Service manual (54 pages)
Table of Contents
Advertisement
Back to Contents Page
Processor Module
Dell™ Inspiron™ N4010 Service Manual
Removing the Processor Module
Replacing the Processor Module
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
to apply slight pressure to the center of the processor while turning the cam screw.
CAUTION:
CAUTION:
computer.
Removing the Processor Module
1. Follow the instructions in
2. Remove the thermal cooling assembly (see
3. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
1
ZIF socket
CAUTION:
oils in your skin can reduce the heat transfer capability of the thermal pads.
CAUTION:
4. Lift the processor module from the ZIF socket.
Replacing the Processor Module
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press
To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the Thermal Cooling
2
ZIF-socket cam screw
To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor thermal-cooling assembly. The
When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module.
UserManuals.info
Removing the
Battery) before working inside the
Assembly).
Advertisement
Table of Contents
