Motorola Sonic Rider SP005 - Bluetooth Car Speakerphone Manual

At a glance

1. Mute
2. Volume (-)
3. Volume (+)
4. MFB
5. Micro USB Charging Port
6. Status Light
7. Power Switch

Specifications

Charge

Plug the charging cable into the micro USB port. Red LED lights during charging, and blue LED lights when fully charged.

Note: You can use your speakerphone unplugged or while plugged into the charger.

Your battery is designed to last the life of your device. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage the device, void your warranty, and could cause injury.
The device can be powered through a micro USB from any CE compliant power source that implement the European interface as requested by EN 301 489-52

Pairing

1. Turn on Bluetooth on you device.
   
2. Turn on the speakerphone. Speakerphone will enter pairing mode automatically with LED flashes blue and red. You will see Green when it is on and Red when off
   
3. Go to the Bluetooth menu on you device, Select "Sonic Rider" from the list
   
4. When the device and speakerphone connect, you'll hear "connected".
   

Auto Reconnect

After first-time pairing to a device, speakerphone will auto reconnect to the device when powered on and within Bluetooth range of the device.

Installation

Slide onto car visor

Before installing or using your product, check the local laws regarding mounting and use of equipment.

For safe installation:

• Do not put your product in a location that obstructs the driver's vision or interferes with the operation of the vehicle.
• Do not cover an airbag.

Buttons Operation

LED Status Light

Videos

Unboxing Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Motorola Sonic Rider SP005 - Bluetooth Car Speakerphone Manual