Table of Contents
Advertisement
Steps
1. Place the base cover on top of the palm-rest and keyboard assembly.
2. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and snap the base
cover latches into place.
3. Tighten the two captive screws and replace the six screws (M2x5) to secure the base cover to the palm-rest and keyboard
assembly.
Next steps
1. Follow the procedure in
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, carefully pry the memory-module retention clips, that secure the memory module to the slot, until the
memory module pops-up.
2. Slide the memory module at an angle and remove it from the memory-module slot on the system board.
36
Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.
Hide quick links:
Advertisement
Table of Contents
