Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instruction
Wear safety
manual
footwear
1.
SAFETY
Ensure the jack is in sound condition and good working order. Take action for immediate repair or
replacement of damaged parts. Use genuine parts only. The use of unapproved parts may be
dangerous and will invalidate the warranty.
Locate the jack in a suitable, well lit working area.
Keep working area clean and tidy and free from unrelated materials.
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
Place wedges under wheels of a vehicle, but ensure wheels of jack can move freely.
Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear
(or "PARK" if an automatic).
Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc.,
to allow for vehicle tilting.
Ensure there are no passengers in the vehicle.
Ensure all non-essential persons keep a safe distance whilst the jack is in use.
Only place jack under those lifting points recommended by vehicle manufacturer (see vehicle handbook).
Check the lifting point is stable and centred on the jack saddle.
Ensure the jack wheels are free to move and that there are no obstructions.
Use suitable capacity axle stands under the vehicle before proceeding with any task.
Ensure there are no persons or obstructions beneath the vehicle before lowering.
Use a qualified person to maintain or repair the jack's hydraulic system.
DANGER: Use the jack for lifting only.
DO NOT use for supporting the lifted load.
DO NOT operate the jack if damaged.
DO NOT allow untrained persons to operate the jack.
DO NOT exceed the rated capacity of the jack.
DO NOT allow the vehicle or the jack to move while supported by the jack.
DO NOT jack the vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
DO NOT work under the vehicle until the axle stands have been correctly positioned.
DO NOT use the jack for purposes other than that for which it is intended.
DO NOT top up the hydraulic system with brake fluid. Use hydraulic jack oil only.
DO NOT adjust the safety overload valve.
When not in use store the jack, fully lowered, handle removed in a safe, dry, childproof area.
2.
INTRODUCTION
i
Single-piece hydraulic unit with heavy base design and large jacking saddle. Twin piston Super Rocket Lift feature brings lifting arm straight into
contact with the jacking point in 1-2 strokes. Universal joint release mechanism allows safer, more controlled lowering of the jack. Fitted with safety
overload valve and pump-through valve to prevent handle locking at maximum ram extension. Supplied in Hi-Visibility green for easy location and
visual safety.
3.
SPECIFICATION
Model No: ............................................................ 3015CXDHV
Capacity: ........................................................................3tonne
Minimum Saddle Height: ...............................................132mm
Maximum Saddle Height: ..............................................472mm
Maximum Chassis Height: .............................................158mm
Length: ..........................................................................620mm
Weight: ..............................................................................31kg
© Jack Sealey Limited
TROLLEY JACK 3TONNE SUPER ROCKET LIFT
HI-VIS
3015CXDHV
MODEL NO:
Original Language Version
Apply
Chock
Wheels
Never
exceed
X2
3015CXDHV
Issue:1 - 10/04/18
Advertisement
Related Manuals for Sealey HI-VIS
Summary of Contents for Sealey HI-VIS
- Page 1 3015CXDHV MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Check the piston and piston rod periodically for signs of rust/corrosion. 7.5. Should you suspect the jack to be damaged or in any way unsafe, remove from service immediately and contact your authorised Sealey stockist for advice and repairs. At the end of the jack’s serviceable life, drain the oil from it and dispose of according to local authority guidelines.
- Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...