Page 1
INSTRUCTIONS FOR: ARC WELDERS 140XT MOdelS N 160XT Original Language Version 140XT, 160XT Issue: 2 - 10/02/10...
Page 2
(RCd) is used. It is particularly important to use an RCd with portable products that are plugged into a supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current device by contacting your Sealey dealer.
SPECIFICATIONS Model No: .............140XT Model No: .............160XT Welding Current:..........45-140A Welding Current: ..........55-160A electrode Capacity: ........
Page 4
WARNING! Use pliers to remove the hot consumed electrodes or to move the hot welded pieces. 6.5.9. When welding has finished remove the electrode from the electrode holder as a safety precaution. Original Language Version 140XT, 160XT Issue: 2 - 10/02/10...
Screening and shielding. Selective screening and shielding of other cables and equipment in the surrounding area may alleviate problems of interference. Screening of the entire welding/cutting installation may be considered for special applications. Original Language Version 140XT, 160XT Issue: 2 - 10/02/10...
Noise from within case when welding Uneven gap between the moving iron core Return to Sealey dealer to have cores and static iron core adjusted NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.