Advertisement
Quick Links
TS DIAGRAM
AB933
Issue No: 1 - 02/04/08
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are
adhered to when using tools.
WARNING! Air brushes produce a fine mist of paint and solvents which may be harmful by inhalation.
Always wear suitable protective breathing equipment which can be obtained from your local Sealey
Dealer. For a better understanding of the risks involved with any particular paint or solvent read the
warnings on the containers and follow the advice given.
Also take measures to protect the eyes and skin from contact with paint and solvents. A full range of
personal safety equipment is available from your Sealey Dealer.
DO NOT operate the air brush near other people unless they are wearing the same protective equipment.
DO NOT eat or drink when using the air brush.
DO NOT allow smoking or open flame in the work area.
Ensure that the air brush and accessories are in a clean, sound condition and good working order. Take
action for immediate repair or replacement of damaged parts. Use recommended parts only.
The use of unauthorised parts may be dangerous and will invalidate the warranty.
Ensure the air brush supply hose is not tangled, twisted or pinched.
DO NOT use air brush or accessories if damaged.
DO NOT operate air brush while under the influence of drugs, alcohol or intoxicating medication, or if
fatigued.
DO NOT direct spray against yourself, other persons or animals or electrical equipment.
DO NOT use the air brush for a task it is not designed to perform.
Always ensure adequate ventilation in the work area.
Always disconnect from the air supply before dismantling the air brush for cleaning and maintenance.
DO NOT leave the air brush connected to the air supply when unattended.
2. INTRODUCTION
Metal body construction with built-in gravity feed pot and
0.25mm nozzle. Features a double-action trigger providing
precision control over paint flow, which allows for
a professional finish. Supplied in storage case.
3. ASSEMBLY
3.1. Attach a suitable air hose onto the air hose connection underneath the air brush trigger and the other end
onto the air supply.
NOTE: The maximum air supply to the air brush should never exceed 45psi. Normal operating pressure is
approx 30psi.
I N S T R U C T I O N S F O R :
PROFESSIONAL GRAVITY
FEED AIR BRUSH KIT
AB933
MODEL:
AB933
Issue No: 1 - 02/04/08
Advertisement
Related Manuals for Sealey AB933
Summary of Contents for Sealey AB933
- Page 1 Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
- Page 2 5.1.2. Spray the solvent into a suitable container, this will clean the needle and nozzle assembly. Hold a soft 01284 757500 www.sealey.co.uk Sole UK Distributor Sealey Group, cloth over the needle cap and spray again, this will force air and the compatible solvent back through the 01284 703534 Bury St. Edmunds, Suffolk.