About this manual ® This manual contains service and reference information for the following ThinkPad products. ThinkPad E14 Gen 4 Machine types (MT) 21E3, 21E4, 21EB, and 21EC ThinkPad E15 Gen 4 Machine types (MT) 21E6, 21E7, 21ED, and 21EE...
Page 6
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
0.1 ohm or less between the external ground pin and the frame ground. b. The power cord should be the authorized type specified for your computer. Go to: https:// www.lenovo.com/serviceparts-lookup c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries.
The safety notices in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese DANGER DANGER DANGER E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
UEFI BIOS downloads. Telephone numbers for Lenovo Support are available at: https://pcsupport.lenovo.com/supportphonelist • System Disassembly/Reassembly videos that show the FRU removals or replacements for the Lenovo authorized service technicians are available in the following support site: https://www.lenovoservicetraining.com/ion/...
Dynamic Configure To Order (CTO) This model provides the ability for a customer to configure a Lenovo solution from a web site, and have this configuration sent to fulfillment, where it is built and shipped directly to the customer. The machine label and eSupport will load these products as the 4-character MT, 4-character model and 2-character country code.
Page 29
2. Type the Machine Type in the corresponding field to get a general FRU list. Or type the Serial Number for more detailed FRU information. Chapter 2 Important service information...
Page 30
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Note: If you are unable to isolate and repair the problem yourself after running the program, save and print the log files created by the program. You need the log files when you speak to a Lenovo technical support representative.
Note: The recover bad sectors tool is only available on computers that have hard disk drives installed. Bootable diagnostic programs If the computer you are servicing is not installed with the UEFI diagnostic program, you can download a bootable diagnostic program from the Lenovo Support Web site. The bootable diagnostic programs enable Chapter 3 General checkout...
Checking the USB-C type ac power adapter To check the USB-C type ac power adapter, do the following: 1. Connect the computer to a power outlet and turn on the computer. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
2. Start Lenovo Vantage program, and then click Hardware Settings ➙ Power. The ac power adapter information is displayed. Ensure that you use the USB-C type ac power adapter that is shipped with the computer to provide enough power to the computer. Otherwise, a message will be displayed, prompting you that the computer will not be charged or will be charged slowly.
Page 36
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Reset or restore Windows To reset or restore Windows, refer to the information below: • Use Lenovo recovery options. 1. Go to https://support.lenovo.com/HowToCreateLenovoRecovery 2. Follow the on-screen instructions. • Use Window recovery options.
The system management password can also protect the system information stored in UEFI BIOS like a supervisor password, but it has lower authority by default. The system management password can be set through the UEFI BIOS menu or through Windows Management Instrumentation (WMI) with the Lenovo client-management interface.
Lenovo cannot reset your passwords or recover data from the storage drive. You can contact a Lenovo authorized service provider to have the storage drive replaced. A fee will be charged for parts and service. If the storage drive is a CRU (Customer Replaceable Unit), you can also contact Lenovo to purchase a new storage drive to replace the old one by yourself.
• Press any key. • Open the LCD cover. • Turn on the power button. Also, in either of the following events, the computer automatically returns from sleep mode and resumes operation: E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
• The ring indicator (RI) is signaled by a serial device or a PC Card device. • The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters sleep mode. Wait a few seconds before taking any action to reenter operation mode.
ThinkVantage Active Protection sensor diagnostics failed. 2100 1. Reseat the M.2 solid-state drive. Detection error on M.2 main Slot (SSD0) 2. Replace the M.2 solid-state drive. 3. Replace the system board. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Beep errors Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep technology, do the following: 1.
Page 44
The following section describes some beep errors and the corresponding solutions. Note: Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center or product documentation. Only use a Lenovo-authorized service provider to repair your product. Error codes...
LCD technology, but excessive pixel problems can cause viewing concerns.If the LCD you are servicing has two or less visible defective pixels, it should not be considered faulty. However, if the LCD has three or more visible defective pixels, it will be deemed as defective by Lenovo and it should be replaced. Notes: •...
6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. 7. If the problem remains, replace the following FRUs one at a time (do not replace a nondefective FRU): a. System board b. LCD assembly E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 48
Break operation Pause operation Scroll contents Send system request Enter sleep mode To wake up the computer, press Fn or the power button. Go to beginning Go to end E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
AMD models USB-C power connector Always on USB 3.2 connector Gen 1 HDMI connector Audio connector Ethernet connector (for selected Security-lock slot models) ThinkPad Integrated Earbuds (for USB 2.0 connector selected models of E15 Gen 4) *for selected models Locating FRUs and CRUs This topic introduces the following service parts: •...
CRUs, you can either install the CRU yourself or you can request that a Service Provider install the CRU according to the warranty service for your product. If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request.
Page 56
Memory module* System board Memory module bracket M.2 solid-state drive (2280) Trackpad cable Trackpad Lenovo factory recovery USB key* Miscellaneous parts kits Power cord ac power adapter * for selected models E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 58
Lenovo factory recovery USB key* Miscellaneous parts kits Power cord ac power adapter * for selected models Notes: • Depending on the computer model, your computer might look different from the illustration above. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
• The Lenovo factory recovery USB key is used to restore the Microsoft Windows operating system. It might not come with the computer, and a user might order it from https://pcsupport.lenovo.com/ , though additional shipping and handling fees might apply.
Connector and cable guide This topic provides information to help Lenovo authorized service technicians identify connectors and cables for replacement purpose. To view each FRU and the exploded illustration of the computer, see “Major FRUs” on page 48 and “LCD FRUs” on page 53.
Page 62
Connect one end of the cable to this connector. TrackPoint conenctor TrackPoint cable The keyboard assembly comes with the TrackPoint (internal) cable. Connect one end of the cable to this connector. I/O board connectors E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 63
Table 11. I/O board Item Connector (location) Internal cable required Cable connection Ethernet connector Connect an Ethernet cable to this connector. (external) Connect a USB-C compatible device to this USB 2.0 connector (external) connector. Chapter 6 Locations...
Looking up FRU information Looking up FRU information For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to: https://support.lenovo.com/partslookup E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at .
These numbers need to remain the same throughout the life of the computer. If you replace the system board, you must restore the serial number of the system unit to its original value. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Maintenance key. Note: Only an authorized Lenovo service technician can access the above Web site. 3. Restart the computer. 4. When the logo is displayed, press Esc. The ThinkPad Config Information Update Utility interface is displayed.
Page 68
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual is available for downloading at https:// support.lenovo.com...
4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. 1010 Base cover assembly E14 Gen 4 E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 71
Applying labels to the bottom cover Note: Depending on the country or region of delivery, the labels might be slightly different from the ones in the following illustration. The new bottom cover FRU is shipped with a kit containing labels of several kinds. Apply those labels when you replace the bottom cover.
Page 72
For the labels that are not shipped with the new bottom cover, peel them off from the old bottom cover, and adhere them to the new one. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
The only exception to this is if the built-in battery is physically damaged or a customer is reporting a possible safety issue. If the Lenovo Vantage program is not installed on the computer, the customer should download and install the program to diagnose the built-in battery, before getting a non-physically damaged built-in battery replaced.
For access, remove this FRU: • “1010 Base cover assembly” on page 64 Attention: The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of data. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 75
When handling the M.2 solid-state drive, observe the following guidelines: • Replace the M.2 solid-state drive only for upgrade or repair. The M.2 solid-state drive is not designed for frequent changes or replacement. • Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep. •...
Black 0.181 Nm (1.85 kgf-cm) 1050 Speaker assembly For access, remove this FRU: • “1010 Base cover assembly” on page 64 Removal steps of the speaker assembly E14 Gen 4 E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
E15 Gen 4 When installing: Ensure that the connector is attached firmly and cables are routed properly. 1060 Wireless LAN card For access, remove this FRU: • “1010 Base cover assembly” on page 64 Removal steps of the wireless LAN card Step Screw (quantity) Color...
Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
1080 I/O board and I/O board cable Removal steps of the I/O board and I/O board cable (E14 Gen 4) For access, remove these FRUs: • “1010 Base cover assembly” on page 64 • “1070 Thermal fan assembly” on page 72...
Page 80
Step Screw (quantity) Color Torque M2× L2.8 mm, flat-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgf-cm) When installing: Ensure that the screws are installed firmly. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 81
Removal steps of the I/O board and I/O board cable (E15 Gen 4) For access, remove these FRUs: • “1010 Base cover assembly” on page 64 • “1070 Thermal fan assembly” on page 72 Step Screw (quantity) Color Torque Black 0.294 Nm M2.5 ×...
Page 82
Step Screw (quantity) Color Torque M2× L2.8 mm, flat-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgf-cm) When installing: Ensure that the screws are installed firmly. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
1090 Power button (with fingerprint reader*) and power button (with fingerprint reader*) cable Removal steps of the power button (with fingerprint reader*) and power button (with fingerprint reader*) cable For access, remove these FRUs: • “1010 Base cover assembly” on page 64 •...
1110 Trackpad cable and trackpad For access, remove these FRUs: • “1010 Base cover assembly” on page 64 • “1020 Built-in battery” on page 67 Removal steps of the trackpad cable and trackpad E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Table 12. Screw specification Step Screw (quantity) Color Torque M2 × 2 mm, flat-head, nylon-coated (4) Black 0.181 Nm (1.85 kgf-cm) 1120 Earbuds Removal steps of the earbuds Chapter 8 Removing or replacing a FRU...
Removal steps of the earbud tray 1150 Earbud bracket For access, remove these FRUs: • “1010 Base cover assembly” on page 64 • “1020 Built-in battery” on page 67 • “1120 Earbuds” on page 79 • “1130 Earbud cable and earbud USB-C board” on page 80 •...
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated conductive surface. ThinkPad E14 Gen 4 and ThinkPad E15 Gen 4 share a common system board. After replacing the system board, you will be prompted to input a brand name to correctly identify the machine type. The following table contains the brand name required to complete this step.
Page 89
Central Processing Unit (CPU) Removal steps of the system board Step Screw (quantity) Color Torque M2.5 × L6 mm, flat-head, nylon-coated (2) Black 0.294 Nm (3.0 kgf-cm) Chapter 8 Removing or replacing a FRU...
Page 90
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 91
E14 Gen 4 Step Screw (quantity) Color Torque M2 × L2.8 mm, flat-head, nylon-coated (2) Black 0.181Nm (1.85 kgf-cm) M2 × L5 mm, flat-head, nylon-coated (3) Black 0.181Nm (1.85 kgf-cm) E15 Gen 4 Step Screw (quantity) Color Torque M2 × L2.8 mm, flat-head, nylon-coated (4) Silver 0.181Nm...
2. Click Config ➙ Keyboard/Mouse ➙ Keyboard Layout, and then select the keyboard language. 1180 LCD unit For access, remove these FRUs in order: • “1010 Base cover assembly” on page 64 Removal steps of the LCD unit for E14 Gen 4 Step Screw (quantity) Color Torque M2.5 ×...
Page 94
Removal steps of the LCD unit for E15 Gen 4 Step Screw (quantity) Color Torque M2.5 × L6 mm, flat-head, nylon-coated (5) Black 0.294 Nm (3.0 kgf-cm) E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
1190 Keyboard assembly For access, remove these FRUs in order: • “1010 Base cover assembly” on page 64 • “1020 Built-in battery” on page 67 • “1030 Memory module and memory module bracket” on page 68 • “1040 M.2 solid-state drive” on page 68 •...
E14 Gen 4 Removal steps of the LCD panel For access, remove this FRU in order: • “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 97
1. Grasp the ends of four elastic adhesive tapes with tweezers. Pull out each tape slowly in the direction as shown until four elastic tapes are all released from LCD unit . Then, Turn over the LCD panel Note: Do not pull the tapes too fast, otherwise, the tapes might snap. New tap should be ordered for LCD panel replacement.
Page 98
Peel off the release liners from the other side of the tapes. Ensure that four tapes are applied correctly as shown. 2. Attach the LCD cable to the LCD panel as shown. Turn over the LCD panel to secure the LCD panel with tapes. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 99
E15 Gen 4 Removal steps of the LCD panel For access, remove this FRU in order: • “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 1. Grasp the ends of four elastic adhesive tapes with tweezers. Pull out each tape slowly in the direction as shown until four elastic tapes are all released from LCD unit .
Page 100
Peel off the release liners from the other side of the tapes. Ensure that four tapes are applied correctly as shown. 2. Attach the LCD cable to the LCD panel as shown. Turn over the LCD panel to secure the LCD panel with tapes. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
2030 Hinge kit Removal steps of the hinge kit (E14 Gen 4) For access, remove these FRUs in order: • “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 Step Screw (quantity) Color Torque 0.294 Nm M2.5 ×...
2040 Camera and microphone combo card For access, remove these FRUs in order: • “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 • “2020 LCD panel” on page 90 E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 103
Removal steps of the camera and microphone combo card (E14 Gen 4) When installing: Ensure that the connector is attached firmly. Chapter 8 Removing or replacing a FRU...
• “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 • “2020 LCD panel” on page 90 Note: New tap should be ordered for eDP cable replacement. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
2060 Wireless LAN antenna assembly For access, remove these FRUs in order: • “1180 LCD unit” on page 86 • “2010 LCD bezel assembly” on page 89 • “2020 LCD panel” on page 90 E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Page 107
Removal steps of the wireless LAN antenna assembly (E14 Gen 4) Release the wireless LAN antenna assembly from the tabs as shown. Remove the wireless LAN antenna assembly from the LCD cover assembly. Antenna locations Wireless LAN auxiliary antenna (black)
Page 108
Removal steps of the Wireless LAN antenna assembly (E15 Gen 4) Release the wireless LAN antenna assembly from the tabs as shown. E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Remove the wireless LAN antenna assembly from the LCD cover assembly. Antenna locations Wireless LAN auxiliary antenna (black) Wireless LAN main antenna (gray) Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Page 110
E14 Gen 4 / E15 Gen 4 Hardware Maintenance Manual...
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Page 112
Trademarks LENOVO, LENOVO logo, THINKPAD, THINKPAD logo, and TRACKPOINT are trademarks of Lenovo. Microsoft and Windows are trademarks of the Microsoft group of companies. The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.