Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
Inspect the cable and connector for wear and damage to ensure items are safe before connecting to the power supply. If worn or
9
damaged DO NOT use.
Ensure the lamp is fully charged before initial use.
9
DO NOT charge in damp conditions.
8
DO NOT turn the lamp on when it is being charged.
8
DO NOT shine directly into your, another person's or an animal's eyes.
8
DO NOT allow children to use the lamp.
8
DO NOT handle or move the lamp whilst it is being charged.
8
DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged.
8
DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
8
recharge the battery at least once every six months of non-use.
DO NOT attempt to open, disassemble, modify or service the battery pack.
8
DO NOT crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 60°C (140°F).
8
Replace only with the battery pack designated for this product.
9
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin or eyes, rinse thoroughly with water.
9
DO NOT connect your small devices to charge while the power bank is in the process of charging.
8
DO NOT immerse in water.
8
DO NOT place near a fire or any other source of intense heat – battery could explode if heated.
8
Battery must be recycled or disposed of according to local regulations.
9
2. INTRODUCTION
3-in-1 Function floodlight made of a strong nylon plastic with thermoplastic rubber edges for durability. Features an ultra bright 20W COB LED
light producing up to 1100 lumens with three light settings: High 1100lm, Mid 580lm, Low 350lm (working time: 3, 5 and 15 hours respectively).
Work light also includes two good quality wireless speakers which can be easily linked to your tablet or smartphone. Fixed to the rear is a
sturdy 180° adjustable stand which can also be used as a carry handle. Has four strong magnets on the back for easy mounting to metal
applications such as a tool chest. Built-in power bank with a USB output and LED charge indicator. Micro USB charging lead included.
3. SPECIFICATION
Model No: ...................................................... LED100WS.V2
Battery: ........................................................3.7V 8Ah Li-poly
Charging Time: ..................................................................8hr
LED Qty: ........................................................ 20W COB LED
Lumen Output: ............................................................1100lm
Running Time: ..............................................................3-15hr
Speaker Output: ............................................................. 80db
USB Output: ............................................................... 5V / 1A
© Jack Sealey Limited
20W COB LED R/CHARGE WIRELESS
SPEAKER WORK LIGHT+POWER BANK
LED100WS.V2
MODEL NO:
Original Language Version
fig.1
Light
Speaker
LED100WS.V2 Issue 1 27/01/20
Advertisement
Related Manuals for Sealey LED100WS.V2
Summary of Contents for Sealey LED100WS.V2
- Page 1 LED100WS.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.