Page 3
1. Precaution Please read the precaution as follows to prevent any damages to the LCD Monitor. Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status. Prepare soft cloth and sponge as working platform to place LCD monitor horizontally.
2. Appropriate tools Select the Appropriate tools for disassembly and re-assembly. Phillips screwdriver (#2) Spacer screwdriver C/D disassembly tool Gloves or soft cloth Hot hair dryer...
Page 5
3. Disassembly SOP Put the monitor on a flat surface (Put the EPE under the monitor) Remove the screw * 2pcs Tool : Screwdriver #2 Pull out of stand Remove the label * 2pcs Tool : Hot hair dryer Remove the screw * 2pcs Tool : Screwdriver #2...
Page 6
Use the C/D disassembly tool to release Rear cover hook from disassemble hole on bottom Unplug the connector Remove the foil*2pcs Rasie the chassis and remove the foil*1pcs Remove the Black Tape*1pcs...
Page 7
Unplug LVDS line Remove the screw * 9pcs Tool : Screwdriver #2 Remove the K/P PCB Remove the mylar Remove All screws*4pcs Tool : Screwdriver #2...
Page 8
Remove the side screw*2pcs Tool : Spacer screwdriver Take out of the PCB...