1
Set Up
(15 Minutes)
Customers without AT&T voice service can skip steps A, B and C and start with step D.
A
Install Single-Port Filters on any wall
jacks with telephones, fax machines,
satellite receivers, or other connected
devices except the jack that will be used
by the modem.
!
Be sure to connect the filters to the wall
jack and not to the device.
B
Connect the Dual-Port Filter to the wall jack that will be used by the modem.
C
Connect the Phone Cable of any device sharing this jack to the Phone port on the Dual-Port Filter.
D
Connect the green Data Cable from the modem DSL port to the Dual-Port Filter DSL/HPNA port
(or directly to the jack if you do not have AT&T voice service).
E
Connect the yellow Ethernet Cable from the modem Ethernet port to the PC Ethernet port.
F
Connect the black Power Adapter from the modem Power port to the electrical outlet.
DSL Modem 3360 Quick Start Guide
All manuals and user guides at all-guidesbox.com
DSL Modem
3360
Quick Start Guide
Get Started
(Approximate Total Time: 60 Minutes)
Before you begin:
1. Check your High Speed Internet Service
Activation Date.
You can only connect to the Internet after your service has been
activated—which may take until 8pm on your Service Activation
Date (located on your confirmation letter or packing slip).
Gather materials needed for setup:
DSL Modem 3360 Quick Start Guide
1
Set Up
(continued)
2
DSL Modem 3360 Quick Start Guide
2. Do you have a monitored security system or
health alarm?
See the "Specific Issues" section later in this guide for
details.
*Filters are not necessary
for customers without
AT&T voice service.
1
3