Sanyo Flexi-Multi KMS1872 User Manual
Sanyo flexi-multi kms1872: user guide
Hide thumbs
Also See for Flexi-Multi KMS1872:
- Technical & service manual (85 pages) ,
- Specifications (2 pages) ,
- Installation instructions manual (27 pages)
Table of Contents
Advertisement
01_KMS1872_En.fm Page 2 Monday, November 14, 2005 1:28 PM
This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions
are provided below; refer to these descriptions when using the air conditioner.
•
Microprocessor Controlled Operation
The interior compartment of the remote control unit
contains several features to facilitate automatic
operation, easy logically displayed for easy use.
•
Simple One-touch Wireless Remote Control
The remote control unit has several features to
facilitate automatic operation.
•
24-Hour ON or OFF Timer
This timer can be set to automatically turn the unit
on or off at any time within a 24 hour period.
•
1-Hour OFF Timer
This timer can be set to automatically turn off the
unit at any time after one hour.
•
Night Setback
Pressing this button changes the setting of the
room temperature thermostat, allowing you to set
the temperature at whatever level that you find
comfortable.
•
Automatic and 3-step Fan Speed
Auto/High/Medium/Low
•
Air Sweep Control
This function moves a flap up and down in the air
outlet, directing air in a sweeping motion around the
room and providing comfort in every corner.
•
Auto. Flap Control
This automatically sets the flap to the optimum
position during cooling and drying operation.
2
Features
•
Automatic Restart Function for Power Failure
•
High Power Operation
•
Quiet Operation
•
ION Operation
•
Anti-Mold Filter
•
Air Clean Filter
Even when power failure occurs, preset
programmed operation can be reactivated once
power resumes.
The unit operates at maximum output for 30
minutes, regardless of the desired temperature.
The fan speed is 1 step above "High".
The fan rotates slower than the fan speed setting to
provide a quieter operating sound.
While it is operating, the unit generates negative
ions that freshen up the air in the room.
This unit is equipped with an anti-mold filter that
inhibits the growth of mold and bacteria.
An air filter that eliminates unpleasant odors and
cleans the air is available.
Purchase a replacement filter at your local dealer.
(model STK-FDXB)
OI-807-2-EG
Advertisement
Table of Contents
Related Manuals for Sanyo Flexi-Multi KMS1872
Summary of Contents for Sanyo Flexi-Multi KMS1872
-
Page 1: Features
01_KMS1872_En.fm Page 2 Monday, November 14, 2005 1:28 PM Features This air conditioner is an inverter type unit that automatically adjusts capacity as appropriate. Details on these functions are provided below; refer to these descriptions when using the air conditioner. -
Page 2: Table Of Contents
Troubleshooting... 24 Operating Range... 24 Product Information If you have problems or questions concerning your Air Conditioner, you will need the following information. Model and serial numbers are on the nameplate on the bottom of the cabinet. Model No. ______________________ Date of purchase ________________________________________________ Dealer’s address ________________________________________________... -
Page 3: Installation Location
Otherwise there is a risk of suffocation in an extreme case. • Do not turn the air conditioner on and off from the power mains switch. Use the ON/OFF operation button. • Do not stick anything into the air outlet of the outdoor unit. This is dangerous because the fan is rotating at high speed. -
Page 4: Names Of Parts
Consequently, the shape may differ from that of the air conditioner which you have selected. This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote control unit. Air Intake Air from the room is drawn into this section and passes through air filters which remove dust. -
Page 5: Unit Display And Operation Button
(within 4 ft.) the remote control receiver. Some radio equipment may cause malfunction of the unit. If the trouble happens, disconnect power and restart the air conditioner after a few minutes. REMOTE CONTROL receiver OPERATION button OPERATION lamp TIMER lamp... -
Page 6: Remote Control Unit (Display)
01_KMS1872_En.fm Page 7 Monday, November 14, 2005 1:28 PM Remote Control Unit (Display) Displayed when the time display is set to 12-hour time. (1) Operation mode MILD DRY ... COOL ... FAN ... (2) Fan speed Automatic operation ... HIGH ... MEDIUM... -
Page 7: Remote Control Unit
The illustration above pictures the remote control unit after the cover has been opened. When you press the buttons on the remote control unit, the the display to transmit the setting changes to the receiver in the air conditioner. A temperature sensor inside the remote control unit senses the room temperature. - Page 8 : The air conditioner starts at the set time. : The air conditioner stops at the set time. : The air conditioner stops and starts, or starts and stops, at the set times every day. For details, see “Setting the Timer”.
-
Page 9: Using The Remote Control Unit
If the signal from the remote control unit stops for more than 15 minutes due to the loss of the remote control unit or other trouble, the air conditioner will switch to the temperature sensor which is built into the indoor unit and control the room temperature. In these cases, the temperature around the remote control unit may differ from the temperature detected at the air conditioner’s position. - Page 10 Before mounting the remote control unit, press the ON/OFF operation button at Unit the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.
-
Page 11: Operation With The Remote Control Unit
Check that the circuit breaker on the power panel is turned on. NOTE Press the setting buttons as described below and change the settings as desired. To stop the air conditioner, press the ON/OFF operation button again. STEP 2 STEP 3... -
Page 12: Adjusting The Fan Speed
01_KMS1872_En.fm Page 13 Monday, November 14, 2005 1:28 PM Operation with the Remote Control Unit (continued) • NOTE • 2. Adjusting the Fan Speed A. Automatic fan speed Simply set the FAN SPEED selector button to the This automatically sets the best fan speed for the room temperature. B. -
Page 13: Night Setback Mode
Mode: ( mark appears in the display. When the night setback mode is selected, the air conditioner automatically raises the temperature setting 2 °F when 30 minutes have passed after the selection was made, and then another 2 °F after another 30 minutes have passed, regardless of the indoor temperature when night setback was selected. -
Page 14: Quiet Mode
01_KMS1872_En.fm Page 15 Monday, November 14, 2005 1:28 PM Operation with the Remote Control Unit (continued) 5. QUIET Mode QUIET Mode is used to reduce the fan sound of the indoor unit. Press the QUIET button. To cancel, press QUIET button again. •... -
Page 15: Special Remarks
In cooling operation, any plastic parts may shrink due to a sudden temperature change. In this event, a clicking sound may occur. This is normal, and the sound will soon disappear. The remote control unit sends the setting condition to the air conditioner regularly at five minute intervals. OI-807-16-EG... -
Page 16: Setting The Timer
• 1. How to set the present (Example) To set to 10:30 pm. time 2. How to set the OFF time (Example) To stop the air conditioner at 11:00 am. OI-807-17-EG Temperature: °F Time: AM, PM Operation 1. Press the CLOCK button once if The time indication alone flashes. - Page 17 3. How to set the ON time (Example) To start operation at 7:10 am. 4. How to set DAILY ON/OFF (Example) To start operation at 7:10 am. and stop the air conditioner at 11:00 am. REPEAT timer To cancel a timer program •...
-
Page 18: Using The 1-Hour Off Timer
01_KMS1872_En.fm Page 19 Monday, November 14, 2005 1:28 PM Using the 1-Hour OFF Timer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. Setting procedure: Regardless of whether the unit is operating or stopped, press the 1 HR. -
Page 19: Adjusting The Airflow Direction
01_KMS1872_En.fm Page 20 Monday, November 14, 2005 1:28 PM Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. When the humidity is high, the vertical vanes should be in the front CAUTION position during the cooling or dehumidifying operation. -
Page 20: Operation Without The Remote Control Unit
Auto. Care and Cleaning 1. For safety, be sure to turn the air conditioner off and also to disconnect 2. Do not pour water on the indoor unit to clean it. This will damage the... - Page 21 01_KMS1872_En.fm Page 22 Monday, November 14, 2005 1:28 PM Care and Cleaning (continued) Anti-Mold Filter The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks. How to remove the anti-mold 1. Grasp both ends of the air filter 2.
- Page 22 01_KMS1872_En.fm Page 23 Monday, November 14, 2005 1:28 PM Care and Cleaning (continued) Air Clean Filter The air clean filter removes dust and dirt from the air, and reduces odors and smoke from tobacco. This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room.
-
Page 23: Troubleshooting
01_KMS1872_En.fm Page 24 Monday, November 14, 2005 1:28 PM Troubleshooting If your air conditioner does not work properly, first check the following points before requesting service. If it still does not work properly, contact your dealer or service center. Trouble Air conditioner does not run at all. - Page 24 01_KMS1872_En.fm Page 25 Monday, November 14, 2005 1:28 PM...