hit counter script
Lenovo 13ACN5 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. 13ACN5
  6. Hardware maintenance manual
Lenovo 13ACN5 Hardware Maintenance Manual

Lenovo 13ACN5 Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Hardware Maintenance Manual
Yoga Slim 7i (13",05), Yoga Slim 7i Carbon and Yoga Slim 7 (13",05)

Advertisement

Table of Contents
loading

Related Manuals for Lenovo 13ACN5

Summary of Contents for Lenovo 13ACN5

  • Page 1 Hardware Maintenance Manual Yoga Slim 7i (13″,05), Yoga Slim 7i Carbon and Yoga Slim 7 (13″,05)
  • Page 2 First Edition (February 2021) © Copyright Lenovo 2021.

  • Page 3: Table Of Contents

    Remove the I/O board bracket (right) ..Removal procedure for Yoga Slim 7 13ITL5 and Yoga Slim 7 13ACN5 ... . . Remove the I/O board ..
  • Page 4 Hardware Maintenance Manual...

  • Page 5: About This Manual

    Important: • This manual is intended only for trained service technicians who are familiar with Lenovo products. • Before servicing a Lenovo product, be sure to read all the information under Chapter 1 “Safety information” on page 1. © Copyright Lenovo 2021...
  • Page 6 Hardware Maintenance Manual...

  • Page 7: Chapter 1. Safety Information

    • Do not work alone under hazardous conditions or near equipment that has hazardous voltages. • Disconnect all power before: – Performing a mechanical inspection – Working near power supplies © Copyright Lenovo 2021...

  • Page 8: Safety Inspection Guide

    This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.

  • Page 9: Handling Devices That Are Sensitive To Electrostatic Discharge

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 10: Grounding Requirements

    Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Safety notices (multilingual translations) The safety notices in this section are provided in the following languages: •...
  • Page 11 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 Hardware Maintenance Manual...
  • Page 13 PERIGO PERIGO PERIGO Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO Hardware Maintenance Manual...
  • Page 15 DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER DANGER DANGER DANGER VORSICHT Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 VORSICHT VORSICHT VORSICHT Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 Hardware Maintenance Manual...
  • Page 25 Chapter 1 Safety information...
  • Page 26 Hardware Maintenance Manual...

  • Page 27: Chapter 2. General Checkout

    • Scratched (cosmetic) parts • Distortion, deformation, or discoloration of the cosmetic parts • Plastic parts, latches, pins, or connectors that have been cracked or broken by excessive force • Damage caused by liquid spilled into the system © Copyright Lenovo 2021...

  • Page 28: Cru List

    Table 2. Model: Yoga Slim 7 Carbon 13ITL5 (MT: 82EV) Type ac power adapter self-service Power cord * self-service Table 3. Model: Yoga Slim 7 13ACN5 (MT: 82CY) Type ac power adapter self-service Power cord * self-service * for selected models...

  • Page 29: Chapter 3. Identifying Frus (Crus)

    Chapter 3. Identifying FRUs (CRUs) Locate FRUs and CRUs The exploded illustrations help Lenovo service technicians identify FRUs or CRUs that they may need to replace when servicing a customer’s computer. Figure 1. Yoga Slim 7 13ITL5 exploded view Table 4. FRU (CRU) categories...
  • Page 30 Table 4. FRU (CRU) categories (continued) Heat sink I/O board bracket (right) I/O board I/O board cable Wi-Fi card Solid-state drive (SSD) Solid-state drive (SSD) mylar Speakers Lower case Touchpad board cable Touchpad board Battery pack System board mylar System board I/O board bracket (left) Power cord * ac power adapter...
  • Page 31 Figure 2. Yoga Slim 7 13ITL5 LCD unit - exploded view Table 5. FRU categories for the LCD unit FRU (CRU) category LCD cover Camera cable Hinges Removable tape Strip cover Hinge cover LCD module EDP cable Camera Microphone rubbers TOF rubber Chapter 3 Identifying FRUs (CRUs)
  • Page 32 Table 5. FRU categories for the LCD unit (continued) Camera tape Sensor mylars Hardware Maintenance Manual...
  • Page 33 Figure 3. Yoga Slim 7 Carbon 13ITL5 exploded view Chapter 3 Identifying FRUs (CRUs)
  • Page 34 Table 6. FRU (CRU) categories FRU (CRU) category LCD unit Upper case (with keyboard) I/O bracket (left) I/O board I/O board tape System board I/O bracket (right) Heat sink Speakers Touchpad board Lower case Touchpad board cable Battery pack System board mylar I/O board cable Solid-state drive (SSD) Solid-state drive (SSD) mylar...
  • Page 35 Figure 4. Yoga Slim 7 Carbon 13ITL5 LCD unit — exploded view Table 7. FRU categories for the LCD unit FRU (CRU) category LCD bezel LCD panel Removable tape Camera cable Camera mylar Strip cover Hinges LCD cover Chapter 3 Identifying FRUs (CRUs)
  • Page 36 Table 7. FRU categories for the LCD unit (continued) EDP cable Hinge cover Camera Camera tape Microphone rubbers Camera rubber Hardware Maintenance Manual...
  • Page 37 Figure 5. Yoga Slim 7 13ACN5 exploded view Table 8. FRU (CRU) categories FRU (CRU) category Upper case (with keyboard) Heat sink Right-fan tape Fans I/O board bracket (right) I/O board I/O board cable Chapter 3 Identifying FRUs (CRUs)
  • Page 38 Table 8. FRU (CRU) categories (continued) Battery pack Speakers Wi-Fi card Solid-state drive (SSD) Solid-state drive (SSD) mylar Lower case Touchpad board Touchpad board cable System board mylar System board I/O board bracket (left) Power cord * ac power adapter I/O board tape Solid-state drive (SSD) ThermalPad Touchpad sponges...
  • Page 39 Figure 6. Yoga Slim 7 13ACN5 LCD unit - exploded view Table 9. FRU categories for the LCD unit FRU (CRU) category LCD cover Camera cable Hinges Removable tape Strip cover Hinge cover LCD module EDP cable Camera Microphone rubbers...
  • Page 40 Hardware Maintenance Manual...

  • Page 41: Chapter 4. Removing A Fru Or Cru

    Chapter 4. Removing a FRU or CRU Service tools The following table lists tools for servicing Lenovo computers. Tools with a cross mark are needed for serving the product models as described by this publication. Prepare them before you service the product.

  • Page 42: Removal Procedure For Yoga Slim 7 13Itl5 And Yoga Slim 7 13Acn5

    Attention: The system board is sensitive to and can be damaged by ESD. Before touching it, establish personal grounding by touching a ground point with one hand or by using an ESD strap (P/N 6405959). Removal procedure for Yoga Slim 7 13ITL5 and Yoga Slim 7 13ACN5 Remove the lower case Make sure the computer has been shut down before servicing the computer.

  • Page 43: Remove The Battery Pack

    Step 3. Pry up the latches and then remove the lower case. Figure 8. Pry up the latches and then remove the lower case Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Lower case Remove the battery pack Make sure the following FRUs (or CRUs) have been removed.

  • Page 44: Remove The Solid-State Drive (Ssd) Module

    Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Battery pack Remove the solid-state drive (SSD) module Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 36 Step 1.

  • Page 45: Remove The Wi-Fi Card

    Step 5. Remove the SSD mylar. Figure 13. Remove the SSD mylar Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: SSD mylar SSD ThermalPad Remove the Wi-Fi card Make sure the following FRUs (or CRUs) have been removed.

  • Page 46: Remove The Heat Sink (For Yoga Slim 7 13Itl5)

    Number of screws M2 x L1.8 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Wi-Fi card Remove the heat sink (for Yoga Slim 7 13ITL5) Make sure the following FRUs (or CRUs) have been removed.

  • Page 47: Remove The Fans (For Yoga Slim 7 13Itl5)

    Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Heat sink Remove the fans (for Yoga Slim 7 13ITL5) Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 36 Step 1.

  • Page 48: Remove The Right-Fan Tape (For Yoga Slim 7 13Acn5)

    Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 36 “Remove the right-fan tape (for Yoga Slim 7 13ACN5)” on page 42 Step 1. Disconnect the battery pack cable from the system board.

  • Page 49: Remove The Fans (For Yoga Slim 7 13Acn5)

    Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 36 “Remove the right-fan tape (for Yoga Slim 7 13ACN5)” on page 42 Step 1. Disconnect the battery pack cable from the system board.

  • Page 50: Remove The Speakers

    Figure 21. Remove five screws and then remove the fans Number of screws Screw specifications M2 x L4.0 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Fans Remove the speakers Make sure the following FRUs (CRUs) have been removed.

  • Page 51: Remove The I/O Board Bracket (Left)

    Screw specifications Number of screws M1.6 x L1.7 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Speakers Remove the I/O board bracket (left) Make sure the following FRUs (or CRUs) have been removed.

  • Page 52: Remove The I/O Board Bracket (Right)

    Figure 25. Remove the left I/O board bracket Screw specifications Number of screws M2 x L4.0 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: I/O board bracket (left) Remove the I/O board bracket (right) Make sure the following FRUs (or CRUs) has been removed.

  • Page 53: Remove The I/O Board

    I/O board bracket (right) Remove the I/O board Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 36 Step 1. Disconnect the battery pack cable from the system board. Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable. Step 2.

  • Page 54: Remove The Touchpad Board Cable

    Screw specifications Number of screws M2 x L4.0 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: I/O board I/O board tape Remove the touchpad board cable Make sure the following FRUs (CRUs) have been removed.

  • Page 55: Remove The Touchpad Board

    Figure 30. Remove the touchpad board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Touchpad board cable Remove the touchpad board Make sure the following FRUs (CRUs) have been removed.

  • Page 56: Remove The Touchpad Sponges

    Number of screws M1.6 x L1.7 Step 3. Remove the touchpad board. Figure 33. Remove the touchpad board Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Touchpad board Touchpad conductive tape Touchpad cloth Remove the touchpad sponges Make sure the following FRUs (CRUs) have been removed.

  • Page 57: Remove The System Board, System Board Mylar And The I/O Board Cable

    “Remove the heat sink (for Yoga Slim 7 13ITL5)” on page 40 “Remove the fans (for Yoga Slim 7 13ITL5)” on page 41 “Remove the right-fan tape (for Yoga Slim 7 13ACN5)” on page 42 “Remove the heat sink (for Yoga Slim 7 13ACN5)” on page 42 “Remove the fans (for Yoga Slim 7 13ACN5)”...
  • Page 58 Figure 35. Disconnect cables connected to the system board Step 2. Peel off the I/O board tape and then disconnect the I/O board cable from the I/O board. Figure 36. Peel off the I/O board tape and then disconnect the I/O board cable from the I/O board Step 3.
  • Page 59 Figure 38. Peel off the tape and then disconnect the I/O board cable from the system board Step 5. Remove the system board mylar. Figure 39. Remove the system board mylar Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: System board System board mylar...

  • Page 60: Remove The Lcd Unit

    The Golden Key U1 tool is prepared by running the U1 Update software on a FAT32-formatted USB thumb drive. Go to for detailed instructions on how to create http://support.lenovo.com/us/en/solutions/HT506954 and use a Goldern Key U1 tool. Remove the LCD unit Make sure the following FRUs (CRUs) have been removed.

  • Page 61: Remove The Upper Case (With Keyboard)

    “Remove the heat sink (for Yoga Slim 7 13ITL5)” on page 40 “Remove the fans (for Yoga Slim 7 13ITL5)” on page 41 “Remove the right-fan tape (for Yoga Slim 7 13ACN5)” on page 42 “Remove the heat sink (for Yoga Slim 7 13ACN5)” on page 42 “Remove the fans (for Yoga Slim 7 13ACN5)”...

  • Page 62: Disassemble The Lcd Unit

    Remove the hinge cover. Figure 42. Remove the hinge cover Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Hinge cover Remove the strip cover Make sure the following FRUs (CRUs) have been removed.
  • Page 63 Figure 44. Remove five screws and then remove the strip cover Screw specifications Number of screws M1.6 x L3.5 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Strip cover Remove the LCD module Make sure the following FRUs (CRUs) have been removed.
  • Page 64 Figure 46. Remove the removable tape with tweezers and then remove the LCD module Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: LCD module Removable tape Remove the EDP cable Make sure the following FRUs (CRUs) have been removed.
  • Page 65 Figure 48. Disconnect the EDP cable from the LCD module and then remove the EDP cable Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: EDP cable Removable tape Remove the camera module (for Yoga Slim 7 13ITL5) Make sure the following FRUs (CRUs) have been removed.
  • Page 66 Figure 50. Detach the camera connector and then remove the camera and the camera tape Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Camera Camera cable Camera tape Sensor mylars Removable tape Remove the camera module (for Yoga Slim 7 13ACN5) Make sure the following FRUs (CRUs) have been removed.
  • Page 67 “Remove the strip cover” on page 56 “Remove the LCD module” on page 57 “Remove the camera module (for Yoga Slim 7 13ITL5)” on page 59 “Remove the camera module (for Yoga Slim 7 13ACN5)” on page 60 Step 1. Remove the microphone rubbers.
  • Page 68 “Remove the strip cover” on page 56 “Remove the LCD module” on page 57 “Remove the camera module (for Yoga Slim 7 13ITL5)” on page 59 “Remove the camera module (for Yoga Slim 7 13ACN5)” on page 60 Step 1. Remove the TOF rubber.
  • Page 69 “Remove the EDP cable” on page 58 “Remove the camera module (for Yoga Slim 7 13ITL5)” on page 59 “Remove the camera module (for Yoga Slim 7 13ACN5)” on page 60 “Remove the microphone rubbers” on page 61 “Remove the TOF rubber” on page 62 “Remove the hinges”...

  • Page 70: Removal Procedure For Yoga Slim 7 Carbon 13Itl5

    Pry up the latches and then remove the lower case. Figure 57. Pry up the latches and then remove the lower case Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Lower case Hardware Maintenance Manual...

  • Page 71: Remove The Battery Pack

    Screw specifications Number of screws M2 x L4.0 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Battery pack Remove the solid-state drive (SSD) module Make sure the following FRUs (or CRUs) have been removed.
  • Page 72 Figure 59. Remove the SSD ThermalPad Step 3. Remove one screw. Figure 60. Remove one screw Screw specifications Number of screws M2 x L1.8 Step 4. Remove the SSD module by pulling it away from the slot. Figure 61. Remove the SSD module Step 5.

  • Page 73: Remove The Wi-Fi Card

    Screw specifications Number of screws M2 x L1.8 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Wi-Fi card Remove the heat sink Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 64 Step 1.

  • Page 74: Remove The Fan

    Figure 64. Remove three screws and then remove the heat sink Screw specifications Number of screws M2 x L1.8 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Heat sink Remove the fan Make sure the following FRUs (or CRUs) have been removed.

  • Page 75: Remove The Speakers

    Figure 66. Remove two screws and then remove the fan Screw specifications Number of screws M2 x L4.0 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Remove the speakers Make sure the following FRUs (CRUs) have been removed.

  • Page 76: Remove The I/O Board Bracket (Left)

    Screw specifications Number of screws M1.6 x L1.7 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Speakers Remove the I/O board bracket (left) Make sure the following FRUs (or CRUs) have been removed.

  • Page 77: Remove The I/O Board Bracket (Right)

    Number of screws M2 x L4.0 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: I/O board bracket (left) Remove the I/O board bracket (right) Make sure the following FRUs (or CRUs) have been removed.

  • Page 78: Remove The I/O Board

    I/O board bracket (right) Remove the I/O board Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 64 “Remove the fan” on page 68 Step 1. Disconnect the battery pack cable from the system board. Attention: Use your fingernails to pull the connector to unplug it.

  • Page 79: Remove The Touchpad Board Cable

    Figure 74. Remove one screw and then remove the I/O board Screw specifications Number of screws M2.0 x L4.0 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: I/O board I/O board tape Power button sponge Remove the touchpad board cable Make sure the following FRUs (CRUs) have been removed.

  • Page 80: Remove The Touchpad Board

    Figure 75. Remove the touchpad board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Touchpad board cable Remove the touchpad board Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 64 “Remove the battery pack”...

  • Page 81: Remove The System Board, System Board Mylar And The I/O Board Cable

    Step 3. Remove the touchpad board. Figure 78. Remove the touchpad board Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Touchpad board Touchpad conductive tape Touchpad cloth Remove the system board, system board mylar and the I/O board cable Make sure the following FRUs (or CRUs) have been removed.
  • Page 82 Figure 79. Disconnect cables connected to the system board Step 2. Peel off the I/O board tape and then disconnect the I/O board cable from the I/O board. Figure 80. Peel off the I/O board tape and then disconnect the I/O board cable from the I/O board. Step 3.
  • Page 83 Figure 82. Peel off the tape and then disconnect the I/O board cable from the system board Step 5. Remove the system board mylar. Figure 83. Remove the system board mylar Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: System board System board mylar...

  • Page 84: Remove The Lcd Unit

    The Golden Key U1 tool is prepared by running the U1 Update software on a FAT32-formatted USB thumb drive. Go to for detailed instructions on how to create http://support.lenovo.com/us/en/solutions/HT506954 and use a Goldern Key U1 tool. Remove the LCD unit Make sure the following FRUs (CRUs) have been removed.

  • Page 85: Remove The Upper Case (With Keyboard)

    “Remove the system board, system board mylar and the I/O board cable” on page 75 “Remove the LCD unit” on page 78 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Upper case (with keyboard) Disassemble the LCD unit The LCD unit as a whole is not an FRU.
  • Page 86 Step 1. Remove the hinge cover. Figure 86. Remove the hinge cover Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Hinge cover Remove the LCD bezel Make sure the following unit has been removed.
  • Page 87 Screw specifications Number of screws M1.6 x L3.5 Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement part: Strip cover Remove the hinges Make sure the following FRUs (CRUs) have been removed. “Remove the LCD unit” on page 78 “Remove the hinge cover”...
  • Page 88 Figure 90. Remove six screws and then remove the hinges Screw specifications Number of screws M2.0 x L2.3 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: Hinges Remove the LCD panel Make sure the following FRUs (CRUs) have been removed.
  • Page 89 Figure 91. Remove the two pieces of removable tape with tweezers and then remove the LCD panel Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: LCD panel Removable tape Remove the EDP cable Make sure the following FRUs (CRUs) have been removed.
  • Page 90 Figure 93. Disconnect the EDP cable from the LCD module and then remove the EDP cable Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: EDP cable Removable tape Remove the microphone rubbers Make sure the following FRUs (CRUs) have been removed.
  • Page 91 Step 1. Remove the camera rubber. Figure 95. Remove the camera rubber Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: Camera rubber Removable tape Remove the camera module Make sure the following FRUs (CRUs) have been removed.
  • Page 92 Detach the camera connector and then remove the camera and the camera tape. Figure 97. Detach the camera connector and then remove the camera and the camera tape Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: Camera Camera mylars...
  • Page 93 Go to to look up the Lenovo part number of the following replacement https://support.lenovo.com/partslookup part: LCD cover Chapter 4 Removing a FRU or CRU...
  • Page 94 Hardware Maintenance Manual...

  • Page 95: Appendix A. Label Locations

    SDPPI Label 15 mm x 10 mm Malaysia label 8 mm x 8 mm 43 mm x 24 mm KCC label 22 mm x 30 mm India BIS label 10 mm x 9 mm Vietnam MEPS label © Copyright Lenovo 2021...
  • Page 96 Figure 99. Label layout on the back side of the base cover (Yoga Slim 7 Carbon 13ITL5) Labels attached to the base cover are country/region specific. Make sure to apply the appropriate labels to the replacement base cover. Table 12. All base cover labels (Yoga Slim 7 Carbon 13ITL5) Label Label name Label dimensions...
  • Page 97 Figure 100. Label layout on the back side of the base cover (Yoga Slim 7 13ACN5) Labels attached to the base cover are country/region specific. Make sure to apply the appropriate labels to the replacement base cover. Table 13. All base cover labels (Yoga Slim 7 13ACN5)
  • Page 98 Hardware Maintenance Manual...

  • Page 99: Trademarks

    Trademarks LENOVO and the LENOVO logo are trademarks of Lenovo. All other trademarks are the property of their respective owners. © 2021 Lenovo.

This manual is also suitable for:

Yoga slim 7i carbonYoga slim 7Yoga slim 7i13itl5

Table of Contents