hit counter script
Dell Inspiron 15 5000 Series Owner's Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Laptop
  5. Inspiron 15 5000 Series
  6. Owner's manual

Dell Inspiron 15 5000 Series Owner's Manual

Hide thumbs Also See for Inspiron 15 5000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Inspiron 15
5000 Series
Owner's Manual
Computer Model: Inspiron 5545
Regulatory Model: P39F
Regulatory Type: P39F002

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron 15 5000 Series

Summary of Contents for Dell Inspiron 15 5000 Series

  • Page 1 Inspiron 15 5000 Series Owner's Manual Computer Model: Inspiron 5545 Regulatory Model: P39F Regulatory Type: P39F002...
  • Page 2 WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks ™...

  • Page 3: Table Of Contents

    Contents Before Working Inside Your Computer........9 ....................9 Before You Begin ..................... 9 Safety Instructions ..................10 Recommended Tools After Working Inside Your Computer........11 Removing the Base Cover............12 ......................12 Procedure Replacing the Base Cover............14 ......................14 Procedure Removing the Battery...............
  • Page 4 Removing the Memory Module(s).......... 21 ..................... 21 Prerequisites ......................21 Procedure Replacing the Memory Module(s).......... 23 ......................23 Procedure ....................23 Post-requisites Removing the Wireless Card........... 24 .....................24 Prerequisites ......................24 Procedure Replacing the Wireless Card........... 26 ......................26 Procedure ....................26 Post-requisites Removing the Fan..............27 .....................27...
  • Page 5 Removing the Base Frame............38 .....................38 Prerequisites ......................38 Procedure Replacing the Base Frame............43 ......................43 Procedure ....................43 Post-requisites Removing the Coin-Cell Battery..........44 ....................44 Prerequisites ......................45 Procedure Replacing the Coin-Cell Battery..........46 ......................46 Procedure ....................46 Post-requisites Removing the Heat Sink............47...
  • Page 6 Removing the Speakers............53 .....................53 Prerequisites ......................53 Procedure Replacing the Speakers............55 ......................55 Procedure ....................55 Post-requisites Removing the Status-Light Board..........56 .....................56 Prerequisites ......................56 Procedure Replacing the Status-Light Board.......... 58 ......................58 Procedure ....................58 Post-requisites Removing the Power-Adapter Port........59 .....................59 Prerequisites ......................
  • Page 7 Removing the Display Assembly..........67 .....................67 Prerequisites ......................67 Procedure Replacing the Display Assembly..........70 ......................70 Procedure ....................71 Post-requisites Removing the Palm Rest............72 .....................72 Prerequisites ......................73 Procedure Replacing the Palm Rest............75 ......................75 Procedure ....................75 Post-requisites Removing the Display Bezel............ 76 .....................76 Prerequisites ......................77...
  • Page 8 Removing the Display Back-Cover and Antenna Assembly..................88 ....................88 Prerequisites ......................88 Procedure Replacing the Display Back-Cover and Antenna Assembly..................90 ......................90 Procedure ....................90 Post-requisites Flashing the BIOS...............91 Getting Help and Contacting Dell..........92 ..................92 Self-Help Resources ....................92 Contacting Dell...

  • Page 9: Before Working Inside Your Computer

    Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety. WARNING: Before working inside your computer, read the safety information that shipped with your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/ regulatory_compliance.

  • Page 10: Recommended Tools

    WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the power source. CAUTION: To avoid damaging the computer, make sure that the work surface is flat and clean.

  • Page 11: After Working Inside Your Computer

    After Working Inside Your Computer CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer. Replace all screws and make sure that no stray screws remain inside your computer. Connect any external devices, peripherals, and cables you removed before working on your computer.

  • Page 12: Removing The Base Cover

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Close the display and turn the computer over. Remove the screws that secure the base cover to the base frame.
  • Page 13 Using a plastic scribe, pry the base cover off the base frame. plastic scribe notch base cover...

  • Page 14: Replacing The Base Cover

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the tabs on the base cover into the base frame and snap the base cover into place.

  • Page 15: Removing The Battery

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Procedure Remove the screws that secure the battery to the base frame.

  • Page 16: Replacing The Battery

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the screw holes the battery with the screw holes on the base frame and press-down the battery to connect it to the battery connector.

  • Page 17: Removing The Hard Drive

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On state.
  • Page 18 Using the pull tab, slide the hard-drive assembly out of the base frame. pull tab screws (4) hard-drive assembly Disconnect the hard-drive cable from the hard drive. hard-drive assembly hard-drive cable Remove the screws that secure the hard-drive bracket to the hard drive.
  • Page 19 Lift the hard drive off the hard-drive bracket . screws (4) hard-drive bracket...

  • Page 20: Replacing The Hard Drive

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive. Procedure Place the hard drive in the hard drive bracket and align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

  • Page 21: Removing The Memory Module(S)

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 22 Slide and remove the memory module from the memory-module slot. memory module memory-module slot securing clips...

  • Page 23: Replacing The Memory Module(S)

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the notch on the memory module with the tab on the memory- module slot.

  • Page 24: Removing The Wireless Card

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 25 Lift the wireless card, and then slide and remove it from the system board. antenna cables screw wireless card...

  • Page 26: Replacing The Wireless Card

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure CAUTION: To avoid damage to the wireless card, do not place any cables under it.

  • Page 27: Removing The Fan

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 28 Note the display-cable routing and remove the cable from the routing guides. routing guide display cable Disconnect the fan cable from the system board. Note the fan-cable routing and remove the cable from the routing guides.
  • Page 29 Remove the screws that secure the fan to the base frame. fan cable screws (2) Lift the fan off the base frame.

  • Page 30: Replacing The Fan

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the screw holes on the fan with the screw holes on the base frame. Replace the screws that secure the fan to the base frame.

  • Page 31: Removing The Keyboard

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 32 Using a plastic scribe, gently release the tabs that secure the keyboard to the palm-rest assembly. keyboard tabs (6) plastic scribe Carefully turn the keyboard over and place it on the palm-rest assembly.
  • Page 33 Lift the latches and disconnect the keyboard and keyboard-backlight cables from the system board. NOTE: The keyboard-backlight cable is present only if the laptop shipped with a backlit keyboard. keyboard cable latch keyboard-backlight cable Lift the keyboard, along with the cables, off the palm-rest assembly.

  • Page 34: Replacing The Keyboard

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure NOTE: If you are installing a new keyboard, fold the cables the same way they are folded on the old keyboard. For more information, see “Folding...
  • Page 35 NOTE: Keyboard-backlight cable is present only on a backlit-keyboard. Place the keyboard on a flat and clean surface. keyboard cable keyboard-backlight cable keyboard CAUTION: Do not apply excess pressure while folding the cables. Lift the keyboard cable and gently fold the keyboard-backlight cable at the fold line.

  • Page 36: Post-Requisites

    Using the alignment line, gently fold the keyboard cable. keyboard cable alignment line Post-requisites Replace the battery.
  • Page 37 Replace the base cover.

  • Page 38: Removing The Base Frame

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 39 Lift the latches and disconnect the status-light cable and touchpad cable from the system board. status-light cable latch touchpad cable...
  • Page 40 Remove the screws that secure the base frame to the palm-rest assembly. palm-rest assembly screws (10) Close the display and turn the computer over.
  • Page 41 Remove the screws that secure the base frame to the palm-rest assembly. screws (9) base frame...
  • Page 42 Using your fingertips, starting from the rear, pry the base frame off the palm-rest assembly. NOTE: Make sure the display cable is completely removed from the routing guides on the base frame. base frame...

  • Page 43: Replacing The Base Frame

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the display cable and the I/O-board cable through the slots on the base frame.

  • Page 44: Removing The Coin-Cell Battery

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is recommended that you note the BIOS settings before removing the coin-cell battery.

  • Page 45: Procedure

    Procedure Disconnect the coin-cell battery cable from the system board. coin-cell battery coin-cell battery cable Peel off the coin-cell battery from the system board. Lift the coin-cell battery, along with its cable, off the system board.

  • Page 46: Replacing The Coin-Cell Battery

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Adhere the coin-cell battery to the system board. Connect the coin-cell battery cable to the system board.

  • Page 47: Removing The Heat Sink

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it.

  • Page 48: Procedure

    Procedure In sequential order (as indicated on the heat sink), remove the screws that secure the heat sink to the system board. screws (6) processor heat-sink graphics card heat-sink NOTE: The image shows a heat sink on a laptop shipped with discrete graphics card.

  • Page 49: Replacing The Heat Sink

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. NOTE: The original thermal grease can be reused if the original system board and fan are reinstalled together.

  • Page 50: Removing The I/O Board

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 51 Lift the I/O board off the palm-rest assembly. screw I/O board...

  • Page 52: Replacing The I/O Board

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the screw hole on the I/O board with the screw hole on the palm- rest assembly.

  • Page 53: Removing The Speakers

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 54 Lift the speakers, along with the speaker cable, off the palm-rest assembly. speaker cable speakers (2)

  • Page 55: Replacing The Speakers

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the speakers to the alignment posts on the palm rest. Route the speaker cable through the routing guides on the palm-rest assembly.

  • Page 56: Removing The Status-Light Board

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 57 Lift the status-light board, along with the cable, off the palm rest. screw status-light board...

  • Page 58: Replacing The Status-Light Board

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the screw hole on the status-light board with the screw hole on the palm rest.

  • Page 59: Removing The Power-Adapter Port

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 60 Pry the power-adapter port out of the slot on the palm rest. power-adapter port cable power-adapter port...

  • Page 61: Replacing The Power-Adapter Port

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the power-adapter port into the slot in the palm-rest assembly. Connect the power-adapter port cable to the system board.

  • Page 62: Removing The System Board

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the System Setup after you replace the system board.
  • Page 63 Peel off the antenna cable from the system board. power-adapter port cable antenna cable speaker cable hard-drive cable Remove the screws that secure the system board to the palm-rest assembly. Starting from the inner edge, gently lift the system board and release the ports from the slots on the palm-rest assembly.
  • Page 64 Lift the system board off the palm-rest assembly. screws (2) system board...

  • Page 65: Replacing The System Board

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the System Setup after you replace the system board.

  • Page 66: Post-Requisites

    Route the antenna cable, avoiding the edge of the palm rest and the chip, and adhere it to the system board. CAUTION: To avoid damaging your computer, route the antenna cable away from the edge of the palm rest and the chip. palm rest antenna cable chip...

  • Page 67: Removing The Display Assembly

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.
  • Page 68 Remove the screws that secure the display hinges to the palm-rest assembly. screws (3) display hinges (2) Rotate the palm-rest assembly upward.
  • Page 69 Slide out and remove the palm-rest assembly off the display hinges. palm-rest assembly display assembly display assembly...

  • Page 70: Replacing The Display Assembly

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the hinge covers on the palm-rest assembly under the display hinges and then place the palm-rest assembly on the display assembly.

  • Page 71: Post-Requisites

    Route the antenna cable, avoiding the edge of the palm rest and the chip, and adhere it to the system board. CAUTION: To avoid damaging your computer, route the antenna cable away from the edge of the palm rest and the chip. palm rest antenna cable chip...

  • Page 72: Removing The Palm Rest

    Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites Remove the base cover. Remove the battery.

  • Page 73: Procedure

    Procedure Remove the screws that secure the system board to the palm rest. screws (2) system board...
  • Page 74 Lift the system board from the inner edge and release the ports from the slots on the palm rest . screws (2) system board palm rest...

  • Page 75: Replacing The Palm Rest

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the headset port into the slot on the palm rest and align the screw holes on the system board with the screw holes on the palm-rest assembly.

  • Page 76: Removing The Display Bezel

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites NOTE: These instructions are applicable only for laptops with a non- touchscreen display.

  • Page 77: Procedure

    Procedure Using your fingertips, gently pry up the inner edges of the display bezel. display bezel Lift the display bezel off the display assembly.

  • Page 78: Replacing The Display Bezel

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Align the display bezel with the display back-cover and gently snap the display bezel into place.

  • Page 79: Removing The Display Panel

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites NOTE: These instructions are applicable only for laptops with a non- touchscreen display.
  • Page 80 Lift the display panel slightly off the display back-cover, rotate it, and place it face down on a clean surface. screws (4) display panel Disconnect the display cable from the display panel. display cable...

  • Page 81: Replacing The Display Panel

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Connect the display cable to the display panel. Place the display panel on the display back-cover and align the screw holes on the display panel with the screw holes on the display back- cover.

  • Page 82: Removing The Display Brackets

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites NOTE: These instructions are applicable only for laptops with a non- touchscreen display.

  • Page 83: Procedure

    Procedure Remove the screws that secure the display brackets to the display back- cover. display brackets (2) screws (10) Rotate the brackets from the inner edge to release them from the display back-cover. Lift the display brackets off the display back-cover.

  • Page 84: Replacing The Display Brackets

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Slide the brackets under the tabs on the display back-cover. Align the screw holes on the display brackets with the screw holes on the display back-cover.

  • Page 85: Removing The Camera

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites NOTE: These instructions are applicable only for laptops with a non- touchscreen display.
  • Page 86 Disconnect the camera cable from the camera. plastic scribe camera camera cable...

  • Page 87: Replacing The Camera

    After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Connect the camera cable to the camera. Align the camera to the alignment posts on the display back-cover.

  • Page 88: Removing The Display Back-Cover And Antenna Assembly

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Prerequisites NOTE: These instruction are applicable only to laptops with a non- touchscreen display.
  • Page 89 camera cable display cable...

  • Page 90: Replacing The Display Back-Cover And Antenna Assembly

    Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure Route the display cable and camera cable through the routing guides on the display back-cover.

  • Page 91: Flashing The Bios

    You may need to flash (update) the BIOS when an update is available or when you replace the system board. To flash the BIOS: Turn on the computer. Go to dell.com/support. If you have your computer's Service Tag, type your computer's Service Tag and click Submit.

  • Page 92: Getting Help And Contacting Dell

    Getting Help and Contacting Dell Self-Help Resources You can get information and help on Dell products and services using these online self-help resources: Self-Help Information Self-Help Options Windows 8.1 — Open the Search Accessing Windows Help charm, type Help and Support in the search box and press Enter.
  • Page 93 NOTE: If you do not have an active internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

This manual is also suitable for:

Inspiron 5545

Table of Contents