free stats
NEC IE-78K0-NS-P04 Preliminary User's Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Computer Hardware
  5. IE-78K0-NS-P04
  6. Preliminary user's manual
NEC IE-78K0-NS-P04 Preliminary User's Manual

NEC IE-78K0-NS-P04 Preliminary User's Manual

Emulation board and probe board
Hide thumbs Also See for IE-78K0-NS-P04:
Table of Contents

Advertisement

Quick Links

Download this manual
Preliminary User's Manual
IE-78K0-NS-P04
IE-1615-NS-EM4
Emulation Board and Probe Board
for IE-78K0-NS-A
Target device
µPD1615A Subseries
Document No. U14617EE2V0UM00
Date Published January 2001
© NEC Corporation 2001

Advertisement

Table of Contents
loading

Related Manuals for NEC IE-78K0-NS-P04

Summary of Contents for NEC IE-78K0-NS-P04

  • Page 1 Preliminary User’s Manual IE-78K0-NS-P04 IE-1615-NS-EM4 Emulation Board and Probe Board for IE-78K0-NS-A Target device µPD1615A Subseries Document No. U14617EE2V0UM00 Date Published January 2001 © NEC Corporation 2001...
  • Page 2 IE-78K0-NS-P04, IE-1615-NS-EM4 This equipment complies with the EMC protection requirements. Warning This is a ´Class A´ (EN 55022: 1994) equipment. This equipment can cause radio frequency noise when used in the residential area. In such cases, the user/operator of the equipment may be required to take appropriate countermeasures under his responsibility.
  • Page 3 The information in this document is current as of 15.01.2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC’s data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country.
  • Page 4 Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: Device availability •...

  • Page 5: Introduction

    8-bit single-chip microcontrollers. • µPD1615A Subseries Target Readers This manual is intended for engineers who will use the IE-78K0-NS-P04 with the IE-78K0-NS-A to perform system debugging. Engineers who use this manual are expected to be thoroughly familiar with the target device’s functions and use methods and to be knowledgeable about...
  • Page 6 W hen defined narrowly, it includes only the hardware. This refers to the combination of the IE-78K0-NS-A, IE system the IE-78K0-NS-P04 and the IE-1615-NS-EM4. Conventions Data significance weight : Higher digits on the left and lower digits on the right Note : Footnote for item marked with Note in the text.

  • Page 7: Table Of Contents

    Chapter 1 General ............................11 1.1 System Configuration ..........................12 1.2 Hardware Configuration ..........................14 1.3 Basic Specifications ..........................15 1.4 Notes on Use of IE-78K0-NS-P04 and IE-1615-NS-EM4 ................. 16 Chapter 2 Part Names ..........................17 2.1 Package Components ..........................17 2.2 Parts of the IE-78K0-NS-P04 Emulation Board ..................18 2.3 Parts of the IE-1615-NS-EM4 Probe Board .....................19...
  • Page 8 List of Figures Figure 1-1: System Configuration ......................12 Figure 1-2: Basic Hardware Configuration ....................14 Figure 2-1: IE-78K0-NS-P04 Emulation Board External View and Part Names ........18 Figure 2-2: IE-1615-NS-EM4 Probe Board External View ................19 Figure 3-1: IE-78K0-NS-A inside .........................22 Figure 3-2: Main Board (G-780009) Jumper Positioning ................23 Figure 3-3: Emulation Board (IE-78K0-NS-P04) Jumper Positioning ............25...
  • Page 9 Table 3-18: Main System Clock Settings ....................34 Table 3-19: Subsystem Clock Settings .......................40 Table 3-20: Jumper Settings on IE-78K0-NS-A ...................47 Table 3-21: Jumper Settings on IE-78K0-NS-P04 ..................47 Table 3-22: Jumper Settings on IE-1615-NS-EM4 ..................47 Table A-1: Connectors on IE-78K0-NS-P04 Board ..................61 Table C-1: Connector CN11 to Emulation Probe ..................65...
  • Page 10 IE-78K0-NS-P04, IE-1615-NS-EM4 [MEMO]...

  • Page 11: Chapter 1 General

    IE-78K0-NS-P04, IE-1615-NS-EM4 Chapter 1 General The IE-78K0-NS-P04 and the IE-1615-NS-EM4 are development tools for efficient debugging of hardware or software when using one of the following target devices that belong to the 78K/0 Series of 8-bit single- chip microcontrollers. This chapter describes the emulation board’s and probe board's system configuration and basic specifi- cations.

  • Page 12: System Configuration

    IE-78K0-NS-P04, IE-1615-NS-EM4 1.1 System Configuration Figure 1-1 illustrates the IE-78K0-NS-P04 and the IE-1615-NS-EM4's system configuration. Figure 1-1: System Configuration Debugger Device file ID78K0-NS Control software Host machine PC-9800 Series or IBM PC/AT™ compatibles Interface board Interface board Interface board IE-70000-PCI-IF-A...
  • Page 13 IE-78K0-NS-P04, IE-1615-NS-EM4 Note: The packages, emulation probes, and conversion sockets/conversion adapters are listed below. Conversion Socket/ Package Emulation Probe Conversion Adapter NQPACK080SB 80-pin plastic QFP YQPACK080SB NP-80GC-TQ (GC - type) HQPACK080SB YQSOCKET080SBF The NP-80GC-TQ is a product of Naito Densei Machidaseisakusho Co., Ltd.

  • Page 14: Hardware Configuration

    IE-78K0-NS-P04, IE-1615-NS-EM4 1.2 Hardware Configuration Figure 1-2 shows the IE-78K0-NS-P04/IE-1615-NS-EM4’s position in the basic hardware configuration. Figure 1-2: Basic Hardware Configuration Dedicated bus interface IE system IE-78K0-NS-P04 IE-78K0-NS-A IE-1615-NS-EM4 Emulation board Host machine Interface board 78K0 Emulator (This product) Interface card...

  • Page 15: Basic Specifications

    IE-78K0-NS-P04, IE-1615-NS-EM4 1.3 Basic Specifications The IE-78K0-NS-P04 and the IE-1615-NS-EM4’s basic specifications are listed in Table 1-1. Table 1-1: Basic Specifications Parameter Description µPD1615A Subseries Target device Main system clock: 8.38 MHz System clock Subsystem clock: typically 32.768 KHz External: Pulse input...

  • Page 16: Notes On Use Of Ie-78K0-Ns-P04 And Ie-1615-Ns-Em4

    IE-78K0-NS-A and the target device, or changing switch settings, etc. (2) When carrying out target device emulation using the IE-78K0-NS-P04/IE-1615-NS-EM4 in conjunction with the IE-78K0-NS-A, there are certain differences from the operation of the actual device (see Differences from Target Device).

  • Page 17: Chapter 2 Part Names

    The packaging boxes of the IE-78K0-NS-P04 and the IE-1615-NS-EM4 contain the following items: 2.1 Package Components IE-78K0-NS-P04 Components The IE-78K0-NS-P04 comprises the following components. Please check that all these items are included in the package. (1) IE-78K0-NS-P04 (2) Parts holder (with cover)

  • Page 18: Parts Of The Ie-78K0-Ns-P04 Emulation Board

    IE-78K0-NS-P04, IE-1615-NS-EM4 2.2 Parts of the IE-78K0-NS-P04 Emulation Board Figure 2-1: IE-78K0-NS-P04 Emulation Board External View and Part Names Main system clock (fix 8.00 MHz) IE-78K0-NS-P04 Emulation Board Subsystem clock Main system clock (user defined) (user defined)

  • Page 19: Parts Of The Ie-1615-Ns-Em4 Probe Board

    IE-78K0-NS-P04, IE-1615-NS-EM4 2.3 Parts of the IE-1615-NS-EM4 Probe Board Figure 2-2: IE-1615-NS-EM4 Probe Board External View IE-1615-NS-EM4 Probe-Board SS-71101-1 Ver.1. MADE IN GERMANY ANTI STATIC...

  • Page 20: Table 2-1: Names Of Ie-78K0-Ns-P04 Parts

    IE-78K0-NS-P04, IE-1615-NS-EM4 Table 2-1: Names of IE-78K0-NS-P04 Parts Description Description Name Name (IE-78K0-NS-P04 Emulation Board) (IE-1615-NS-EM4 Probe Board) Emulation board connectors Emulator connections CN10 CN11 Probe connector Probe board connectors VAN in/out buffer select VAN in/out buffer select CN10 VAN in/out buffer select...

  • Page 21: Chapter 3 Installation

    IE-78K0-NS-P04, IE-1615-NS-EM4 Chapter 3 Installation This chapter describes the method for the connection of the IE-78K0-NS-P04, the IE-1615-NS-EM4 and the emulation probe. - Installation of the IE-78K0-NS-P04 Emulation Board - Installation of the IE-1615-NS-EM4 Probe Board - Installation of the emulation probe...

  • Page 22: Installation Procedure

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.1 Installation Procedure <1> Remove the 4 screws at the sides of the IE-78K0-NS-A and open the top of the cover. <2> Remove the screws on the option board (G-78K0H) and remove the option board. Figure 3-1: IE-78K0-NS-A inside...

  • Page 23: Figure 3-2: Main Board (G-780009) Jumper Positioning

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 3-2: Main Board (G-780009) Jumper Positioning Jumper JP2 Table 3-1: Flash ROM Mode Jumper Position Function (1-2) Internal use (2-3) Internal use (default) Jumper JP3 Table 3-2: Internal Mode 1 Jumper Position Function (1-2) Internal use (default)

  • Page 24: Table 3-3: Internal Mode 2

    Jumper JP8 Table 3-6: Sub Clock Selection Jumper Position Function (1-2) On EM board (default) (3-4) On target system (5-6) On main board <4> Connect the option board (G-78K0H) to the main board (G-780009). <5> Setup of the emulation board (IE-78K0-NS-P04)

  • Page 25: Figure 3-3: Emulation Board (Ie-78K0-Ns-P04) Jumper Positioning

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 3-3: Emulation Board (IE-78K0-NS-P04) Jumper Positioning Jumper JP1 Table 3-7: Reference Voltage Pin of AD-Converter Jumper Position Function Open Target Connected to target selected reference voltage (default) Close Reference voltage Remark: Close jumper JP1 when the AD-converter is not used.

  • Page 26: Table 3-9: Jtag Mode

    IE-78K0-NS-P04, IE-1615-NS-EM4 Jumper JP3 Table 3-9: JTAG Mode Jumper Position JTAG Function Open Pull-up Reserved (Internal use) (default) Close Reserved (Internal use) Jumper JP4 Table 3-10: JTAG Mode Jumper Position JTAG Function Open Pull-up Reserved (Internal use) Close Reserved (Internal use) (default)

  • Page 27: Table 3-14: Reference Voltage Setting

    Not used Remark: Not used LED's are reserved for future functions. <6> Connect the emulation board (IE-78K0-NS-P04) to the option board (G-78K0H). <7> When user clock as main clock or sub clock is used, the main system clock or subsystem clock...

  • Page 28: Figure 3-4: Probe Board (Ie-1615-Ns-Em4) Jumper Positioning

    IE-78K0-NS-P04, IE-1615-NS-EM4 <8> Setup of the probe board (IE-1615-NS-EM4) Figure 3-4: Probe Board (IE-1615-NS-EM4) Jumper Positioning Jumper JP1 to JP4 Table 3-17: VAN serial in/out Jumper Position Function (1 - 2) Pin Emulator Original Buffer Type (default) (2 - 3)

  • Page 29: Figure 3-5: Connection Of Boards

    IE-78K0-NS-P04, IE-1615-NS-EM4 <9> Connect the probe board (IE-1615-NS-EM4) to the emulation board (IE-78K0-NS-P04) <10> Remove the top and the bottom plate by removing the screws <11> Connect the probe (NP-80GC-TQ) to CN11 of the probe board (IE-1615-NS-EM4). <12> Connect the cover and tighten the 4 screws.

  • Page 30: Clock Settings

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.2 Clock Settings 3.2.1 Overview of clock settings Main system clock / Subsystem clock Select from (1) to (3) below as the main system clock and subsystem clock to be used during debugging. (1) Clock that is already mounted on emulation board...

  • Page 31: Main System Clock Selections

    (2) Clock that is mounted by user The user is able to mount any clock supported by the set specifications on the IE-78K0-NS-P04 Emulation Board. First mount the oscillator on the parts holder, then attach the parts board to the IE-78K0-NS-P04 Emulation Board.

  • Page 32: Subsystem Clock

    IE-78K0-NS-P04, IE-1615-NS-EM4 (3) External clock An external clock connected to the target system can be used via the emulation probe. Figure 3-9: When Using an External Clock IE-78K0-NS-A Target system Emulation probe Clock generator (to be used) Remark: The clock supplied by the target system’s clock generator (encircled in the figure) is used.

  • Page 33: Figure 3-11: When Using Clock Mounted On The Emulation Board

    (2) Clock mounted by user on the emulation board A clock that matches the specifications set by the user can be mounted on the IE-78K0-NS-P04 Emulation Board. The resonator or oscillator to be used is mounted on a parts holder and that parts holder is installed on the IE-78K0-NS-P04 Emulation Board.

  • Page 34: Main System Clock Settings

    (1) When using clock that is already mounted on emulation board When the IE-78K0-NS-P04 Emulation Board is shipped, an 8.0000-MHz crystal resonator is already mounted in the IE-78K0-NS-P04 Emulation Board X4 socket. When using the factory-set mode settings, there is no need to make any other hardware settings.

  • Page 35: Figure 3-13: Connections On Parts Board (When Using Main System Or User-Mounted Clock)

    “Internal” in the area (Clock) for selecting the CPU’s clock source (this selects the emulator’s internal clock). (a) When using a ceramic oscillator or crystal resonator - Items to be prepared - Parts holder (supplied with IE-78K0-NS-P04) · Capacitor CA - Ceramic oscillator or crystal resonator · Capacitor CB - Resistor Rx ·...

  • Page 36: Figure 3-14: Ie-78K0-Ns-A Side (Emulation Device)

    IE-78K0-NS-P04, IE-1615-NS-EM4 <2> Prepare the IE-78K0-NS-P04 Emulation Board. <3> Remove the parts holder inserted in the socket (marked "X2") on the IE-78K0-NS-P04 Emulation Board. <4> Connect the parts holder (from <1> above) to the socket (X2) from which the part holder was removed.

  • Page 37: Figure 3-15: Crystal Oscillator (When Using Main System Clock Or User-Mounted Clock)

    <Steps> <1> Prepare the IE-78K0-NS-P04 Emulation Board. <2> Remove the parts holder inserted in the socket (marked “X2”) on the IE-78K0-NS-P04 Emulation Board. <3> Connect the parts board (from <2> above) to the socket (X2) from which the parts holder was removed.

  • Page 38: Figure 3-17: Ie-78K0-Ns-A Side (Emulation Device)

    IE-78K0-NS-P04, IE-1615-NS-EM4 The above steps configure a circuit and enable clock output to be supplied from the mounted oscillator to the emulation device. Figure 3-17: IE-78K0-NS-A side (Emulation Device) IE-78K0-NS-A side (Emulation device) Crystal oscillator VHC157 (3) When using an external clock No hardware settings are required for this situation.

  • Page 39: Examples Of Main System Clock Setting

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.2.5 Examples of Main System Clock Setting (1) Standard Clock 8.0000 MHz offered by the IE-78K0-NS-P04 Emulation Board Main Board: JP6 - (3-4) JP7 - (1-2) Emulation Board: X2 with shortcut between 6 - 8 ID78K0-NS: Internal (2) Clock mounted by the User on the IE-78K0-NS-P04 Emulation Board...

  • Page 40: Subsystem Clock

    (1) When using clock that is already mounted on main board When the IE-78K0-NS-P04 is shipped, there is no 32.768 KHz crystal on the board. The parts holder on X1 is shortened between 6 and 8. Short pins 5 and 6 of JP8 of the IE-78K0-NS-A's main board to use the 32.768 KHz crystal of the emulator.

  • Page 41: Figure 3-18: Connections On Parts Board (When Using Subsystem Clock Or User-Mounted Clock)

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 3-18: Connections on Parts Board (When Using Subsystem Clock or User-Mounted Clock) Parts holder (X1 of IE-78K0-NS-P04 Emulation Board) Pin No. Connection 2-13 Capacitor CB 3-12 Capacitor CA 4-11 Ceramic oscillator or crystal resonator 5-10 Resistor Rx...

  • Page 42: Figure 3-19: Ie-78K0-Ns-A Side

    IE-78K0-NS-P04, IE-1615-NS-EM4 <2> Prepare the IE-78K0-NS-P04 Emulation Board. <3> Remove the crystal oscillator that is mounted in the IE-78K0-NS-P04 Emulation Board’s socket (the socket marked as “X1”). <4> Connect the parts board (from <1> above) to the socket (X1) from which the crystal oscillator was removed (see <3>...

  • Page 43: Figure 3-20: Crystal Oscillator (When Using Subsystem Clock Or User-Mounted Clock)

    <Steps> <1> Prepare the IE-78K0-NS-P04 Emulation Board. <2> Remove the crystal oscillator that is mounted in the IE-78K0-NS-P04 Emulation Board’s socket (the socket marked as “X1”). <3> Connect the parts board (from <2> above) to the socket (X1) from which the crystal oscillator was removed.

  • Page 44: Figure 3-21: Ie-78K0-Ns-A Side

    IE-78K0-NS-P04, IE-1615-NS-EM4 The above steps configure a circuit and enable clock output to be supplied from the mounted oscilla- tor to the emulation device. Figure 3-21: IE-78K0-NS-A side Parts holder CLK IN Crystal oscillator Target system (3) When using an external clock Short pins 3 and 4 on the IE-78K0-NS-A’s jumper (JP8).

  • Page 45: Examples Of Subsystem Clock Setting

    Main Board: JP8 - (5-6) Emulation Board: X1 with shortcut between 6 - 8 ID78K0-NS: don't care (2) Clock mounted by the User on the IE-78K0-NS-P04 Emulation Board Main Board: JP8 - (1-2) Emulation Board: X1 with oscillation circuit ID78K0-NS:...

  • Page 46: Lcd-C/D Resistor Network

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.4 LCD-C/D Resistor Network At the device the LCD split resistors have to be connected externally. In this case there is no LCD- C/D resistor network in the emulation necessary.

  • Page 47: Jumper Settings

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.5 Jumper Settings When using the IE-78K0-NS-P04 and the IE-1615-NS-EM4, set the jumpers as shown below. Table 3-20: Jumper Settings on IE-78K0-NS-A Short Table 3-21: Jumper Settings on IE-78K0-NS-P04 Open Open Open Closed Open Open Table 3-22: Jumper Settings on IE-1615-NS-EM4...

  • Page 48: External Trigger

    IE-78K0-NS-P04, IE-1615-NS-EM4 3.6 External Trigger To set up an external trigger, connect the IE-1615-NS-EM4 Probe Board’s check pin, EXTOUT, and EXTIN as shown below. See the in-circuit emulator (IE-78K0-NS-A) User’s Manual for description of related use methods and pin characteristics.

  • Page 49: Chapter 4 Differences Among Target Devices And Target Interface Circuits

    This chapter describes differences between the target device and the IE-78K0-NS-P04 / IE-1615- NS-EM4 target interface circuit. Although the target device is a CMOS circuit, the IE-78K0-NS-P04 and the IE-1615-NS-EM4’s target interface circuit consists of an emulation chip, TTL, CMOS-IC, and other components.

  • Page 50: Input/Output Signals

    IE-78K0-NS-P04, IE-1615-NS-EM4 4.1 Input/Output Signals <1> Signals which are input or output from the gate array (µPD7880, µPD7881). <2> Signals which are input or output from the gate array (µPD7883). <3> Signals wich are input or output from the µPD780009 emulation CPU <4>...

  • Page 51: Figure 4-1: Equivalent Circuit 1 From Emulation Circuit

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 4-1: Equivalent Circuit 1 from Emulation Circuit Probe IE-78K0-NS-A side P00 to P02, P06, P07 P10/ANI0 to P17/ANI7 TxVAN Rx0VAN, Rx1VAN, Rx2VAN Emulation Gate Array P40 to P46 P80 to P87 P90 to P97 P100 to P107...

  • Page 52: Figure 4-2: Equivalent Circuit 2 From Emulation Circuit

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 4-2: Equivalent Circuit 2 from Emulation Circuit IE-78K0-NS-A side Probe 4,7 KΩ 100 Ω RESET µPD780009 Emulation CPU 25J278 (P-ch MOS-FET) P-ch FPGA 25K1697 (N-ch MOS-FET) N-ch Internal circuit 100 Ω µPC393 0, V 0,1 µF 1 MΩ...

  • Page 53: Figure 4-3: Equivalent Circuit 3 From Emulation Circuit

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure 4-3: Equivalent Circuit 3 from Emulation Circuit Probe IE-78K0-NS-A side Open Open /Test Open...

  • Page 54: Differences In Port Functions

    The above points must be taken into consideration when designing the target system. Caution: When the IE-78K0-NS-A, the IE-78K0-NS-P04 and the IE-1615-NS-EM4 are connected to the target system, 4.0 to 5.5 V must be supplied as the target system power supply (V...

  • Page 55: Chapter 5 Restrictions

    IE-78K0-NS-P04, IE-1615-NS-EM4 Chapter 5 Restrictions 1. Starting up the IE system without target board connected makes initial values for ports-indefinite. 2. The RESET value of the IF-REG (F801h) register is not correct. The reset value will be correct after the clock of the VANUDL is enabled.
  • Page 56 IE-78K0-NS-P04, IE-1615-NS-EM4 (1) Emulation Board (IE-78K0-NS-P04) of µ1615A Subseries (a) LCDM - LCD Display Mode Register Symbol LCDM LDON LCDM6 LCDM5 LCDM4 LCDM2 LCDM1 LCDM0 LDON Enables/disables LCD display Display off Display on LCDM6 LCDM5 LCDM4 Select LCD clock fx/2...
  • Page 57 IE-78K0-NS-P04, IE-1615-NS-EM4 (b) LCDC - LCD Control Register Symbol LCDC LIPS LIPS LCD Driving Power Supply selection Does not supply power to LCD Supplies power to LCD from V The bit 7 has to be set to 1 and the bits 6 to 4 have to be set to 0.
  • Page 58 IE-78K0-NS-P04, IE-1615-NS-EM4 (2) Device of µ1615A Subseries (a) LCDM - LCD Display Mode Register Symbol LCDM LCDON LIPS LCDM2 LCDM1 LCDM0 LCDON Enables/disables LCD display Display off Display on LIPS LCD Driving Power Supply selection Does not supply power to LCD...
  • Page 59 IE-78K0-NS-P04, IE-1615-NS-EM4 (b) LCDC - LCD Control Register Symbol LCDC LCDC3 LCDC2 LCDC3 LCDC2 Select LCD clock fx/2 fx/2 fx/2 fx/2...
  • Page 60 IE-78K0-NS-P04, IE-1615-NS-EM4 [MEMO]...

  • Page 61: Appendix A Ie-78K0-Ns-P04 And Ie-1615-Ns-Em4 Product Specifications

    IE-78K0-NS-P04, IE-1615-NS-EM4 Appendix A IE-78K0-NS-P04 and IE-1615-NS-EM4 Product Specifications Product name : IE-78K0-NS-P04, IE-1615-NS-EM4 Operating temperature : 0 to 50 °C Humidity : 10 to 80% RH (no condensation) Storage temperature : –15 to +60 °C Power supply : Power supply capacity : DC 200 mA (Max.) 1.0 W +5 V...
  • Page 62 IE-78K0-NS-P04, IE-1615-NS-EM4 [Memo]...

  • Page 63: Appendix B Conversion Socket Adapter Package Drawings And Recommended

    IE-78K0-NS-P04, IE-1615-NS-EM4 Appendix B Conversion Socket Adapter Package Drawings and recommended Board Mounting Pattern The following sockets and socket adapters are available for the connection of the probe or device: Soldering socket NQPACK080SB Probe adapter YQPACK080SB High adapter YQSOCKET080SBF Device Lid...

  • Page 64: Figure B-1: 80Gc Package Drawings (Reference)

    IE-78K0-NS-P04, IE-1615-NS-EM4 Figure B-1: 80GC Package Drawings (Reference) Pad drawing (in mm) ITEM MILLIMETERS INCHES 19.7 0.776 15.0 0.591 +0.001 +0.003 0.65 ± 0.02 x 19 = 12.35 ± 0.05 0.026 x 0.748 = 0.486 –0.002 –0.002 +0.001 +0.003 0.65 ± 0.02 x 19 = 12.35 ± 0.05 0.026...

  • Page 65: Appendix C Pin Correspondence Tables Of Emulation Probe

    IE-78K0-NS-P04, IE-1615-NS-EM4 Appendix C Pin Correspondence Tables of Emulation Probe Table C-1: Connector CN11 to Emulation Probe (1/2) Real-chip Pin Function Real-chip Pin Function Pin 42 P83/S36 Pin 41 P82/S37 Pin 20 Rx2VAN Pin 19 Rx1VAN Pin 44 P85/S34 Pin 43...
  • Page 66 IE-78K0-NS-P04, IE-1615-NS-EM4 Table C-1: Connector CN11 to Emulation Probe (2/2) Real-chip Pin Function Real-chip Pin Function Pin 58 P103/S20 Pin 57 P102/S21 Pin 04 Pin 03 P10/ANI0 VREF Pin 60 P105/S18 Pin 59 P104/S19 Pin 02 P11/ANI1 Pin 01 P12/ANI2...
  • Page 67 Facsimile Message Although NEC has taken all possible steps to ensure that the documentation supplied to our customers is complete, bug free and up-to-date, we readily accept that From: errors may occur. Despite all the care and precautions we've taken, you may Name encounter problems in the documentation.

This manual is also suitable for:

Ie-1615-ns-em4

Table of Contents