Table of Contents
Advertisement
2. Replace the 3 screws to secure the touchpad frame to the system.
3. Connect the touchpad cable to the connector in the touchpad frame.
4. Affix the adhesive tape to secure the touchpad frame to the system.
5. Place the touchpad bracket into the slot.
6. Replace the 3 screws to secure the touchpad bracket to the system.
7. Install the:
a.
battery
b.
base cover
c.
microSD card
8. Follow the procedure in
Keyboard lattice and Keyboard
Removing keyboard
Steps
1. Follow the procedure in
2. Remove the:
a.
microSD card
b.
base cover
c.
battery
3. To remove the keyboard:
a. Release the latch and, disconnect the keyboard cable from the connector on the system board [1].
b. Use a plastic scribe to release the keyboard from the two release holes in the system [2].
NOTE:
The two release holes for the keyboard are indicated by the "KB" labeling.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23
Advertisement
Table of Contents
