Safety information General Safety guidelines For tips to help you use your computer safely, go to: http://www.lenovo.com/safety Before installing this product, read the Safety Information. DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached.
Chapter 1. Getting started This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: •...
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Adjusting the tilt and swivel The illustration below shows the tile and swivel range of the monitor. For more information, see "Positioning your monitor"on page 2-1.
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information located on page iii before carrying out this procedure. Power off your computer and all attached devices, and unplug the computer power cord. Connect the cables according to below icon indication.
Page 9
Connect one end of the HDMI cable to the monitor HDMI connector and the other end to the computer if it has one HDMI output connector. Connect the USB cable to the upstream USB port of the back of the monitor and the other end to an appropriate USB port on your computer.
Page 10
Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used.
Page 11
Power on the monitor and the computer. 10. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. 11. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 mintues.This is not required for normal operation.
For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
• Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. Brightness/Contrast Brightness Exit Left To use the controls: Press to open the main OSD menu. to move among the icons. Select an icon and press function.
Page 16
Table 2-2. OSD functions OSD Icon on Main Menu Submenu Brightness Brightness/ Contrast Contrast Horizontal Position Image Position Vertical Position Automatic Image Setup Manual Color Image Properties Input video signal Controls and Adjustments Description Adjusts overall brightness Adjusts difference between light and dark areas Moves the image left or right.
Page 17
Table 2-2. OSD functions OSD Icon on Main Menu Submenu Scaling NOVO VISION Information Options Menu Language Menu Position Factory default Accessibility MUTE Exit Controls and Adjustments Description • Selects type of scaled image • Original AR:same aspect ratio with input signal •...
This is normal and the image can be readjusted using automatic image setup and the image controls. Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free. Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system;...
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Page 21
Step 3: Revolve the monitor hinge cover and stand, .refer to "Detaching the monitor hinge cover and stand" insure that it is parallel to top of the back side. Step 4: Attatch the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model L2362pwA Dimensions Stand Base VESA mount Image Power input Power consumption Note: Power consumption figures are for the monitor and the power supply...
Page 23
Table 3-1. Monitor specifications for type-model L2362pwA Video input Input Signal Horizontal addressability Vertical addressability Clock frequency Communications VESA DDC Supported Display Modes Horizontal frequency Vertical frequency Native Resolution Temperature Operating Storage Shipping Humidity Operating Storage Shipping HDMI 1920 pixels (max) 1080 lines (max) 165 MHz 30 kHz - 83 kHz...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem The words "Out...
Table 3-2. Troubleshooting Problem Possible cause The power The video signal cable indicator is is loose or orange, but there disconnected from the is no image. system or monitor. The monitor brightness and contrast are at the lowest setting. One or more of This is a characteristic the pixels appear of the LCD...
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRT, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Page 30
Country or Region Telephone Number Belgium 80076524(French, Dutch) Bolivia 800-100-764(Spanish) Appendix A.
Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Appendix C. Camera Description Product Feature System Request Certification Compliance Operation Temperature Power Consumption Lead Free Support * Using CMOS sensor, 0.35M pixels * Software Interpolation to 2.0M * Analog Microphone * Auto White Balance * Provide 640x480 (max) resolution when capture * Provide AVI format while recording video * 30 frame per second provide smooth image * Flexible to change the size of preview window...
Appendix D. USB Hub description This section gives you information about the USB ports that are available on your monitor. Note: This monitor supports High-Speed Certified USB 2.0 interface Transfer speed High speed Full speed Low speed USB Upstream Connector USB Downstream Connector Data Rate Power Consumption...