Table of Contents
Advertisement
Figure 28. Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
Next steps
1
Replace a 3.5-inch drive
2
Follow the procedure listed in
Removing a cabled drive
Prerequisites
1
Follow the safety guidelines listed in the
2
Follow the procedure listed in the
CAUTION:
Mixing drives from previous generations of PowerEdge servers is not supported.
Steps
1
Disconnect the power and data cable connector that is connected to the drive.
2
Press the release button, and slide the drive out of the drive slot.
58
Installing and removing system components
carrier.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Advertisement
Table of Contents
