Table of Contents
Advertisement
•
• If the measures above do not resolve the problem, make sure the DHCP of the wireless router is enabled.
For details, see the instruction manual supplied with the wireless router or contact the manufacturer.
Check location of wireless router.
Check4
Make sure the printer is not placed too far away from the wireless router.
The printer can be up 50 m (164 ft.) from the wireless router indoors if unobstructed. Make sure the printer is
close enough to the wireless router to be used.
Place the printer and wireless router where there are no obstacles between them. Wireless communication
between different rooms or floors is generally poor. Wireless communication can be impeded by building
materials containing metal or concrete. If the printer cannot communicate with the computer over a Wi-Fi due
to a wall, place the printer and the computer in the same room.
In addition, if a device like a microwave oven that emits radio waves of the same frequency bandwidth as a
wireless router is nearby, it may cause interference. Place the wireless router as far away from interference
sources as possible.
Step2 : Solve Problems, Using IJ Network Device Setup Utility
Diagnose and repair the network connections using IJ Network Device Setup Utility.
Download IJ Network Device Setup Utility from the below page, and install it on your computer.
Checking Printer Connection Status Using IJ Network Device Setup Utility
Refer to below in regard to starting up IJ Network Device Setup Utility.
• For Windows:
•
Starting Up IJ Network Device Setup Utility
•
• For macOS:
Starting Up IJ Network Device Setup Utility
Step3 : Check Other Network-related Items
Make sure Enable bidirectional support is selected in Ports sheet of Printer
Check1
properties dialog box. (Windows)
If not, select it to enable the bidirectional support.
Make sure security software's firewall is off.
Check2
If your security software's firewall is on, a message may appear warning you that Canon software is attempting to
access the network. If this warning message appears, set security software to always allow access.
If you are using any programs that switch between network environments, check their settings. Some programs
use a firewall by default.
If printer is connected to AirPort Base Station via LAN, make sure you use
Check3
alphanumeric characters for network name (SSID). (macOS)
Solve network troubles manually.
Check4
235
Advertisement
Table of Contents
