Power; Screen; Printing - Canon SELPHY CP Series User Manual
Compact photo printer
Hide thumbs
Also See for SELPHY CP Series:
- User manual (82 pages) ,
- Owner's manual (54 pages) ,
- User manual (72 pages)
Advertisement
Power
Cannot turn on SELPHY
•
Confirm that the power cord is connected and plugged in correctly
•
Hold the <q> button until the startup screen is displayed
•
When using Battery Pack NB-CP2L (sold separately), confirm that the battery pack is
charged and inserted correctly, and that the cable is connected correctly.
Screen
The image display screen is not displayed
•
While the ID Photo Settings screen is displayed, press <k> to display the menu,
press <u><d> to choose [Select & Print], and then press <o>.
(=
12).
(=
13).
(=
32)
Printing
Cannot print
•
Confirm that SELPHY is on
(=
13).
•
Confirm that the paper and ink cassettes are loaded correctly
•
Confirm that the ink sheet is not loose
(=
•
Confirm that you are using paper designed especially for SELPHY
•
Replace the ink cassette and refill the paper cassette as needed
•
Confirm that you are using the correct combination of paper, paper cassette, and ink
cassette
(=
8).
•
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer's interior becomes hot because the rear-side air
vent
(=
5) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
Cannot display or print images on memory cards or USB flash drives
•
Confirm that the memory card is fully inserted in the correct slot, with the label face-
up
(=
14, 15).
•
Confirm that the USB flash drive is fully inserted, right-side up
•
Confirm that the image format is supported
•
Confirm that a memory card requiring the use of an adapter has not been inserted
without its adapter
(=
14).
Cannot print from a camera
•
Confirm that your camera supports PictBridge
•
Confirm that SELPHY and the camera are connected correctly
•
Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
•
Remove any inserted memory cards or USB flash drives.
(=
10).
8).
(=
10).
(=
16).
(=
17).
(=
14).
(=
36).
(=
36).
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
39
Advertisement
