Handling and Maintenance
•
Do not subject the printer to excessive force, which may damage the
printer or cause paper jams.
•
Do not expose the printer to insecticides or other volatile substances.
Additionally, do not store the printer in contact with rubber, vinyl, or plastic
products over extended periods, which may deteriorate the casing.
•
Avoid condensation on the printer, which may happen when moving
the printer from cold to warm environments. Put the printer in a sealed
plastic bag and allow it to adjust to the new temperature before removing
the bag. If condensation forms, allow the printer to dry naturally at room
temperature before using again.
•
When the printer becomes dirty, wipe it with a soft, dry cloth.
•
If the air vent
(=
5) becomes dusty, remove the ink cassette
(=
16) before wiping the dust away, to prevent dust from getting inside
and affecting print quality.
•
Never wipe the printer with solvents, such as benzene or thinner, or
neutral detergent, which may cause deformation or peeling of the
casing.
Trademarks and Licenses
•
Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
•
Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
•
The SDXC logo is a trademark of SD-3C, LLC.
•
All other trademarks are the property of their respective owners.
•
This device incorporates exFAT technology licensed from Microsoft.
•
Portions of the code used in this firmware are based in part on the work
of the Independent JPEG Group.
Disclaimer
•
Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
•
Canon reserves the right to change the contents of this guide at any time
without prior notice.
•
Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
•
The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation of the products.
Cover
Contents
Part Names
Basic Operations
Print Settings
Printing via USB Cable
Troubleshooting
Appendix
46