Page 1 NEC Express Server Express5800 Series Express5800/R120d-1E EXP480A User’s Guide Model Number: R120d-1E: N8100-1954F/1955F/1956F Chapter 1 General Description Chapter 2 Preparations Chapter 3 Setup Chapter 4 Appendix 10.023.01-101.02 March 2013, Scond Edition © NEC Corporation 2013...
Page 2: Documents Provided With This Product
Chapter 2: Convenient Features Useful features and the detail of system BIOS settings, RAID Configuration Utility, and EXPRESSBUILDER Chapter 3: Appendix Error messages and Windows Event Logs Other documents Provides the detail of NEC ESMPRO, Universal RAID Utility, and the other features. Express5800/R120d-1E User’s Guide...
Page 3: Table Of Contents
Contents Contents Documents Provided with This Product ......................... 2 Contents ................................3 Notations Used in This Document ......................... 6 Notations used in the text..........................6 Optical disk drives ............................6 Hard disk drives ............................6 Removable media ............................6 Abbreviations of Operating Systems (Windows) ................... 7 Trademarks ................................
Page 4 Contents 4.7.6 UID LED (ID)........................43 4.7.7 LED on a hard disk drive ....................43 4.7.8 LEDs for LAN connectors ....................44 4.7.9 AC POWER LED (POWER Supply Unit) ................45 Chapter 2 Preparations ............................. 46 Installing Internal Optional Devices ......................47 Safety Precautions...........................
Page 5 Contents Installation and Connection ........................127 Installation............................127 2.1.1 Installing Rack ......................... 127 2.1.2 Installing the server to the rack or removing it from the rack ........... 129 Connection............................. 135 2.2.1 Connecting to a uninterruptible power supply (UPS) ............139 Chapter 3 Setup ..............................
Page 6: Notations Used In This Document
Notations Used in This Document Notations Used in This Document Notations used in the text In addition to safety-related symbols urging caution, 3 other types of notations are used in this document. These notations have the following meanings. Important Indicates critical items that must be followed when handling the server or operating software. If the procedures described are not followed, server failure, data loss, and other serious malfunctions could occur.
Page 7: Abbreviations Of Operating Systems (Windows)
Notations Used in This Document Abbreviations of Operating Systems (Windows) Windows Operating Systems are referred to as follows. Refer to Chapter 1 (1.2 Supported Windows OS) in Installation Guide (Windows) for detailed information. Notations in this document Official names of Windows Windows Server 2008 R2 Standard Windows Server 2008 R2 Windows Server 2008 R2 Enterprise...
Page 8: Trademarks
Trademarks Trademarks EXPRESSSCOPE is registered trademarks of NEC Corporation. Microsoft, Windows, Windows Server, Windows Vista, and MS-DOS are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Intel, Pentium, and Xeon are registered trademarks of Intel Corporation of the United States.
Page 9: Regulatory Notices
Regulatory Notices Regulatory Notices FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 10 Regulatory Notices Turkish RoHS information relevant for Turkish market EEE Yönetmeliğine Uygundur Vietnam RoHS information relevant for Vietnam market Complying with “CIRCULAR,No.30/2011/TT-BCT（Hanoi,August 10 2011）, Temporary regulations on content limit for certain hazardous substances in electrical products” English Declaration of Conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances in Electrical and Electronic Equipment (adopted by Order №1057 of Cabinet of Ministers of Ukraine)
Page 11 Regulatory Notices свинец (Pb) – не превышает 0,1 % веса вещества или в концентрации до 1000 миллионных частей; кадмий (Cd) – не превышает 0,01 % веса вещества или в концентрации до 100 миллионных частей; ртуть (Hg) – не превышает 0,1 % веса вещества или в концентрации до 1000 миллионных частей;...
Page 12: Warnings And Additions To This Document
The contents of this document may change without prior notice. Do not make copies or alter the document content without permission from NEC Corporation. Every effort has been made to ensure the completeness of this document. However, if you have any concerns, or discover errors or omissions, please contact your retailer.
Page 13: Precautions For Use (Be Sure To Read)
Names and Functions of Parts in this document. Safety precautions Follow the instructions in this document for the safe use of the NEC Express server. This User’s Guide describes hazardous parts of the server, possible hazards, and how to avoid them. Server components with possible danger are indicated with a warning label placed on or around them (or, in some cases, by printing the warnings on the server).
Page 14: Symbols Used In This Document And On Warning Labels
Precautions for Use (Be Sure to Read) (A label example used in this User’s Guide) Symbol to draw Description of a warning Term indicating a degree of danger attention WARNING Use only the specified outlet Use a grounded outlet with the specified voltage. Use of an improper power source may cause a fire or a power leak.
Page 15: Safety Notes
Precautions for Use (Be Sure to Read) Safety notes This section provides notes on using the server safely. Read this section carefully to ensure proper and safe use of the server. For symbols, refer to Safety precautions. General WARNING Do not use the server for services where human life may be at stake or high reliability is required. This server is not intended for use in medical, nuclear, aerospace, mass transit or other applications where human life may be at stake or high reliability is required, nor is it intended for use in controlling such applications.
Page 16: Rack Installation
Precautions for Use (Be Sure to Read) Rack installation CAUTION Do not attempt to carry or install the server alone More than two people are required to carry or install the rack. Otherwise, the rack may fall, resulting in personal injury or damage to peripheral devices. In particular, tall racks such as a 44U rack become unstable unless steadied with a stabilizer.
Page 17: Power Supply And Power Cord Use
Precautions for Use (Be Sure to Read) Power supply and power cord use WARNING Do not hold the power plug with a wet hand. Do not disconnect/connect the plug while your hands are wet. Failure to follow this warning may cause an electric shock.
Page 18: Installation, Relocation, Storage, And Connection
Precautions for Use (Be Sure to Read) CAUTION Do not use the attached power cord for any other devices or usage. The power cord that comes with your server is designed aiming to connect with this server and to use with the server, and its safety has been tested.
Page 19: Cleaning And Working With Internal Devices
Use only the specified interface cable. Use only interface cables provided by NEC and locate a proper device and connector before connecting a cable. Using an authorized cable or connecting a cable to an improper destination may cause a short circuit, resulting in a fire.
Page 20: During Operation
Precautions for Use (Be Sure to Read) CAUTION High temperature Components including internal Hard Disk Drives in the server are extremely hot just after the server is turned off. Allow the surface to cool before installing/removing. Secure cables or cards in place Be sure to secure the power cord, interface cables, and cards in place.
Page 21: Warning Labels
Precautions for Use (Be Sure to Read) Warning labels Warning label are attached on or near the components with potential hazards (This label is either attached or printed on the component.) to draw attention from users to potential hazards involved in handling the server. (Do not remove or black out this label and keep it clean).
Page 22: Handling Precautions (For Proper Operations)
Tape media: Approximately 1 day • For optional devices, we recommend you use our NEC products. Even if they are successfully installed or connected, installation of unsupported devices can cause the server to malfunction or even failure. You will be charged to repair failure or damage caused by use of such products even within warranty period.
Page 23: Handling Precautions (Anti-Static Measures)
Precautions for Use (Be Sure to Read) Handling precautions (Anti-static Measures) The server contains electronic components sensitive to static electricity. Avoid failures caused by static electricity when installing or removing any optional devices. • Wear a wrist strap (an arm belt or anti-static glove) Wear a wrist strap on your wrist and provide earthing before starting work.
Page 24 Precautions for Use (Be Sure to Read) Tips for your health and safety Using a computer extensively may affect different parts of your body. Here are tips you should follow while working on a computer to minimize strain on your body. Keep proper posture The basic body position for using a computer is sitting straight with your hands on the keyboard parallel with the floor, and your eyes...
Page 25: Chapter 1 General Description
NEC Express5800 Series Express5800/R120d-1E General Description This chapter introduces the features of this server and the name of each part. 1. Introduction 2. Accessories Verify the condition of your server's accessories. 3. Standard Features Check and maintain the server system by using the functions explained in this section.
Page 26: Introduction
This high performance server is powered by the latest microprocessor "Intel Xeon processor. NEC’s latest technology and architectures realize high-power and high-speed operation that cannot be matched by existing servers. The server is designed with consideration of not only reliability but also expandability, which enables you to use it as a network server.
Page 27: Accessories
Chapter 1 General Description 2. Accessories Accessories The carton box contains various accessories which are required for setup or maintenance. Make sure you have them all for future use. • Express5800/R120d-1E Server • Slide Rail set -Inner rail R × 1 -Inner rail L ×...
Page 28: Standard Features
Auto rebuild function (hot swapping supported) • BIOS password feature • The security lock that comes with the front bezel Management Utilities • NEC ESMPRO • ExpressUpdate • Remote controlling feature (EXPRESSSCOPE Engine 3) • RAID system management utility (Universal RAID Utility) •...
Page 29 Chapter 1 General Description 3. Standard Features • ® Enhanced Intel SpeedStep Technology supported Expandability • PCI Express 3.0 (x16 lanes): 1 slot (low profile) • PCI Express 2.0 (x4 lanes): 1 slot (low profile) • PCI Express 3.0 (x8 lanes): 1 slot (dedicated to RAID Controller) •...
Page 30 Chapter 1 General Description 3. Standard Features May not be supported depending on the installed processor type. Processor core speed depends on the number and type of CPU and DIMMs installed, and operating voltage (1.35/1.5 V). In 2-CPU configuration. Up to 192 GB in 1-CPU configuration With N8154-45 2.5-inch Hot Plug Drive Cage Kit installed.
Page 31: Management Features
The hardware components of the server provide operation control/reliability features as shown below. Additionally, NEC ESMPRO Agent, which is provided in EXPRESSBUILDER, enables you to collectively manage the state of your systems. You can also monitor the server states from a PC to manage the network where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
Page 32: Firmware And Software Version Management
3. Standard Features Firmware and Software Version Management Use of NEC ESMPRO Manager and ExpressUpdate Agent allows you to manage versions of firmware and software as well as update them by applying update packages. This function automatically updates multiple modules without stopping the system just by specifying the application of an update package from NEC ESMPRO Manager.
Page 33: Names And Functions Of Parts
Chapter 1 General Description 4. Names and Functions of Parts Names and Functions of Parts This section describes the names of the server parts. Front View Express5800/R120d-1E (2.5-inch Drive Model) (3)-1 (3)-3 (3)-2 (3)-4 (1) Front Bezel (5) STATUS LED (green/amber) The cover to protect the front of the server.
Page 34 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120d-1E (3.5-inch Drive Model) (3)-1 (3)-3 (3)-2 (3)-4 (1) Front Bezel (5) STATUS LED (green/amber) The cover to protect the front of the server. This cover can This LED indicates the server status. It lights green when be locked with the provided Bezel Lock Key.
Page 35: Front View (With The Front Bezel Removed)
Chapter 1 General Description 4. Names and Functions of Parts Front View (with the Front Bezel Removed) Express5800/R120d-1E (2.5-inch Drive Model) See (3) to (5) on previous page (13) (14) (8)-0 (8)-2 (8)-4 (11) (12) (15) (16) (17) (10) (19) (8)-1 (8)-5 (18)
Page 36 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120d-1E (3.5-inch Drive Model) See (3) to (5) on previous page (13) (14) (11) (12) (18) (15) (10) (16) (17) (8)-0 (8)-1 (8)-2 (8)-3 (8) 3.5-inch Drive Bay (16) POWER Switch/LED (green/amber) The bay where hard disk drives are installed.
Page 37: Rear View
Chapter 1 General Description 4. Names and Functions of Parts Rear View (8) (10) (5)-1 (5)-2 (14) (11) (12) (13) (9)-4 (9)-3 (9)-2 (9)-1 (1) Power Unit (Poser Supply Slot) (10) SPEED LED (green/amber) This unit supply DC power. The LED indicates the transfer speed of LAN ports. (2) AC Inlet (11) Management LAN Port This socket is used to connect the power cord.
Page 38: External View
Chapter 1 General Description 4. Names and Functions of Parts External View ex. Express5800/R120d-1E (3.5-inch Drive Model) (1) Top Cover (2) Release Button. Express5800/R120d-1E User’s Guide...
Page 39: Internal View
Chapter 1 General Description 4. Names and Functions of Parts Internal View The image below does not show the processor duct. ex. Express5800/R120d-1E (2.5-inch Drive Model) (3)-5 (3)-4 (3)-6 (3)-3 (3)-7 (3)-2 (3)-8 (3)-1 FAN8 FAN7 FAN6 FAN5 FAN4 FAN3 FAN2 FAN1 (7)-1 (7)-3...
Page 40: Motherboard(Mb)
Chapter 1 General Description 4. Names and Functions of Parts Motherboard(MB) (19) (21) (11)-1 (10) (20) (18)-8 (24) (11)-2 (18)-7 (18)-6 (1)-2 (18)-5 (15) Rear of Front of server server (13) (18)-4 (1)-1 (17) (23) (18)-3 (22) (18)-2 (14) (16) (18)-1 (12) Processor (CPU) socket...
Page 41: Status Indicators
While hardware is operating normally, STATUS LED lights green. STATUS LED is off or lights/flashes amber if there is a problem with hardware. The following table lists STATUS LED patterns, their explanation and solution. Tips You can reference error logs to check the causes of failures by using NEC ESMPRO. STATUS LED pattern Explanation Solution −...
Page 42: Link/Act Led ( 1, 2, 3, 4)
Chapter 1 General Description 4. Names and Functions of Parts STATUS LED pattern Explanation Solution On (amber) A temperature alarm was detected. Check the internal fan for dusts. Also check if the fan unit is properly connected. If the LED indication does not change when the fans are normal, contact your sales representative.
Page 43: Optical Disk Access Led
Chapter 1 General Description 4. Names and Functions of Parts 4.7.5 Optical disk access LED The access LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed. 4.7.6 UID LED (ID) The UID LED is provided one each at the front and rear of the server.
Page 44: Leds For Lan Connectors
Chapter 1 General Description 4. Names and Functions of Parts Important Observe the following precautions whenever you use the auto rebuild feature. • Do not turn off or reboot the server while a hard disk drive is being rebuilt. • Wait at least 90 seconds before installing a hard disk drive after removing one. •...
Page 45: Ac Power Led (Power Supply Unit)
Chapter 1 General Description 4. Names and Functions of Parts 4.7.9 AC POWER LED (POWER Supply Unit) AC POWER LED Standard power supply unit AC POWER LED pattern Explanation Recommended action On (green) The server is powered on. – Flashing (green) The power cable is connected and AC power –...
Page 46: Chapter 2 Preparations
NEC Express5800 Series Express5800/R120d-1E Preparations This chapter describes preparations for using this server. 1. Installing Internal Optional Devices You can skip this section if you did not purchase any optional devices. 2. Installation and Connection You must place the server in an appropriate location and connect cables following this section.
Page 47: Installing Internal Optional Devices
• Use only the devices and cables specified by NEC. You will be charged to repair damages, malfunctions, and failures caused by the use of any devices or cables not specified for use with this server even within the warranty period.
Page 48: Anti-Static Measures
Chapter 2 Preparations 1. Installing Internal Optional Devices Anti-static Measures The server and Optional Devices contains electronic components sensitive to static electricity. Avoid failures caused by static electricity when installing or removing any optional devices. Wear a wrist strap (an arm belt or anti-static glove) Wear a wrist strap on your wrist and provide earthing before starting work.
Page 49: Overview Of Installation And Removal
Chapter 2 Preparations 1. Installing Internal Optional Devices Overview of Installation and Removal Install/remove components by using the following procedure. Installing/removing internal components except for Hard Disk Drives should be done after dismounting the server from the rack. It is recommended that more than one person removes the server from the rack. CAUTION Be sure to observe the following precautions to use the server safely.
Page 50 Chapter 2 Preparations 1. Installing Internal Optional Devices 7. Depending on the components to be installed or removed, follow the procedure in order. Refer to Chapter 2 (1.7 Internal Flash Memory) to (1.15 Use of Internal Hard Disk Drives in the RAID System).
Page 51: Confirming Servers (Uid Switch)
Chapter 2 Preparations 1. Installing Internal Optional Devices Confirming Servers (UID Switch) Using the UID switch helps you to identify the target server. When the server is working or before you turn the server off or disconnect a cable from the server, be sure to identify the target server by using the UID switch first.
Page 52: Removing Front Bezel
Chapter 2 Preparations 1. Installing Internal Optional Devices Removing Front Bezel You need to remove the front bezel when manipulating POWER switch or removing the top cover. 1. Insert the attached security key into the key slot and turn the key to the front bezel side while pressing it lightly to release the lock.
Page 53: Removing Top Cover
Chapter 2 Preparations 1. Installing Internal Optional Devices Removing Top Cover You need to remove top cover when installing or removing the following components or change internal cable connection: Internal flash memory, TPM Kit Processor, DIMM Extra battery for RAID controller, PCI card Additional HDD cage, Optical disk drive Important...
Page 54: Internal Flash Memory
Chapter 2 Preparations 1. Installing Internal Optional Devices Internal Flash Memory This section describes the procedure for installing the Internal Flash Memory. Internal flash memory connector 1.7.1 Installation Install the Internal Flash Memory in the following procedure. 1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. 2.
Page 55: Tpm Kit
Chapter 2 Preparations 1. Installing Internal Optional Devices TPM Kit This section describes the procedure for installing optional TPM Kit. TPM kit connector 1.8.1 Installation Install TPM Kit in the following procedure. Note The TPM kit once installed cannot be removed. 1.
Page 56: Processor (Cpu)
Chapter 2 (1.2 Anti-static Measures). • Make sure to use the processor authorized by NEC. Installing a third-party processor may cause a failure of the processor as well as the motherboard. Repair of the server due to failures or damage resulted from installing such a processor will be charged.
Page 57 Chapter 2 Preparations 1. Installing Internal Optional Devices 4. Locate the CPU socket to which you are going to install a processor. 5. Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops. 6.
Page 58 Chapter 2 Preparations 1. Installing Internal Optional Devices 8. Put the additional processor on the CPU socket slowly and gently. For easy installation, hold edges of processor with your thumb and index fingers so that the notch is aligned with the key on the CPU socket. Notch Pin mark Pin mark...
Page 59 Chapter 2 Preparations 1. Installing Internal Optional Devices 11. Put the heat sink on processor and fix the heat sink with four screws. Temporarily tighten the four screws diagonally, then tighten them securely. Make sure that the screw aligns with the screw hole. If not, the screw may damage the motherboard. Note Make sure that the heat sink is properly attached and properly direction 12.
Page 60: Replacement / Removal
Chapter 2 Preparations 1. Installing Internal Optional Devices 13. Install the additional fan units provided with heat sink. Remove three dummy covers from the slots where you are going to install additional fan units. 14. Install three fan units in fan cage, and connect the fan cable with connector on motherboard. FAN5 FAN6 FAN7 15.
Page 61: Dimm
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.10 DIMM Install a DIMM (Dual Inline Memory Module) to a DIMM socket on the motherboard in the server. The motherboard provides 12 sokets to install DIMMs. • Important You must avoid static electricity to work with the procedure below. For details, refer to Chapter 2 (1.2 Anti-static Measures).
Page 62: Memory Clock
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.10.2 Memory Clock The server supports the memory clock speed of DDR3-1066/1333/1600MHz. However, the actual memory clock speed depends on CPU model and memory configuration. (The all of DIMMs operate at the same clock speed.) 1.10.3 Memory RAS Feature The server supports the following RAS features.
Page 63: Dimm Installation Order
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.10.4 DIMM installation order • Note DIMM installation order in 1-CPU configuration differs from that in 2-CPU configuration. • If CPU2 is not installed, CPU2_DIMM1 to CPU1_DIMM6 are disabled. Installation order depends on features to be used. See the table below. CPU2_DIMM 1 CPU2_DIMM 4 CPU2_DIMM 2...
Page 64: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.10.5 Installation Install a DIMM by using the following procedure. 1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. 2. Lift the processor duct and remove it. 3.
Page 65 Chapter 2 Preparations 1. Installing Internal Optional Devices 9. Set the paging file size to the recommended value (Total memory size x 1.5) or more. If using a Windows OS, refer to Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information)) in "Installation Guide (Windows)".
Page 66: Removal / Replacement
Note When removing a defective DIMM, check error messages displayed at POST or NEC ESMPRO and check the DIMM socket where the defective DIMM is installed. Take the steps below after replacing or removing DIMMs. Confirm that no error messages are displayed on POST. If any error message is displayed, refer to Chapter 3 (1.
Page 67 Chapter 2 Preparations 1. Installing Internal Optional Devices 1.10.7 Using Memory RAS Feature The server has RAS feature including Standard (Independent) Memory feature (x4 SDDC ECC memory), Memory Mirroring feature, Memory LockStep (x8 SDDC ECC memory) feature and Memory Sparing feature.
Page 68 Chapter 2 Preparations 1. Installing Internal Optional Devices Memory Mirroring Feature The memory mirroring feature writes the same data into two groups of DIMMs corresponding with each other between memory channels (channels 2 and 3) to provide data redundancy. • Important The Memory Mirroring feature uses channels 2 and 3.
Page 69 Chapter 2 Preparations 1. Installing Internal Optional Devices Memory LockStep Feature (x8 SDDC) In Memory LockStep feature, the DIMMs in two groups corresponding to two memory channels (channels 2 and 3) is multiplexed and operated in parallel to enable x8 SDDC (x8 Single Device Data Correction). With this feature, a single device can detect and correct one to eight-bit error.
Page 70 Chapter 2 Preparations 1. Installing Internal Optional Devices Memory Sparing Feature The memory sparing feature puts a memory Rank of a memory controller in each CPU into standby status as spare devices. If a correctable error occurs in a Rank in the running memory controller, the feature automatically changes the running Rank from the failed one to a Rank in the standby state to continue the processing.
Page 71: Extra Battery For Raid Controller
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.11 Extra Battery for RAID Controller If a RAID Controller (N8103-149/150/151/160) is installed, use the optional extra battery to avoid data loss caused by accidents including temporary blackout during a Write Back operation. The model of the extra battery to be used depends on RAID Controller.
Page 72 Chapter 2 Preparations 1. Installing Internal Optional Devices 4. Connect the cable to the additional battery. When connecting the cable, orient the cable so that its marking will fit the connector. 5. Remove the two screws, and remove cover of battery bracket. Screw Screw Note...
Page 73 Chapter 2 Preparations 1. Installing Internal Optional Devices When installing one extra battery 7. Fix the cable at the holder on the duct. When installing two extra batteries 8. Connect the cable of extra battery to RAID Controller. When connecting the cable, orient the cable so that its marking will fit the connector. Express5800/R120d-1E User’s Guide...
Page 74 Chapter 2 Preparations 1. Installing Internal Optional Devices Important Support barRoute the cable so that it passes under the support bar. Support barSupport 9. Attach the RAID Controller to the rise card. For how to install RAID Controller, refer to Chapter 2 (1.12 PCI Card). 10.
Page 75 Chapter 2 Preparations 1. Installing Internal Optional Devices 4. Connect the cable to the additional battery. When connecting the cable, orient the cable so that its marking will fit the connector. 5. Remove the battery bracket from the duct. 6. Install the extra battery to the duct. •...
Page 76 Chapter 2 Preparations 1. Installing Internal Optional Devices When installing one extra battery 7. Fix the cable at the holder on the duct. When installing two extra batteries 8. Install the battery bracket. ② Insert the portion (①) into the duct, and fix the hook (②) to the duct.
Page 77 Chapter 2 Preparations 1. Installing Internal Optional Devices 9. Connect the cable of extra battery to RAID Controller. When connecting the cable, orient the cable so that its marking will fit the connector. Important Support barRoute the cable so that it passes under the support bar. Support bar 10.
Page 78 Chapter 2 Preparations 1. Installing Internal Optional Devices 1.11.3 Removal To remove the extra battery for the RAID Controller, reverse the installation procedure. Important Support barWhen removing RAID Controller and extra battery, be careful that the cables are not caught with the support bar. Otherwise, RAID Controller might be damaged.
Page 79: Pci Card
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.12 PCI Card This server provides two types of riser cards for PCI card and a slot for RAID controller. The riser card can connect two Low Profile PCI cards and one RAID controller (total three PCI card can be mounted). Important You must avoid static electricity to work with the procedure below.
Page 80: Supported Cards And Available Slots
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.12.2 Supported cards and available slots The following tables list supported cards and slots available for them. For details of the functions of each board, refer to the manual supplied with the card. •...
Page 81 Chapter 2 Preparations 1. Installing Internal Optional Devices Slot number Remarks PCI Standard PCIe 3.0 PCIe 2.0 PCI slot performance *1 X8 lane X16 lane X4 lane Product Socket type *2 X8 sockett X16 socket X8 socket number Transfer bandwidth 8Gb/s 5Gb/s (per lane) *1...
Page 82: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.12.3 Installation Install a riser card to a PCI card in the following procedure. Important When installing a PCI card, make sure the connector of the card fits the connector of the riser card. •...
Page 83 Chapter 2 Preparations 1. Installing Internal Optional Devices Screw 4. Remove the screw, and remove RAID Controller bracket. 5. Remove the two screws from RAID Controller, Screws and remove PCI bracket. 6. Install the controller bracket you have removed in Step 4 to RAID Controller with two screws you have removed in Step 5.
Page 84 Chapter 2 Preparations 1. Installing Internal Optional Devices Tips Connect a cable between connector on HDD backplane board and RAID card before installing the riser card to the server. 8. Insert the riser card into the slot on motherboard. When connecting the card, position the terminal part of the card to the slot on the motherboard and insert 9.
Page 85 Chapter 2 Preparations 1. Installing Internal Optional Devices When using the optional RAID Controller (N8103-149/150/151) For details, refer to the manual that comes with optional RAID Controller (N8103-149/150/151). • Important You must avoid static electricity to work with the procedure below. For details, refer to Chapter 2 (1.2 Anti-static Measures).
Page 86 Chapter 2 Preparations 1. Installing Internal Optional Devices 4. Remove the four screws and remove a cover of a battery bracket. 5. Slide and lift the battery bracket in accordance with the figure on the right, and remove the battery bracket from the duct.
Page 87 Chapter 2 Preparations 1. Installing Internal Optional Devices Screw 8. Remove the screw, and remove RAID Controller bracket. 9. Remove the two screws from RAID Controller, and remove PCI bracket. 10. Install the controller bracket you have removed in Step 8 to RAID Controller with two screws you have removed in Step 9.
Page 88 Chapter 2 Preparations 1. Installing Internal Optional Devices Important • When connecting FBU control cable to RAID Controller and FBU, be sure to mate the black marks on FBU control cable connector and on RAID Controller connector. If the cable is connected conversely, the component might be damaged.
Page 89 Chapter 2 Preparations 1. Installing Internal Optional Devices 13. Insert the riser card into the slot on motherboard. When connecting the card, position the terminal part of the card to the slot on the motherboard and insert it. Important When installing RAID Controller, be careful that cables (e.g., FBU control cable and internal SAS/SATA cables) are not caught with the support bar.
Page 90 Chapter 2 Preparations 1. Installing Internal Optional Devices Battery bracket made of plastic: 1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. 2. Lift the processor duct and remove it from the server. 3.
Page 91 Chapter 2 Preparations 1. Installing Internal Optional Devices ② 6. Install the battery bracket. Insert the portion (①) into the duct, and fix the hook (②) to the duct. ① Screws 7. Remove the screw securing the riser card. Hold the both ends of the riser card and lift it off.
Page 92 Chapter 2 Preparations 1. Installing Internal Optional Devices 10. Install the controller bracket you have removed in Step 8 to RAID Controller with two screws you have removed in Step 9. 11. Install a RAID Controller to the riser card. When installing the card, position the terminal part of the PCI card to the Black mark...
Page 93 Chapter 2 Preparations 1. Installing Internal Optional Devices Important Do not touch the terminal part of riser cards or RAID Controller and the signal pins of electric parts installed on the card. Installing cards with dirt or oil can cause malfunction. •...
Page 94 Chapter 2 Preparations 1. Installing Internal Optional Devices PCI #1B/#1C 1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations. 2. Remove the three screws from the rise card B. Hold the both ends of the riser card and lift it off.
Page 95 Chapter 2 Preparations 1. Installing Internal Optional Devices 6. Install riser card. When installing the card, position the terminal part of the PCI card to the riser card slot and insert it. Important Do not touch the terminal part of riser cards or PCI cards and the signal pins of electric parts installed on the card.
Page 96 Chapter 2 Preparations 1. Installing Internal Optional Devices 10. Continue to install or remove internal optional devices, mount and connect the server, and turn it on. 11. Make sure that no error messages are displayed on POST screen. For details on POST error messages, refer to Chapter 3 (1. POST Error Message) in "Maintenance Guide".
Page 97 Chapter 2 Preparations 1. Installing Internal Optional Devices When using the optional controller (N8103-160) For details, refer to the manual that comes with optional RAID Controller (N8103-160). • Important You must avoid static electricity to work with the procedure below. For details, refer to Chapter 2 (1.2 Anti-static Measures).
Page 98: Additional Hdd Cage
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.13 Additional HDD Cage The server of Express5800/R120d-1E(2.5-inch Drive Model) can have additional HDD cage for installing additional Hard Disk Drives. The additional HDD cage is installed on front side of the server, and is used exclusively with the optical disk drive.
Page 99 Chapter 2 Preparations 1. Installing Internal Optional Devices 4. Pull out the optical disk drive bay bracket to the direction shown by an arrow. Note Keep the removed optical disk drive bay bracket for future use. 5. Install the additional HDD cage to the chassis, and secure it with two screws you have removed in Step 3. 1.13.2 Removal To remove an Additional HDD cage, reverse the installation procedure.
Page 100: Optical Disk Drive
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.14 Optical Disk Drive This section describes the procedure for installing the optional optical disk drive. Important Do not install any unsupported optical disk drive. Express5800/R120d-1E (2.5-inch Drive Model) Optical disk drive bay Optical disk drive bay Express5800/R120d-1E (3.5-inch Drive Model) Express5800/R120d-1E User’s Guide...
Page 101: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.14.1 Installation Install an optical disk drive in the following procedure. Express5800/R120d-1E (2.5-inch Drive Model) 1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.. 2.
Page 102 Chapter 2 Preparations 1. Installing Internal Optional Devices 5. Secure the bracket to optical disk drive with a screw you have removed in Step 3. Screw 6. Insert the optical disk drive into the slot and secure the drive tray with two screws you have removed in Step 2.
Page 103 Chapter 2 Preparations 1. Installing Internal Optional Devices 3. Install optical disk drive to the tray. 4. Secure the bracket to optical disk drive with a screw you have removed in Step 2. 5. Connect the optical disk drive cable. 1.14.2 Removal To remove an optical disk drive, reverse the installation procedure above.
Page 104: Use Of Internal Hard Disk Drives In The Raid System
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.15 Use of Internal Hard Disk Drives in the RAID System This section describes how to use the Hard Disk Drives installed in the HDD cage at the front of the server in the RAID System.
Page 105: Connecting Cables
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.15.1 Connecting cables To use an on-board RAID Controller or optional RAID Controller, the interface cable must be connected. Refer to the figures below for how to connect cables. If using onboard RAID Controllers for Express5800/R120d-1E 2.5-inch Drive Models (1 to 4 units) Connect the first pin of the cable (marked with Δ) to the first pin of the SGPIO1 connector (marked with a bold line) on HDD backplane board.
Page 106 Chapter 2 Preparations 1. Installing Internal Optional Devices If using optional RAID Controllers for Express5800/R120d-1E 2.5-inch models (1 to 8 units) Orient the cable so that the first pin of the cable (marked with Δ) will connect to the first pin of the SGPIO1 connector (marked with a bold line) on HDD backplane board.
Page 107 Chapter 2 Preparations 1. Installing Internal Optional Devices If using onboard RAID Controllers for Express5800/R120d-1E 3.5-inch Drive Model (1 to 4 units) Connect the first pin of the cable (marked with Δ) to the first pin of the SGPIO1 connector (marked with a bold line) on HDD backplane board. SAS/SATA Cable Marked with SGPIO Cable...
Page 108 Chapter 2 Preparations 1. Installing Internal Optional Devices If using optional RAID Controllers for Express5800/R120d-1E 3.5-inch Drive Models (1 to 4 units) Connect the first pin of the cable (marked with Δ) to the first pin of the SGPIO1 connector (marked with a bold line) on HDD backplane board.
Page 109 Chapter 2 Preparations 1. Installing Internal Optional Devices 1.15.2 Notes on setting up a RAID System Note the following points when setting up a RAID System. • The number of Hard Disk Drives required varies in each RAID level. • If on-the optional RAID Controller (N8103-149) is used, the RAID System cannot be built in RAID5/RAID6/RAID50/RAID60.
Page 110: Installing Top Cover
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.16 Installing Top Cover When all internal optional devices including DIMM and PCI card are installed, close the server with Top Cover. Important To avoid damage to the cable, connect cables for PCI card such as LAN cable after installing Top Cover.
Page 111: Inch Hard Disk Drive
Important Use Hard Disk Drives specified by NEC. Installing a third-party Hard Disk Drive might cause a failure of the server and the Hard Disk Drive. Note the following precautions to install hard disk drives.
Page 112: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.17.1 Installation Install a Hard Disk Drive by using the following procedure. Follow the same installation procedure for other slots. Note In the RAID System, build a Disk Array using Hard Disk Drives that have the same specifications (capacity, rotational speed, and standard).
Page 113 Chapter 2 Preparations 1. Installing Internal Optional Devices 5. Hold the drive carrier firmly and insert it into the slot. • Note Push it all the way until the handle’s lock touches the frame. • Hold the drive carrier firmly with both hands. 6.
Page 114: Removal
If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, and Disposal) in “Maintenance Guide” to erase data. Important NEC assumes no liability for data leakage should the product be transferred to a third party without erasing the data. Note If you have to remove a disk due to a Hard Disk Drive failure, check the slot with its DISK LED lit in amber.
Page 115: Replacing A Hard Disk Drive In The Raid System (Auto Rebuild)
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.17.3 Replacing a Hard Disk Drive in the RAID System (Auto Rebuild) In the RAID System, you can use the auto rebuild feature to restore data back to the state before a failure occurred by writing the data saved before the replacement to a new Hard Disk Drive after replacing the broken Hard Disk Drive.
Page 116: Inch Hard Disk Drive
Important Use Hard Disk Drives specified by NEC. Installing a third-party Hard Disk Drive might cause a failure of the server and the Hard Disk Drive. Note the following precautions to install hard disk drives.
Page 117: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.18.1 Installation Install a Hard Disk Drive by using the following procedure. Note In the RAID System, build a Disk Array using Hard Disk Drives that have the same specifications (capacity, rotational speed, and standard). 1.
Page 118 Chapter 2 Preparations 1. Installing Internal Optional Devices 5. Hold the drive carrier firmly and insert it into the slot. • Note Push it all the way until the handle’s lock touches the frame. • Hold the drive carrier firmly with both hands. 6.
Page 119: Removal
If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, and Disposal) in “Maintenance Guide” to erase data. Important NEC assumes no liability for data leakage should the product be transferred to a third party without erasing the data. Note If you have to remove a disk due to a Hard Disk Drive failure, check the slot with its DISK LED lit in amber.
Page 120 Chapter 2 Preparations 1. Installing Internal Optional Devices 1.18.3 Replacing a Hard Disk Drive in the RAID System (Auto Rebuild) In the RAID System, you can use the auto rebuild feature to restore data back to the state before a failure occurred by writing the data saved before the replacement to a new Hard Disk Drive after replacing the broken Hard Disk Drive.
Page 121: Power Supply Unit
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.19 Power Supply Unit This server can contain two power supply units. The server provides a redundant power configuration that ensures continued operation of the system in the unlikely event one of the power supply units fails. You can select a power supply unit appropriate your system configuration.
Page 122: Installation
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.19.2 Installation Follow steps below to install a power supply unit: 1. Refer to steps 1 to 4 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. 2. Remove the blank cover. REAR Slot for standard Slot for optional...
Page 123 Chapter 2 Preparations 1. Installing Internal Optional Devices Tips To prevent getting away of an AC cord unexpectedly while server working, It's better to use AC cable tie. mounting hole for AC cable tie AC cable tie Put in a mounting hole of power supply unit this way. 5.
Page 124 Chapter 2 Preparations 1. Installing Internal Optional Devices 1.19.3 Replacing a Failing Power Supply Unit Replace only when the power supply unit fails. To remove a power supply unit , reverse the installation procedure above. CAUTION Be sure to observe the following precautions to use the server safely. Failure to observe the precautions may cause burns, injury, and property damage.
Page 125 Chapter 2 Preparations 1. Installing Internal Optional Devices Important To maintain the cooling effect in the server, install the blank cover in the vacant slot. 6. Install the new power supply unit taking steps 3 to 7 of "Installation", and confirm that the power supply unit is installed normally.
Page 126: Installing Front Bezel
Chapter 2 Preparations 1. Installing Internal Optional Devices 1.20 Installing Front Bezel When installing Front Bezel, engage catches of front bezel with those on rails. After installation, lock the front bezel with security key. The illustration below shows Express5800/R120d-1E (2.5-inch Drive Model). Important Be careful not to press POWER Switch.
Page 127: Installation And Connection
Chapter 2 Preparations 2. Installation and Connection Installation and Connection This section describes how to position the server and connect cables. Installation This server must be mounted to a rack which conforms to EIA standards for use. 2.1.1 Installing Rack Refer to the manual that comes with your rack for how to install the rack, or consult with your sales representative.
Page 128 Chapter 2 Preparations 2. Installation and Connection Do not install the rack or server under the following environment. Doing so may cause malfunction of the server. • Narrow space from which devices cannot be pulled out from the rack completely •...
Page 129: Installing The Server To The Rack Or Removing It From The Rack
Chapter 2 Preparations 2. Installation and Connection 2.1.2 Installing the server to the rack or removing it from the rack Mount the server to the rack. (This section also describes the removal procedure.) WARNING Be sure to observe the following precautions to use the server safety. Failure to observe the precautions may cause death or serious injury.
Page 130 Chapter 2 Preparations 2. Installation and Connection Preparation • Checking rails • Installing inner and outer rails Checking rails Make sure the orientation of inner and outer rails by viewing labels on each rail. Inner rail Label Outer rail Installing inner rails 1.
Page 131 Chapter 2 Preparations 2. Installation and Connection 2. Fit the square-shaped protrusions of outer rail to the square holes of a 19-inch rack. Make sure that it makes a clicking sound indicating that it is locked. The image on the right shows the front left side of the rack.
Page 132 Chapter 2 Preparations 2. Installation and Connection Installation the server Mount the server to a rack in the following procedure. Important Always install the server with two or more persons. 1. Pull the slide rail from the outer rail that is mounted on rack until the slide rail is locked.
Page 133 Chapter 2 Preparations 2. Installation and Connection Removal procedure Remove the server from the rack in the following procedure. This can be removed by one person but it is recommended more than one person work on this together. Important Always remove the server with two or more persons. 1.
Page 134 Chapter 2 Preparations 2. Installation and Connection (a) Removing Outer Rail Remove outer rails from the rack in the following procedure. 1. Refer to Chapter 2 (2.1.2 Installing the server to the rack or removing it from the rack, Removal procedure) to remove the server from the rack.
Page 135: Connection
Chapter 2 Preparations 2. Installation and Connection Connection Connect peripheral devices to the server. Connectors that allow a variety of peripheral devices to be connected are provided at the front and rear of the server. Images on the following pages show the peripheral devices that can be connected in their standard state and their respective connector positions.
Page 136 Chapter 2 Preparations 2. Installation and Connection Express5800/R120d-1E (3.5-inch Drive Model) Display unit *1 USB device FRONT Display unit *1 Device with serial Finally, connect the power cord interface to an outlet. *2 For connecting with UPS, refer to the next section. REAR Management LAN port...
Page 137 Chapter 2 Preparations 2. Installation and Connection Display unit *1 Express5800/R120d-1E (2.5-inch Drive Model) USB device FRONT Display unit *1 Device with serial interface Finally, connect the power cord to an outlet. *2 For connecting with UPS, refer to the next section. REAR Management LAN port...
Page 138 Chapter 2 Preparations 2. Installation and Connection Tips 2 ports USB connectors at the rear of the server are supplied with power even when DC is off. Note the following precautions to connect cables. • When the device is not Plug and Play device, turn off the server and devices before connecting. •...
Page 139: Connecting To A Uninterruptible Power Supply (Ups)
Chapter 2 Preparations 2. Installation and Connection 2.2.1 Connecting to a uninterruptible power supply (UPS) To connect the power cord of the server to the uninterruptible power supply (UPS), use the connector output on the rear of the UPS. For details, refer to the manual supplied with the UPS. Computer interface port (UPS) Example Option slot...
Page 140: Chapter 3 Setup
NEC Express5800 Series Express5800/R120d-1E Setup This chapter describes how to set up the server. 1. Turning on the Server POST (Power-On Self-Test) is explained in this section. 2. System BIOS Setup You can customize the BIOS settings by following the instructions in this section.
Page 141: Turning On The Server
Chapter 3 Setup 1. Turning on the Server Turning on the Server Pressing the POWER switch at the front of the server turns on the server. Turn on the server by using the following procedure. • Wait for at least 40 seconds before turning on the server after connecting the Tips power cord.
Page 142: Post
Chapter 3 Setup 1. Turning on the Server POST POST (Power-On Self-Test) is a self-diagnostic program stored in the server as standard. POST automatically runs immediately after the server is turned on and checks the motherboard, memory, processor (CPU), keyboard, and mouse. POST also displays the start-up messages of different utilities during the operation.
Page 143: Post Error Messages
Chapter 3 Setup 1. Turning on the Server <F3> key: Run EXPRESSBUILDER from Internal Flash Memory (optional). For information on EXPRESSBUILDER, refer to Chapter 3 (4. EXPRESSBUILDER) • If the optional Internal Flash Memory is not installed in the system, <F3> key Note message will not be displayed.
Page 144: Bios Setup Utility (Setup)
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network If you press <F2> key at this time, SETUP runs and displays Main menu upon completion of POST. (You can also press <F2> key while NEC logo appears to display Main menu.) Important If password is set, you will be prompted to enter password at next startup of SETUP.
Page 145: Description On On-Screen Items And Key Usage
Chapter 3 Setup 2. BIOS Setup Utility (SETUP) Description on On-Screen Items and Key Usage This section shows display examples and how to control the key. Use the keyboard to work with the SETUP utility. Indicates the currently displayed menu Indicates the menu has submenus.
Page 146 Chapter 3 Setup 2. BIOS Setup Utility (SETUP) <F2> key If you press this key, the following window appears. If you select Yes, the previous parameter(s) are restored. However if you save parameter(s) using [Save Changes], the saved parameter(s) are restored. Load Previous Values? [Yes] <F3>...
Page 147: Cases That Require Configuration
Boot → Bootup Numlock State → On NumLock on power ON Boot → Quite Boot → Disabled Off the function to display By pressing the <Esc> key, the NEC logo during POST prevent the display of the logo. Advanced → Memory Memory...
Page 148 Chapter 3 Setup 2. BIOS Setup Utility (SETUP) Password If you have set a password, a message prompt you to enter password will be displayed from the next time. Enter password [ You can attempt password entry up to 3 times. If you entered a wrong password 3 times, operation stops. (You cannot operate further.) Turn off the power.
Page 149: Expressscope Engine 3
2. If you press the <F4> key at this time, ROM utility starts upon completion of POST. You can also press the <F4> key while the NEC logo is being displayed to open the Off-line TOOL MENU screen. 3. The keyboard selection screen appears. Select your keyboard type.
Page 150 Chapter 3 Setup 3. EXPRESSSCOPE ENGINE 3 4. When the Off-line TOOL MENU appears, select BMC Configuration, BMC Configuration, Network, and then Property. 5. If Property is selected, the following screen is displayed. On this screen, specify whether to use DHCP and if DHCP is not used, configure IP Address/Subnet Mask.
Page 151 Chapter 3 Setup 3. EXPRESSSCOPE ENGINE 3 6. Connect the LAN cable to the management LAN connector in order to connect to the network. It will be available for use if you access EXPRESSSCOPE Engine 3 via Web browser from PC for management according to the setting.
Page 152: Expressbuilder
To use this feature, select Os (Windows reinstallation) installation in the menu after boot. Storage of software* Stores various bundled software (such as NEC ESMPRO Agent). Maintenance Diagnoses your server system. To use this feature, select Tool menu in the menu after boot.
Page 153: Installing Software Components
Chapter 3 Setup 5. Installing Software Components Installing Software Components Continue to install software components such as OS. Refer to the instructions below. Installation Guide (Windows) Express5800/R120d-1E User’s Guide...
Page 154: Turning Off The Server
Chapter 3 Setup 6. Turning Off the Server Turning Off the Server Turn off the server by using the following procedure. If the power cord of the server is connected to a UPS, refer to the documentation supplied with the UPS or the documentation for the application controlling the UPS. 1.
Page 155: Chapter 4 Appendix
NEC Express5800 Series Express5800/R120d-1E Appendix Specifications PCI Configuration Express5800/R120d-1E User’s Guide...
Page 156: Specifications
Operating: 10 to 40°C, Storage: -10 to 55°C Temperature Environmental requirements Humidity Operating: 20 to 80%, Storage: 20 to 80% (No condensation either when operating or when stored) EXPRESSBUILDER(NEC ESMPRO Manager(Windows), NEC ESMPRO Agent,User's Guide(electronic document) Main accessories included), Getting Started, Notes on Use, one-touch rack rail...
Page 157 Temperature Environmental requirements Humidity Operating: 20 to 80%, Storage: 20 to 80% (No condensation either when operating or when stored) EXPRESSBUILDER(NEC ESMPRO Manager(Windows), NEC ESMPRO Agent, Main accessories User's Guide(electronic document) included), Getting Started, Notes on Use, one-touch rack rail...
Page 158: Pci Configuration
Chapter 4 Appendix 2. PCI Configuration PCI Configuration Bus Number If Enabled (factory setting) is specified for Advanced → PCI Configuration → PCI Bus Static Allocation in BIOS SETUP, PCI bus numbers are assigned as shown below: Range of PCI bus Onboard / PCI card number 8(08h)
Page 159 Chapter 4 Appendix 2. PCI Configuration Interrupt Request Interrupt requests are assigned as shown below. Find an appropriate one to install a PCI card. "PCI1A: INTA" denotes INTA of PCI card installed in PCI slot 1A. If the operating system and device driver support MSI/MSI-X (Message Signaled Interrupts), assignments differ from those shown in the table below.
Page 160 Chapter 4 Appendix 2. PCI Configuration Properties shown on Windows Device Manager PCI slot numbers shown on Device Manager → Properties → General tab correspond to actual PCI slot numbers as shown below: Indication on Properties page PCI slot Windows Server 2008 Windows Server 2003 Windows Server 2008 R2 PCI1A...

This manual is also suitable for:

R120d-1e n8100-1954f Express5800 series R120d-1e n8100-1956f

NEC R120d-1E N8100-1955F User Manual

Chapter 1 General Description

Chapter 2 Preparations

Chapter 3 Setup

Chapter 4 Appendix

Quick Links

Related Manuals for NEC R120d-1E N8100-1955F

Summary of Contents for NEC R120d-1E N8100-1955F

This manual is also suitable for:

Table of Contents