Advertisement
MT15 Installation Guide - Indoor Air Quality w/CO2
Media, iframe, embed and object tags are not supported inside of a PDF.
Overview
The Cisco Meraki MT15 is a cloud managed Indoor Air Quality with CO2 Sensor that is exceptionally simple to deploy
and configure due to its integration into the Meraki dashboard and the use of BLE technology. The MT family eliminates
the complex and costly setups required by traditional solutions which removes the limitations of placement of these
sensors.
About this Guide
This guide provides instructions on how to install and configure your MT15 Environmental Sensors.
Product Overview
Physical Specifications
Power
Operating Environment
Hardware
• PoE; 802.3af (Power Only)
• Permanent DC Power: 5V;2A USB-C (Sold separately)
• Temperature: 0°C - 55°C(32F - 131F)
• Relative Humidity: 0 - 95 % RH
• Multicolor, multifunction LED Ring
1
Advertisement
Table of Contents
Summary of Contents for Cisco Meraki MT15
- Page 1 Overview The Cisco Meraki MT15 is a cloud managed Indoor Air Quality with CO2 Sensor that is exceptionally simple to deploy and configure due to its integration into the Meraki dashboard and the use of BLE technology. The MT family eliminates the complex and costly setups required by traditional solutions which removes the limitations of placement of these sensors.
- Page 2 • General purpose button • Reset button • USB-C Port (Power Only) • PoE Port (Power Only) General Purpose Button The MT15 has a general purpose button on the top which allows you to wake up the sensor and test if it is able to connect to a gateway.
-
Page 3: Package Contents
least five seconds and then released, the sensor will reboot and it will be restored to its original factory settings by deleting all configuration information stored on the unit. USB-C Port The MT15 sensors have a USB-C Port on the back that can be used to provide an alternate source of power using a compatible accessory. -
Page 4: Pre-Installation Preparation
Pre-Installation Preparation You should complete the following steps before going on-site to perform an installation. Configure Your Network in Dashboard The following is a brief overview only of the steps required to add an MT15 to your network. For detailed instructions about creating, configuring and managing Meraki Sensor networks, refer to the online documentation (https://documentation.meraki.com/MT). -
Page 5: Operating Modes
Operating Modes The MT15 sensors have 2 operating modes: 1. USB-C Powered - Requires a 5V; 0.2A USB-C power adapter to power the sensor. 2. PoE - 802.3af NOTE: When powered by PoE, a Gateway is still required for MT15, this is for Power Only. Mounting Instructions... - Page 6 For most mounting scenarios, the MT15 has flexible options to provide quick and simple mounting. The instructions are as follows: NOTE - It is important to ensure that the sensor is oriented in the correct position for the data collected to be accurate.
- Page 7 1. In order to mount the sensor on different locations, there are 2 supported orientations 1. Wall - The mounting plate can be directly screwed onto the wall (Option C) or or on a Junction Box. 2. Ceiling - The device can be mounted on a ceiling using the included screws, or by using a T Rail mount (Not included) (Option B), or on a Junction Box (Option A).