Disable Fast Startup; Disable The Built-In Battery; Replace A Cru; Base Cover Assembly - Lenovo ThinkPad L13 Gen 5 User Manual
Hide thumbs
Also See for ThinkPad L13 Gen 5:
- Hardware maintenance manual (111 pages) ,
- User manual (100 pages) ,
- Manual (11 pages)
Table of Contents
Advertisement
Disable Fast Startup
Follow the instructions to disable Fast Startup.
Step 1.
Go to Control Panel and view by Large icons or Small icons.
Step 2.
Click Power Options, and then click Choose what the power buttons do on the left pane.
Step 3.
Click Change settings that are currently unavailable at the top.
Step 4.
If prompted by User Account Control (UAC), click Yes.
Step 5.
Clear the Turn on fast startup check box, and then click Save changes.
Disable the built-in battery
Follow the instructions to disable the built-in battery.
Step 1.
Restart your computer. When the logo screen is displayed, immediately press F1 to enter the UEFI
BIOS menu.
Step 2.
Select Config ➙ Power. The Power submenu is displayed.
Step 3.
Select Disable Built-in Battery and press Enter.
Step 4.
Select Yes in the Setup Confirmation window.
The built-in battery is disabled and the computer turns off automatically.
Wait three to five minutes to let the computer cool.
Note: If your computer cannot enter the UEFI BIOS menu, you cannot disable the built-in battery. To ensure
safety when you replace a CRU, it is recommended to do the following:
• For the built-in battery connected to the system board with cables: Disconnect the battery cables.
• For the CRUable built-in battery connected to the system board with comb connectors: Remove the
battery. For the removal procedure, refer to the built-in battery replacement instructions in this
documentation.
• For the non-CRUable built-in battery connected to the system board with comb connectors: Call Lenovo
Customer Support Center for help.
To check whether the built-in battery on your computer is a CRU, see the CRU list in Chapter 6 "CRU
replacement" on page 45.
Replace a CRU
Follow the instructions to replace a CRU.
Base cover assembly
Follow the instructions to replace the base cover assembly.
Before you start, read
Generic Safety and Compliance Notices
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 46.
46
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9User Guide
and print the following instructions.
Advertisement
Table of Contents
