Wireless Card; Removing The Wireless Card - Dell OptiPlex Micro Plus 7020 Owner's Manual
Hide thumbs
Also See for OptiPlex Micro Plus 7020:
- Owner's manual (140 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
Figure 27. Moving the screw mount to support a different form factor (OptiPlex Micro Plus 7020)
Steps
1.
NOTE:
Steps 1 and 2 are applicable if an M.2 2280 solid-state drive is being installed to replace the existing M.2 2230
solid-state drive.
Remove the screw mount from its current screw hole (2230) of the M.2 SSD PCIe connector (M.2 PCIe SSD-0 or M.2 PCIe
SSD-1).
2. Install the screw mount on the other screw hole (2280) of the M.2 SSD PCIe connector (M.2 PCIe SSD-0 or M.2 PCIe
SSD-1).
3.
NOTE:
Steps 3 and 4 are applicable if an M.2 2230 solid-state drive is being installed to replace the existing M.2 2280
solid-state drive.
Remove the screw mount from its current screw hole (2280) of the M.2 SSD PCIe connector (M.2 PCIe SSD-0 or M.2 PCIe
SSD-1).
4. Install the screw mount on the other screw hole (2230) of the M.2 SSD PCIe connector (M.2 PCIe SSD-0 or M.2 PCIe
SSD-1).
Wireless card
Removing the wireless card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure.
50
Removing and installing Customer Replaceable Units (CRUs)
Before working inside your
computer.
Hide quick links:
Advertisement
Table of Contents
