Advertisement
Quick Links
Advertisement
Summary of Contents for Lenovo MT-2420 S
- Page 1 MT2420 Lenovo MT-2420 Model S Installation Manual...
- Page 2 Accessories list Item Picture Spec Quantity Combine screws TWM5* 12, silver plated, flat tail Combine screws TWM4*12, electroplating silver, flat tail Plastic Iron gaskets，Ø 8mm*50 • Sinking tip tail, cross groove HA5 x 50 (bud • Self-tapping screws length), electroplating silver Iron gaskets Plating parts, 6 x 13 x 2MM •...
- Page 3 Accessories list Item Picture Spec Quantity Cross groove sink flat tail machine teeth ,KM4*8 screw Silver plated size: 220 x 158 x 20mm Wall-bracket size: 230 x 160 x 45mm Kiosk-bracket...
- Page 4 01 On the Wall Step 1：Install the wall-bracket on the wall. Step 2：Install the kiosk-bracket. Note: You can find the wall bracket and kiosk bracket in the shipping package.
- Page 5 01 On the Wall Step 3: Plug in power cable and net Step 4: Align the holes and hang the kiosk on cable. the wall-bracket, and screw the two brackets together.
- Page 6 02 On the Table Step 1：Install the U-shape frame to the Step 2: Screw the frame to fix the kiosk to the kiosk and tighten the screws. table.
- Page 7 03 On the Stand Step 1: Thread the power cable and Step 2: Install the wall-bracket. net cable through the route in the stand.
- Page 8 03 On the Stand Pull the kiosk Step 4: Hang the kiosk on the wall-bracket , and Step 3：Install the kiosk-bracket. pull the kiosk aside to plug in the cables.
- Page 9 03 On the Stand Step 5： Screw the two brackets together.
- Page 10 04 On the Cabinet Step 1: Thread the power cable and net Step 2: Install the wall-bracket. cable through the route in the cabinet.
- Page 11 04 On the Cabinet Pull the kiosk Step 4: Hang the kiosk on the wall-bracket , and Step 3：Install the kiosk-bracket. pull the kiosk aside to plug in the cables.
- Page 12 04 On the Cabinet Step 5： Screw the two brackets together.
- Page 13 Verify Install ⚫ Steps to test stability 1. Depending on the way the fixed equipment is used on the customer’s onsite； 2. Refer to Page4 Step4 or Page8 Step4 or Page12 Step5；Firstly, hang the device on the wall bracket to see if the overall level is horizontal； 3.
- Page 14 05 Power supply suggestion ⚫ In the installation site, need to provide independent power supply for the self-checkout Input: AC 110~220V power supply, ground wire must be connected to the earth; Between the main power supply and the self-service terminal, it should be protected by leakage protection switch. ⚫...
- Page 15 Printed in China ©Copyright Lenovo, 2020 All right reserved...