Advertisement
Disassembly Notice
Please be sure to pull out adapter and disconnect the battery.
Step 1 : Disconnect TP FFC connector and then remove TP FFC.
Step 2 : Remove the TP TOP SPONGE.
Step 3 : Remove the conductive tape *1pc and the screw (red circle) *3pcs.
Step 4 : Remove the TOUCHPAD MODULE.
1
Disconnect and remove
2
Remove
TOUCHPAD MODULE
3
Remove
Assembly Notice
If the CONDUCT TAPE is removed or it is crooked, wrinkle, Peel off, broken during disassembly, please paste a
new one. Here are some examples of conductive tapes that need to be replaced with new ones：
OK
NG
NG
For TOUCHPAD module assembly, please follow below location to paste the new TP CONDUCT TAPE.
Screws
QTY
3
SCREW M2*2L (7,0.55) (K) #1
4
Remove
OK
NG
NG
TP CONDUCT TAPE
Torque (kgf-cm)
Spec
1.8±0.2
21
Back
Advertisement
