Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
Ensure that the sweeper is only used on hard/dry surfaces.
9
Ensure that the dirt collection hopper is present and properly seated before commencing sweeping.
9
The sweeper is for indoor use only.
9
DO NOT leave the sweeper unattended, where it could become a hazard to other people or traffic in the sweeping area. For example, in
8
a warehouse situation.
DO NOT allow anyone to ride on the sweeper.
8
DO NOT use the sweeper for any purpose other than that for which it was designed.
8
DO NOT use the sweeper to clear up hazardous materials or any material that may damage the plastic chassis of the sweeper.
8
DO NOT use the sweeper on wet surfaces.
8
2. INTRODUCTION
Three brush system with 2 large disk brushes, paired with a large cylindrical brush for maximum cleaning efficiency. Suitable for
maintaining any hard floor, ideal for removing dirt, dust and debris from large surface areas. Adjustable height tubular handle with easy
to adjust angle to best suit the user. Built in carry handle for easy transportation. Large 20L waste collection bin is easy to remove and
empty.
3. SPECIFICATION
MODEL NO: ..................................................FSW70.V2
HOPPER CAPACITY: ............................................... 20L
OPERATING WIDTH: ......................................... 650MM
4. CONTENTS
© Jack Sealey Limited
650MM FLOOR SWEEPER
FSW70.V2
MODEL NO:
Original Language Version
Number
Components
1
Upper push bar
2
Lower push bar
3
Sweeping machine
4
Wheel
5
Waste container
6
Feeding brushes
7
Nut with quick release function
8
Cap
9
Support disc
10
Connection knob
11
Screw
FSW70.V2 Issue:1 03/01/24
Advertisement
Related Manuals for Sealey FSW70.V2
Summary of Contents for Sealey FSW70.V2
- Page 1 FSW70.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Clean the appliance regularly with a damp cloth and some soap. DO NOT use detergents or solvents; these could attack the plastic parts of the device. Make sure that no water can enter the inside of the appliance. 8. STORAGE 8.1. Store the appliance and its accessories in a dark, dry and frost-free place. The optimal storage temperature is between 5 and 30°C. © Jack Sealey Limited Original Language Version FSW70.V2 Issue:1 03/01/24...
- Page 3 PURCHASE HERE Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk FSW70.V2 Issue:1 03/01/24 Original Language Version...