Makita 3601B Instruction Manual
D-handle router
Hide thumbs
Also See for 3601B:
- Instruction manual (48 pages) ,
- Instruction manual (13 pages) ,
- Instruction manual (25 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Makita 3601B
Summary of Contents for Makita 3601B
- Page 1 INSTRUCTION MANUAL Router 3601B DOUBLE INSULATION Read before use.
- Page 2 SPECIFICATIONS Model 3601B Collet chuck capacity 12 mm or 1/2" No load speed (min 23,000 or 26,000 (See Nameplate on the tool) Overall height 190 mm Net weight 3.6 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
- Page 3 Personal safety Power tool use and care Stay alert, watch what you are doing and use Do not force the power tool. Use the correct common sense when operating a power tool. power tool for your application. The correct Do not use a power tool while you are tired or power tool will do the job better and safer at the under the influence of drugs, alcohol or med- rate for which it was designed.
- Page 4 The cutter bit shank must match the designed FUNCTIONAL collet chuck. Only use a bit that is rated at least equal to the DESCRIPTION maximum speed marked on the tool. Wear hearing protection during extended period of operation. CAUTION: Handle the router bits very carefully. •...
- Page 5 For tool with lock-off button Switch action To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. CAUTION: To start the tool, depress the lock-off button and pull the • Before plugging in the tool, always check to see switch trigger.
- Page 6 Straight guide OPERATION Set the tool base on the workpiece to be cut without the bit making any contact. Then turn the tool on and wait until the bit attains full speed. Move the tool forward over the workpiece surface, keeping the tool base flush and advancing smoothly until the cutting is complete.
- Page 7 Trimmer guide (Accessory) ► 1. Base plate 2. Templet guide Secure the templet to the workpiece. Place the tool on the templet and move the tool with the templet guide Trimming, curved cuts in veneers for furniture and the sliding along the side of the templet. like can be done easily with the trimmer guide.
- Page 8 Connecting a vacuum MAINTENANCE cleaner CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspec- tion or maintenance. • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
- Page 9 CAUTION: • These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 10 "V"Grooving bit Board-jointing bit 1/4" Drill point flush trimming bit Corner rounding bit Chamfering bit Drill point double flush trimming bit 10 ENGLISH...
- Page 11 Cove beading bit Ball bearing chamfering bit 1/4" Ball bearing flush trimming bit Ball bearing beading bit 1/4" Ball bearing corner rounding bit 1/4" 11 ENGLISH...
- Page 12 Ball bearing cove beading bit Ball bearing roman ogee bit Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 883011J8 www.makita.com 20211108...