Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > IMG-FIX
TMP-TBL3
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
TMP-TBL4
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Amount of Change per
Unit
TMP-TBL5
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
Set fixing control temp: heavy paper 2
To set the offset of fixing control temperature for heavy paper 2 (129 to 150 g/m2).
As the value is changed by 1, the control temperature is changed by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the value when fixing offset occurs.
When a fixing failure/offset occurs
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Be sure to change the value a little at a time. Otherwise, fixing failure/offset occurs when setting
an extreme value.
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
0
5
Set fixing control temp: heavy paper 3
To set the offset of fixing control temperature for heavy paper 3 (151 to 163 g/m2).
As the value is changed by 1, the control temperature is changed by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the value when fixing offset occurs.
When a fixing failure/offset occurs
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Be sure to change the value a little at a time. Otherwise, fixing failure/offset occurs when setting
an extreme value.
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
0
5
Fixing control temperature: Thin ppr
To set the offset of fixing control temperature for thin paper (60 to 63 g/m2).
As the value is incremented by 1, the control temperature changes by 5 deg C from the specified
value.
Increase the value when a fixing failure occurs.
Decrease the value when fixing offset occurs.
When offset/fixing failure occurs on thin paper
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
Be sure to change the value a little at a time. Otherwise, offset/image failure occurs when setting
an extreme value.
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
deg C
0
5
773
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
