Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > ACC
MAX-PRC
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
SRL-SPSW
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
PDL-THR
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
CR-TYPE
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set of Coin Manager maximum price
To set the maximum amount to be handled with Coin Manager.
Enter 8800 when specifying 8800 Japanese yen as the maximum amount to be handled with the
Coin Manager that supports Japanese yen.
At installation of Coin Manager
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
This mode is enabled when selecting 4 for the following: COPIER> OPTION> ACC> COIN.
0 to 9999
8800
COPIER> OPTION> ACC> COIN, UNIT-PRC
When a value larger than the maximum amount is entered in Settings/Registration menu as the
charging amount, it causes an error.
Setting of Serial I/F Kit support
To set the support level of the Serial Interface Kit.
To keep processing performance of printer engine, select "1: Priority on speed".
To correctly stop the output by the upper limit number of sheets, select "2: Priority on upper limit
number of sheets".
At installation of Serial Interface Kit
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
With priority on speed, output cannot be correctly stopped by the upper limit number of sheets.
With priority on the upper limit number of sheets, processing performance of the printer engine is
decreased depending on pickup location.
0 to 2
0: No support, 1: Priority on speed, 2: Priority on upper limit number of sheets
0
Norm PDL pnt set:External charge mode6/7
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set normal PDL print job processing at external charge mode 6/7.
When 1 is set and external charge mode 6/7 is set with COIN, normal PDL print job is executed
without being cancelled.
When setting the normal PDL print processing in external charge mode 6/7
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Cancel, 1: Execute
0
COPIER> OPTION> ACC> COIN
Setting of Card Reader
To set the model of the Card Reader.
Set 1 in the case of connecting the Card Reader-C1. It operates even 0 is set, but recognition rate
decreases.
When connecting the Card Reader-C1
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Card Reader-F1, 1: Card Reader-C1
0
813
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
