Brother DCP-T230 Quick Setup Manual

Hide thumbs Also See for DCP-T230:

Download this manual

Read the Product Safety Guide ﬁrst, then read this Quick Setup Guide for the correct installation procedure.

If you selected [[4-B] Set up from the control panel on the machine] in the printed Quick Setup

Guide included with the machine, go to [4-B].

Unpack the machine and

check the components

Remove the protective tape and the film covering

the machine.

NOTE

• The illustrations in this guide may not match your model

exactly, but the steps are the same for each model.

• Save all packing materials and the box in case you need to

ship your machine.

• We recommend using a USB 2.0 cable (Type A/B) that is no

more than 2 metres long.

Continue to the next column

Quick Setup Guide

DCP-T230 / DCP-T236 / DCP-T238

DCP-T430W / DCP-T435W / DCP-T436W / DCP-T439W

Operation Videos:

www.95105369.com

Inbox Ink

Power Cord

Bottles*4

User's

USB Cable

Guide

Installation & Using Videos

Load plain A4 paper in the

paper tray

CHN-ENG

Version 0

Page 1 Quick Setup Guide DCP-T230 / DCP-T236 / DCP-T238 DCP-T430W / DCP-T435W / DCP-T436W / DCP-T439W CHN-ENG Version 0 Operation Videos: Installation & Using Videos www.95105369.com Read the Product Safety Guide ﬁrst, then read this Quick Setup Guide for the correct installation procedure.
Page 2 (To set up your machine using a Mac, follow the instructions in section [4-B].) Go to the website applicable to your setup method: (DCP-T230/DCP-T236/DCP-T238) Choose Set up with your computer. Set up with your mobile device ® * The mobile device must be connected to Wi-Fi setup.brother.com...
Page 3 Slide the bottle onto the pin at the angle shown in (2) until the cap is flush with the ink tank surface. Fill the ink tanks with inbox (You will hear a click when you insert it for the first time.) The bottle will support itself when in the correct position and the ink will fill the tank automatically.

Dcp-t236 Dcp-t238 Dcp-t430w Dcp-t435w Dcp-t436w Dcp-t439w