Advertisement
Quick Links
NEC Versa LitePad Tablet PC
512-MB Memory Module
The 512-MB Memory Module upgrades the NEC Versa LitePad™ Tablet PC memory from
256 MB to 512 MB. The memory upgrade slot is located on the back of your tablet PC.
See the following procedure to upgrade system memory.
electricity from yourself by touching a nearby unpainted metal surface.
1.
Power off the system, disconnect AC power, remove the battery pack (see Chapter 2 in
the NEC Versa LitePad Tablet PC User's Guide), and disconnect any peripheral
devices.
Locate the screw securing the memory bay cover to the bottom of the tablet PC.
2.
Remove the screw and lift off the memory bay cover.
Note
Removing the memory bay cover screw requires a very small tip Phillips
screwdriver.
3.
Remove the installed memory module as follows.
Press the locking tabs away from the sides of the module until the module pops up
at an angle (see the following figure).
Pull the memory module out of the slot along the angle and store it in a static-free
bag.
Before handling any internal components, discharge static
Locating the memory bay cover
A – Memory Bay Cover
NEC Versa LitePad Tablet PC 512-MB Memory Module 1
B – Screw
Advertisement
Related Manuals for NEC VERSA LITEPAD TABLET PC 512-MB MEMORY MODULE
Summary of Contents for NEC VERSA LITEPAD TABLET PC 512-MB MEMORY MODULE
- Page 1 NEC Versa LitePad Tablet PC 512-MB Memory Module The 512-MB Memory Module upgrades the NEC Versa LitePad™ Tablet PC memory from 256 MB to 512 MB. The memory upgrade slot is located on the back of your tablet PC. See the following procedure to upgrade system memory.
- Page 2 AC adapter power cable. Information in this publication is subject to change without notice. Versa LitePad is a trademark of NEC Solutions (America), Inc. NEC and Empowered by Innovation are either registered trademarks or trademarks of NEC Corporation. All other trademarks and registered trademarks are the property of their respective owners.