Exit Screen; Entering The Uefi Boot Manager; Using The Uefi Boot Manager Navigation Keys - Dell PowerEdge R210 Hardware Owner's Manual
Dell server hardware owner's manual
Hide thumbs
Also See for PowerEdge R210:
- Getting started with (111 pages) ,
- Information update (14 pages) ,
- Technical manual (72 pages)
Table of Contents
Advertisement
Exit Screen
Press <Esc> to exit the System Setup program; the Exit screen displays:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup
Entering the UEFI Boot Manager
NOTE:
Operating systems must be 64-bit UEFI-compatible (for example, Microsoft
Windows Server
and 32-bit operating systems can only be installed from the BIOS boot mode.
NOTE:
The Boot Mode must be set to UEFI in the System Setup program to access
the UEFI Boot Manager.
The UEFI Boot Manager enables you to:
•
Add, delete, and arrange boot options
•
Access the System Setup program and BIOS-level boot options without
rebooting
To enter the UEFI Boot Manager:
1 Turn on or restart your system.
2 Press <F11> after you see the following message:
<F11> = UEFI Boot Manager
NOTE:
If your operating system begins to load before you press <F11>, allow the
system to finish booting, and then restart your system and try again.
Using the UEFI Boot Manager Navigation Keys
Keys
Up arrow
Down arrow
Spacebar, <Enter>, <+>,
–
<
>
®
2008 x64 version) to be installed from the UEFI boot mode. DOS
The system will not respond until the USB keyboard is active.
Action
Moves to and highlights the previous field.
Moves to and highlights the next field.
Cycles through the settings in a field.
Using the System Setup Program and UEFI Boot Manager
®
49
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
