Replacing the Optical Drive
1 Slide the optical drive into the bay.
2 Replace and tighten the locking screw.
Hinge Cover
CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
from the battery bay before you begin working inside the computer.
Removing the Hinge Cover
1 Follow the procedures in "Before You Begin" on page 153.
2 Open the display as far as it will open.
NOTICE:
simultaneously.
3 Insert a plastic scribe into the indent to lift the hinge cover on the right side.
4 Ease the hinge cover up, moving from right to left, and remove it.
160
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
To avoid electrostatic discharge, ground yourself by using a wrist
To help prevent damage to the system board, you must remove the battery
To avoid damage to the hinge cover, do not lift the cover on both sides