Replacing The Msata Card; Procedure; Postrequisites - Dell Inspiron 15z Owner's Manual
Owner's manual (pdf)
Hide thumbs
Also See for Inspiron 15z:
- Setup manual (52 pages) ,
- Quick start manual (2 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Replacing the mSATA Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Align the notch on the mSATA card with the tab on the system-board connector.
2
Insert the mSATA card at a 45-degree angle into the system-board connector.
3
Press the mSATA card down and replace the screw that secures the mSATA card to
the system board.
Postrequisites
1
Follow the instructions from step 3 and step 7 in "Replacing the System Board" on
page 61.
2
Replace the hard-drive assembly.
See "Replacing the Hard-Drive Assembly" on page 39.
3
Replace the battery. See "Replacing the Battery" on page 35.
4
Replace the palm-rest. See "Replacing the Palm-Rest" on page 31.
5
Replace the keyboard. See "Replacing the Keyboard" on page 25.
6
Replace the optical-drive assembly.
See "Replacing the Optical-Drive Assembly" on page 19.
7
Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"
on page 15.
8
Follow the instructions in "After Working Inside Your Computer" on page 9.
Replacing the mSATA Card
65
|
Hide quick links:
Advertisement
Table of Contents
