NEC NP-P350W Installation And Assembly Manual
Universal ceiling mount
Hide thumbs
Also See for NP-P350W:
- User manual (222 pages) ,
- Installation manual (6 pages) ,
- Quick setup manual (6 pages)
Advertisement
Read instruction sheet before you start installation and assembly.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
IMPORTANT! Turn to the appropriate page for your ceiling installation.
Table of Contents
Parts List .............................................................................................................................................................................. 2
To Wood Joist Finished Ceilings, Exposed Wood Joists or Wood Beam Ceilings ................................................................ 4
To Concrete Ceilings ............................................................................................................................................................. 5
Flush Mount .......................................................................................................................................................................... 6
Extension Column ................................................................................................................................................................ 7
Attaching Universal Adapter Plate to Projector ..................................................................................................................... 8
Visit the Peerless Web Site at www.peerlessmounts.com
Installation and Assembly - Universal
Ceiling Mount
WARNING
1 of 9
Maximum Load Capacity: 50 lb (22.7 kg)
ISSUED: 04-11-06 SHEET #: 055-9458-6 09-25-09
For customer care call 1-800-729-0307 or 708-865-8870.
Model: NP01UCM
Advertisement
Table of Contents
Related Manuals for NEC NP-P350W
Summary of Contents for NEC NP-P350W
-
Page 1: Table Of Contents
Installation and Assembly - Universal Model: NP01UCM Ceiling Mount Maximum Load Capacity: 50 lb (22.7 kg) Read instruction sheet before you start installation and assembly. WARNING • Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. -
Page 2: Parts List
Before you start check the parts list to insure all of the parts shown are included. Parts List Description Qty. Part Number A ball and socket mount 055-0016 B 4 mm security allen wrench 560-9646 C M5 x .8 x 10 mm socket pin type F screw 520-2031 D #10-32 x 3/8"... - Page 3 Compatability Chart for NEC Projectors Manufacturer Model LT280 LT380 NP110 NP215 NP300 NP310 NP400 NP410 NP410W NP500 NP500W NP500WS NP510 NP510W NP510WS NP600 NP600S NP610 NP610S NP901W NP905 NP1000 NP1200 NP1150 NP1250 NP2000 NP2150 NP2200 NP2250 NP3150 NP3250 NP3151W NP3150W...
-
Page 4: To Wood Joist Finished Ceilings, Exposed Wood Joists Or Wood Beam Ceilings
Installation To Wood Joist Finished Ceilings, Exposed Wood Joists, or Wood Beam Ceilings WARNING • Tighten wood screws (F) so that ceiling plate (G) is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. •... -
Page 5: To Concrete Ceilings
Installation to Concrete Ceilings WARNING • When installing ceiling mounts on concrete, verify that you have a minimum of 1 5/8" of actual concrete surface in the 1/4" diameter hole to be used for the concrete anchors. Do not drill into mortar joints! Concrete must meet ASTM C-90 specifications. -
Page 6: Flush Mount
Flush Mount Application Screw ball and socket mount (A) into ceiling plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1. -
Page 7: Extension Column
Installation to Extension Column Screw extension column to ceiling plate (G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B). -
Page 8: Attaching Universal Adapter Plate To Projector
Attaching Universal Adapter Plate to Projector NOTE: The projector you are installing may differ in appearance from the sample illustrated below. Place projector upside down. Locate adapter plate (L) with notch facing forward as close to projector center of gravity as possible without covering any mounting holes. Loosen channels, and if there are only three mounting holes remove fourth channel. - Page 9 NOTE: The projector adapter plate and projector you are installing may differ in appearance from the sample illustrated below. To adjust roll, pitch, and yaw loosen the set screw Attach projector, with adapter plate already on it, to the (shown below) using security allen wrench (B) or ball and socket mount (A) by inserting the ball and standard 4 mm allen wrench.