TSD ■ Service Manual 1 Equipment Need NO# Equipment ASUS Part# Supplier Quantity Remarks Description Computer None None SIM Card None None P527 80A-S5G1003 ASUS Battery 07G016043459 ASUS download 14G000506200 ASUS cable Screwdriver 16-T00362002 ASUS (T5) Tweezers 16-000600014 ASUS Plastic...
FM radio. Users can enjoy latest news and music. RSS Reader can help to receive up-to-date news or message without active access. ASUS ZIP makes users not to worry if the download file is compressed or not, just one click to open it.
TSD ■ Service Manual 2.3 Product Specification Networking EDGE/GPRS/GSM 850/900/1800/1900 system EGPRS Class B, Multi-slot Class 10 Operating System Microsoft Windows Mobile 6 Professional TI OMAP 850 (200MHz) Dimensions 113 x 58 x 15.4 mm, 125g Battery 1300 mAh Lithium-Ion Talk time 4-5 hour Standby time...
TSD ■ Service Manual 3 Disassembly / Assembly Procedure 3.1 Introduction This section describes how to disassemble PDA P527. Many of the integrated devices used in this phone are vulnerable to damage. Ensure adequate static protection is in place when handling, shipping, and servicing any internal components.
TSD ■ Service Manual 3.1.2 Disassembly Procedure The following set of diagrams will demonstrate the correct sequence and action to disassemble P527. Step 1 Take the stylus away from the PDA. Step 2 Remove the battery case and take the battery away. Step 3 Take off the antenna cover by plastic blade.
Page 8
TSD ■ Service Manual Step 4 Unscrew and remove 4 screws on PDA by screw driver. Step 5 Please switch the “Hold” key as the arrowhead shows. Then separate the middle cover from front cover by plastic blade. V1.0...
Page 9
TSD ■ Service Manual Step 6 Remove the speaker by a pair of tweezers. Step 7 Remove the vibrator by a pair of tweezers. V1.0...
Page 10
TSD ■ Service Manual Step 8 Release the antenna FPC by a pair of tweezers. Then tear off the antenna FPC from middle cover by hand. Step 9 Open the LCM connector by plastic blade and release the LCM FPC by a pair of tweezers. Step 10 Separate the main board from front cover.
Page 11
TSD ■ Service Manual Step11 Open the camera connector by plastic blade and remove it from main board by hand. Step12 Open the touchpad FPC connector and release the FPC by a pair of tweezers. V1.0...
Page 12
TSD ■ Service Manual Step13 Take the touchpad FPC away. Pay attention to the hooks. The FPC should be released from them first. Step14 Take off the MIC rubber and joy stick key by a pair of tweezers. V1.0...
Page 13
TSD ■ Service Manual Step15 Take off the keypad by hand. Step16 Remove the two top bezel rubbers by a pair of tweezers and then take the LCD module away. V1.0...
Page 14
TSD ■ Service Manual Step17 Remove the receiver by a pair of tweezers. V1.0...
TSD ■ Service Manual 3.1.3 Assembly Procedure It is carried out in the exact reverse sequence as the disassembly. Step 1 Install the receiver on the front cover by a pair of tweezers. Step 2 Install the LCM on the front cover and place two top bezel rubbers to fix the LCM. V1.0...
Page 16
TSD ■ Service Manual Step 3 Install the keypad and arrange the keypad properly in the front cover. Step 4 Install the joystick key and MIC rubber by a pair of tweezers. Step 5 Install the keypad FPC on main board and press gently to arrange it into the hooks. V1.0...
Page 17
TSD ■ Service Manual Step 6 Connect the keypad FPC with main board by a pair of tweezers and close the connector by plastic blade. Step 7 Install the camera by hand and close its connector by plastic blade. Step 8 Install the main board on front cover and press gently to fix it into the hook.
Page 18
TSD ■ Service Manual Step 9 Connect the LCM FPC by a pair of tweezers and close its connector by plastic blade. Step 10 Install the antenna FPC on middle cover and then arrange it by plastic blade. V1.0...
Page 19
TSD ■ Service Manual Step 11 Install the vibrator by a pair of tweezers. Step 12 Then install the speaker by a pair of tweezers. Step 13 Install the middle cover and press four sides to lock it into the hooks. Pay attention to the “Hold”...
Page 20
TSD ■ Service Manual Step 14 Secure 4 screws on middle cover by screw driver. V1.0...
Page 21
TSD ■ Service Manual Step 15 Install the antenna cover and press to fix it. Step 16 Place the battery back and install the battery cover. Step 17 Insert the stylus. V1.0...