Before installing this product, read the Safety information. DANGER To avoid shock hazard: v Do not remove the covers. v Do not operate this product unless the stand is attached. v Do not connect or disconnect this product during an electrical storm. v The power cord plug must be connected to a properly wired and grounded power outlet.
Product overview This section will provide information on adjusting monitor positions, setting user controls. Adjusting the tilt The illustration below shows the tilt range of the monitor. For more information, please see “Positioning your monitor” on page 2-1. Monitor controls Your monitor has controls on the front which are used to adjust the display.
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Please see the instructions that come with the cable lock to learn how to using it. Setting up your monitor This section provides information on how to set up your monitor.
Page 8
Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer. Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets. Chapter 1.
Page 9
Power on the monitor and the computer. Reference and Driver CD To install the monitor driver, insert the , click Install driver, and follow the on-screen instructions. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes.
• Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. • Keep your monitor screen clean so you can focus on the screen’s contents. Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax.
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Using the On-Screen Display (OSD) controls To adjust the settings, the user controls can be viewed through the OSD. To use the controls: Press to open the main OSD menu. 2. Use to move among the icons. Select an icon and press to access that function.
Page 14
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) Adjusts overall brightness Same as Analog Brightness Brightness/ Contrast Adjusts difference between light and dark areas Contrast Moves the image left or right Controls Locked - not required for Horizontal Position...
Page 15
Table 2-2. OSD functions Controls and Controls and OSD Icon on Main Adjustments Adjustments Menu Submenu Description (Analog) (Digital) This monitor can accept video signals through two Same as Analog different connectors. Most desktop computers use Input video signal a D-SUB connector. Select digital among OSD Controls when you use DVI connector - Selects D-SUB (Analog) - Selects DVI (Digital)
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Chapter 3. Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model L2060 Wide Dimensions Height 370.7 mm (14.59 in) Depth 170.1 mm (6.69 in) Width 476.0 mm (18.74 in)
Page 20
Table 3-1. Monitor specifications for type-model L2060 Wide Communications VESA DDC Supported Display Modes Horizontal frequency 30 kHz - 83 kHz(Pixel clock <210MHz) (VESA Standard modes Vertical frequency 50 Hz - 76 Hz(Pixel clock <210MHz) between noted ranges) Native Resolution...
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Table 3-2. Troubleshooting Problem Possible cause Suggested action Reference The power The video signal cable Be sure the video cable is “Connecting and indicator is is loose or connected with the turning on your blue, but there disconnected from the system properly monitor”...
Installing the monitor driver in Windows Vista To use the Plug and Play feature Microsoft Windows Vista, do the following: Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.
Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1600x900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.