All-in-One Desktop PC
Unpack
1.
Computer
2.
Mouse
3.
Power cord
4.
Keyboard
6.
Remote control (Selected models only)
1
2
4
5
Version: 1.0
31040254B
Initial setup instructions
1)
Adjust the angle for the best viewing experience. It can be rotated
between 15 degrees and 35 degrees from the vertical.
The computer stand must remain
installed at all times to ensure
maximum system stability.
Make sure the angle of the
computer is at least 15 degrees
from the vertical; otherwise the
computer will be unstable and
could fall over.
To open the computer stand,
refer to the illustration:
2)
If the computer is configured
with a wired keyboard and
mouse, connect the keyboard
5.
User manual
and mouse cables to the
3
appropriate keyboard (PS/2
connector) and mouse
connectors (USB connector).
6
3)
Connect the power cord to the computer and the electrical outlet
as shown below.
If the computer is configured with
a wireless keyboard and mouse,
4)
setup the keyboard and mouse
Press the power button on the side of the computer to turn it on.
wireless connection.(For more
details refer to the back of this
poster).