Table of Contents
Advertisement
4
2
2-20
Printing on Plain Paper/Heavy Paper/Label/Transparency
•
When fanning or aligning the transparencies, try to hold the edges to avoid
touching the printing surface.
•
Take care not to mark or stain the printing surface of the transparencies with
fingerprints, dust, or oil. This may result in poor print quality.
•
Only standard type labels (label standard card) can be loaded in the cassette. Load
labels other than the standard type (label standard card) in the manual feed slot.
Load the paper stack so that the rear edges touch the paper
guide.
CAUTION
When loading paper, be careful not to cut your hands with the edges of the
paper.
IMPORTANT
•
Make sure that the paper guide is at the appropriate position of paper size. If the
paper guide is not adjusted properly, this may result in misfeeds.
•
Misfeeding may occur frequently if the cutting edges of the paper stack are not
smooth. In this case, thoroughly fan the paper stack, and then align the edges of
the paper stack on a flat surface.
Thoroughly fan in small batches.
Tap the edges on a flat
surface a few times.
Advertisement
Table of Contents
Troubleshooting
