1. With the fan power cable oriented downward, align the rubber grommets in the fan with the holes in each corner of the processor airflow shroud, then

pull the grommets through until they snap into place.

NOTE:

Airflow direction and orientation are shown on the side of the fan.

rubber grommet (4)

2. Replace the processor airflow shroud (see

3. Connect the fan cable to the FAN1_CPU connector on the system board (see

4. Replace the computer cover (see

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into your computer.

5. Connect your computer and devices to electrical outlets, and then turn them on.

Removing the Optional Hard Drive Fan

1. Follow the procedures in

Before You

2. Remove the computer cover (see

3. Remove all installed memory modules (see

4. Disconnect the fan cable from the FAN_HDD connector on the system board (see

5. Press the release latch on the hard drive fan and slide it out from between the hard drive bays, then lift it from the computer.

CPU fan

processor airflow shroud

Installing the Processor Airflow

Replacing the Computer

Cover).

Begin.

Removing the Computer

Cover).

Removing

Memory).

Shroud).

System Board

Components).

System Board

Components).

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

This manual is also suitable for:

Xps m2010 pp03x

Installing The Cpu Fan - Dell XPS M2010 Service Manual