hit counter script

Removing The Memory Module(S); Replacing The Memory Module(S) - Dell Inspiron M5030 Service Manual

Service guide
Hide thumbs Also See for Inspiron M5030:
Table of Contents

Advertisement

Back to Contents Page
  Memory Module(s)
Dell™ Inspiron™ N5020/M5030/N5030 Service Manual 
  Removing the Memory Module(s)
  Replacing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in your Setup Guide for information on the
type of memory supported by your computer.
NOTE:
Memory modules purchased from Dell™ are covered under your computer warranty.
Your computer has two user-accessible SODIMM connectors.
 Removing the Memory Module(s)
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the keyboard (see
 
CAUTION:
To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.
 
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
 
5. Remove the memory module from the memory-module connector.
1
memory-module connector
3
memory module
 Replacing the Memory Module(s)
 
CAUTION:
If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you
install a memory module in the connector labeled "DIMM B."
 
1. Follow the instructions in
Before You
Begin.
Battery).
Removing the
Keyboard).
2
securing clips (2)
Begin.
Removing the
Battery) before working inside the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron n5030Inspiron n5020

Table of Contents